logo

X46cr13/4Cr13 Materiaal LL Type Vinstubing voor Energiebesparende Stoomspiralen

Plaats van herkomst:China
Merknaam:DELLOK Yonghui
Certificering:CE
Modelnummer:X46cr13/4Cr13
Minimale bestelhoeveelheid:1 meter
Prijs:$10 - 100 /Piece/Pieces
Betalingsvoorwaarden:T/T, L/C, D/A, D/P, Western Union,
Leveringscapaciteit:10000 stuks per maand
Productdetails
Markeren:

Stoomspellen met vinnenbuis

Raw Material :: X46cr13/4Cr13
Trademark:: DELLOK
Production Capacity;: 5000 stuks/jaar
Voltage:: Op maat
Controlling Mode:: CNC-machines
Energy Saving: Energiebesparing
Productbeschrijving

DELLOK LL Type Finned Tube is engineered for steam coil applications, delivering reliable heat transfer performance with enhanced corrosion protection.Gemaakt door YONGHUI RADIATING PIPE MANUFACTURING CO.., LTD., this finned tube combineert precision winding technology with high-grade materials to meet the demands of industrial heat exchange systems.

Over DELLOK (Yonghui Radiating Pipe Manufacturing Co., Ltd.)

Etablished in 2002 and located in Jiangsu, China, DELLOK has grown into a substantial manufacturing enterprise with 66 million yuan in fixed assets, over 200 employees, and 33 technical specialists.Onze productie-infrastructuur omvat 4 aluminium verwerkingslijnen met een jaarlijkse capaciteit van meer dan 20,000 ton, 5 tube-drawing lines, and 47 fin tube production lines including an imported McElroy line from the United States yielding an annual output capacity of over 12 miljoen meter.

Onze productie werkplaats opereert onder een nauwkeurig, gestandaardiseerd management systeem met systematische kwaliteitsborging op elk stadium.Quality control at DELLOK is not limited to final inspection (kwaliteitscontrole bij DELLOK is niet beperkt tot eindinspectie)Het gaat om het gehele productieproces, waarbij elke partij van de buizen wordt bemonsterd, getest en geregistreerd als kwaliteitsgarantie voor het eindproduct.

L / LL / KL Finned Tube Product Range
KL Finned Tube (Knurled Aluminium Tubing)

Manufactured similarly to the L fin type, except the base tube is knurled before wrapping the L-shaped fin strip.de voet is ook geknurled onto the base tube to increase bonding between tube and fin, resulterend in verbeterde warmteoverdrachtsprestaties.

  • Maximale werkingstemperatuur: 260 °C
  • Buismateriaal: geen theoretische limiet
  • Fin materiaal: aluminium of koper
L Vinnige buis

Aluminium fin strip is formed into an L shape and then tension-wound onto the base tube.

  • Maximale werkingstemperatuur: 150 °C
  • Fin materiaal: aluminium of koper
  • Buismateriaal: geen theoretische limiet
LL Finned Tube

Aluminium fin strip is formed into an L shape and tension-wound onto the tube with overlapping fins, providing improved corrosion resistance over the standard L type.

  • Maximale werktemperatuur: 180 °C
  • Fin materiaal: aluminium of koper
  • Buismateriaal: geen theoretische limiet
Diagram comparing L, LL, and KL finned tube configurations with fin overlap and knurled base tube details
Vervaardigingsproces

Applied fin tube is manufactured with strip wrapped under tension around the base of the tube.Ensuring secure attachment and consistent thermal contact.

Illustration of the fin strip tension-winding process onto a base tube with welded strip ends
Voordelen door Fin Type
L Vinnige buis
  • Geschikt voor lage temperatuur toepassingen.
  • Meest kosteneffectieve fijningsmethode in vergelijking met andere soorten.
  • Gebrekkige vinnen kunnen gemakkelijk worden verwijderd tijdens de productie, en de blote buis kan worden hergebruikt voor de vinnen.
  • Er is geen spiraalgroef nodig op de kernbuis.
  • Fins can be applied to very thin-walled tubes ¢ vooral wenselijk when using expensive alloys as the core tube.
  • Stoort temperaturen tot 130 °C zonder risico op atmosferische corrosie of thermische stress.
LL Finned Tube
  • Often gebruikt als een alternatief voor de duurdere extrudeerde fijne type in corrosieve omgevingen.
  • Maximale werktemperatuur: 170 °C.
KL Finned Tube
  • Korrosiebestendige buizen.
  • Vibratieweerstand.
  • Houdt temperaturen tot 320 °C (608 °F) tegen.
  • High thermal performance and stress resistance combined with protection from air corrosion - een unieke combinatie.
  • Elke vorm van gevinst buis kan worden vervangen met de KL-type.
Close-up view of KL type knurled finned tube showing fin-to-tube bonding detail
L / LL / KL Finned Tube Properties
Atmosferische corrosiebestendigheid Goed.
Mechanische weerstand Armoedige
Einde contact Interferentie geschikt
Fin-to-Tube Bond Gematigd
Efficiëntie van de warmteoverdracht Gematigd
Performance properties chart for L, LL, and KL finned tubes
Toepassingen
  • Petroleum, chemische en petrochemische procesindustrieën
  • Natuurgasbehandeling
  • Staalindustrie: hoogovens en convertersystemen
  • Energieopwekking: condensatie van stoomturbine-uitlaatgassen
  • Contactcondensatie met koeling van circulerend condensat
  • Fossiele en nucleaire energiecentrales
  • Airconditioning (Freon, ammoniak, propaan)
  • Verbranding van huishoudelijk afval
  • Compressorkoelers en soortgelijke warmte-uitwisselingsapparatuur
Industrial application of finned tubes in a heat exchanger system
Knurled aluminum tube used in finned tube manufacturing
Productspecificaties

Productcategorieën: L/LL/KL Finned Tube

Vinnentype L / LL / KL Finned Tube
Buismateriaal Carbon steel, stainless steel, koper, aluminium
Vinnenmateriaal koper, aluminium
Flipperbuislengte Geen limiet
Werktemperatuur 230 °C
Kenmerken Winding process with high production efficiency, uniform fin spacing, good heat transfer, high fininization ratio, and protection of the base tube from air erosion (Windingproces met hoge productie-efficiëntie, uniforme fijnspacing, goede warmteoverdracht, hoge afwerking, en bescherming van de basisbuis van luchterosie)
L type finned tube with L-shaped aluminum fin strip wound onto base tube
Het begrijpen van de fijnbuizen

Deze vinnen fungeren als een mechanisme voor het overbrengen van warmte van het materiaal binnen de buis naar of van de omringende ruimte.Finned tubes are used in applications where heat is transferred from a hot fluid to a cooler fluid through the tube wall. Vinnige buizen worden gebruikt in toepassingen waar warmte wordt overgedragen van een hete vloeistof naar een koelere vloeistof door de buiswandDe snelheid van warmteoverdracht is afhankelijk van drie factoren:

  • Het temperatuurverschil tussen de twee vloeistoffen.
  • De coëfficiënt van warmteoverdracht tussen elke vloeistof en de muur.
  • De oppervlakte van blootstelling aan vloeistof.
Cross-sectional diagram of L, LL, and KL finned tube construction
L Type Finned Tube

Adopting the winding process, production efficiency is high, fin spacing is uniform, heat transfer is good, the finishing ratio is high, and the base tube is protected from air erosion.The aluminum or copper fin strip is folded into an L shape and continuously spirally wound onto the outer surface of the base tube under tension De aluminium of koperen fijn strip is gevouwen in een L-vorm en continu spirally gewonden op het buitenste oppervlak van de basis buis onder spanning.

  • Maximale werktemperatuur: 150 °C (302 °F)
  • Atmosferische corrosiebestendigheid: aanvaardbaar
  • Mechanische weerstand: slecht
  • Common fin materials: aluminium en koper
L type finned tube with L-shaped fin strip wound under tension on base tube
LL Type Finned Tube

Building on the L-shaped foundation, the fin root completely covers the outer surface of the base tube. Tot op zekere hoogte garandeert dit dunne type betere corrosiebestendigheid.

  • Maximale werktemperatuur: 180 °C (356 °F)
  • Atmosferische corrosiebestendigheid: aanvaardbaar
  • Mechanische weerstand: slecht
  • Common fin materials: aluminium en koper
LL type finned tube with overlapping fin roots covering the base tube surface
KL-type Finned Tube

Voor de vinnen zijn continu gewond onto the steel pipe surface, the outer surface of the base pipe undergoes a knurling process.De wortel van de uiteinde bevestigd aan de staalpijp is ook knurled om de band tussen pijp en uiteinden te versterkenDeze fijne vorm zorgt voor betere warmteoverdracht dan L- en LL-typen.

  • Maximale werktemperatuur: 260 °C (500 °F)
  • Atmosferische corrosiebestendigheid: aanvaardbaar
  • Mechanische weerstand: slecht
  • Common fin materials: aluminium en koper
KL type knurled finned tube showing knurled base tube and fin root bonding
L / LL / KL Finned Tube Applicaties

Meestal gebruikt in luchtkoelers in petrochemische, elektrische energie, papier maken, tabak, en gebouw verwarming industrieën,as well as air heaters and air heaters in spray drying systems such as vegetable protein and starch in the food industry (zoals luchtverwarmers en luchtverwarmers in sproeidroogsystemen zoals plantaardig eiwit en zetmeel in de voedselindustrie). Additionele toepassingen zijn blast furnace and converter systems, power generation (condensate exhaust gas from steam turbines, condensate contact cycle cooling condensation),fossiele en nucleaire energiecentrales, airconditioners (Freon, ammoniak, propaan), waste incineration equipment, and compressor coolers.

We customise finned tubes according to individual customer requirements. Voor meer details over L/LL/KL finned tubes, please inquire with us.

Knurled aluminum tubing used in industrial finned tube applications
Vaak gestelde vragen
V: Wat is uw productietijd?

A: In het algemeen vereisen monsters 1 ‰ 3 dagen, en massaproductie vereist 15 ‰ 30 dagen, afhankelijk van uw verzoek.

V: Wat is de garantie voor uw producten?

A: Wij bieden een garantie van één jaar op onze producten.

V: Welke betalingsvoorwaarden accepteren jullie?

A: Handelsgarantie, TT en Western Union.

V: Wat zijn de vervoerswijzen voor machines?

A: Luchtvracht, zeevracht, expressbezorging en andere methoden. We kiezen de meest geschikte vervoermethode volgens uw vereisten.

U mag ook van houden
Kwaliteit TP304L Weerstand Gelaste Geperforeerde Vinnen Longitudinale Vintube voor Warmtewisselaars fabriek

TP304L Weerstand Gelaste Geperforeerde Vinnen Longitudinale Vintube voor Warmtewisselaars

TP304L Langsbuis met Vinnen De TP304L Langsbuis met Vinnen is een hoogwaardig warmteoverdrachtcomponent, ontworpen voor veeleisende industriële toepassingen. Vervaardigd met precisie weerstandslassen, zijn de langsvinnen stevig aan de kern plain tube gebonden, wat zorgt voor superieure thermische ...
Kwaliteit DELLOK YONGHUI Koudgetrokken koolstofstalen vinhoogte 16,5 mm geëxtrudeerde vinbuis fabriek

DELLOK YONGHUI Koudgetrokken koolstofstalen vinhoogte 16,5 mm geëxtrudeerde vinbuis

Koudgetrokken naadloze koolstofstaal A179 geëxtrudeerde vinbuis A213 T22, OD1'' X 54' Lengte X 10FPI X Alu 1100 Vinnen, geëxtrudeerde hoge vin koelbuis Buis Type: Naadloos (koudgetrokken) Einden: Platte einden of afgeschuinde einden. Oppervlaktebescherming: zwarte verf, roestwerende olie of vernis. ...
Kwaliteit DELLOK YONGHUI Chemische Industrie Stud SA335 P91 Naadloze buis van koolstofstaal fabriek
Video

DELLOK YONGHUI Chemische Industrie Stud SA335 P91 Naadloze buis van koolstofstaal

Chemische industrie Stud SA335 P91 Naadloos buisje van koolstofstaal SA335 P11 / P22 / P91 van BaoSteel, NPS 4' ((114.3mm) gepoetste speldverwarmingsbuizen ASTM A335/A335M: naadloze ferritische legeringstaalpijpen voor hoge temperatuur ProductgegevensMateriaal:Carbon, roestvrij staal en legeringssta...
Kwaliteit Hoge Prestaties Koper Integraal Lage Vin Buis voor Airconditioning en Warmtewisselaar Toepassingen fabriek

Hoge Prestaties Koper Integraal Lage Vin Buis voor Airconditioning en Warmtewisselaar Toepassingen

Productoverzicht DELLOK High Performance Koperen Geïntegreerde Vinnenbuis Laag-vinbuizen worden gevormd door korte vinnen direct in de buiswand te rollen, waardoor het oppervlak aanzienlijk wordt vergroot in vergelijking met een gladde buis. Omdat de vinnen integraal deel uitmaken van de buiswand, ...
Neem contact met ons op
U kunt ons te allen tijde contacteren!