X46cr13/4Cr13 Material LL Type Finned Tube for Energy Saving Steam Coils
Steam Coils Finned Tube
DELLOK LL Type Finned Tube is engineered for steam coil applications, delivering reliable heat transfer performance with enhanced corrosion protection. Manufactured by YONGHUI RADIATING PIPE MANUFACTURING CO., LTD., this finned tube combines precision winding technology with high-grade materials to meet the demands of industrial heat exchange systems.
Established in 2002 and located in Jiangsu, China, DELLOK has grown into a substantial manufacturing enterprise with 66 million yuan in fixed assets, over 200 employees, and 33 technical specialists. Our production infrastructure includes 4 aluminum processing lines with an annual capacity exceeding 20,000 tons, 5 tube-drawing lines, and 47 fin tube production lines — including an imported McElroy line from the United States — yielding an annual output capacity of over 12 million meters.
Quality is our eternal pursuit. Our production workshop operates under a meticulous, standardized management system with systematic quality assurance at every stage. Quality control at DELLOK is not limited to final inspection; it spans the entire production process. Each batch of pipes is sampled, tested, and recorded as a quality guarantee for the final product.
Manufactured similarly to the L fin type, except the base tube is knurled before wrapping the L-shaped fin strip. After wrapping, the fin foot is also knurled onto the base tube to increase bonding between tube and fin, resulting in enhanced heat transfer performance.
- Maximum operating temperature: 260 °C
- Tube material: no theoretical limit
- Fin material: aluminium or copper
Aluminium fin strip is formed into an L shape and then tension-wound onto the base tube.
- Maximum operating temperature: 150 °C
- Fin material: aluminium or copper
- Tube material: no theoretical limit
Aluminium fin strip is formed into an L shape and tension-wound onto the tube with overlapping fins, providing improved corrosion resistance over the standard L type.
- Maximum operating temperature: 180 °C
- Fin material: aluminium or copper
- Tube material: no theoretical limit
Applied fin tube is manufactured with strip wrapped under tension around the base of the tube. Fins are welded to the base tube at the strip ends, ensuring secure attachment and consistent thermal contact.
- Suitable for low-temperature applications.
- Most cost-effective finning method compared to other types.
- Failed fins can be easily removed during production, and the bare tube can be reused for finning.
- No helical groove is required on the core tube.
- Fins can be applied to very thin-walled tubes — particularly desirable when using expensive alloys as the core tube.
- Withstands temperatures up to 130 °C without risk of atmospheric corrosion or thermal stress.
- Often used as an alternative to the more expensive extruded fin type in corrosive environments.
- Maximum operating temperature: 170 °C.
- Corrosion-resistant tubes.
- Vibration resistance.
- Withstands temperatures up to 320 °C (608 °F).
- High thermal performance and stress resistance combined with protection from air corrosion — a unique combination.
- Any form of finned tube can be replaced with the KL type.
| Atmospheric Corrosion Resistance | OK |
|---|---|
| Mechanical Resistance | Poor |
| Fin Contact | Interference Fit |
| Fin-to-Tube Bond | Moderate |
| Heat Transfer Efficiency | Moderate |
- Petroleum, chemical, and petrochemical process industries
- Natural gas treatment
- Steel industry: blast furnace and converter systems
- Power generation: steam turbine exhaust condensing
- Contact condensing with cooling of circulating condensate
- Fossil and nuclear power plants
- Air conditioning (Freon, ammonia, propane)
- Incineration of household refuse
- Compressor coolers and similar heat exchange equipment
Product Categories: L/LL/KL Finned Tube
| Fin Type | L / LL / KL Finned Tube |
|---|---|
| Tube Material | Carbon steel, stainless steel, copper, aluminum |
| Fin Material | Copper, aluminum |
| Fin Tube Length | No limit |
| Working Temperature | 230 °C |
| Features | Winding process with high production efficiency, uniform fin spacing, good heat transfer, high finization ratio, and protection of the base tube from air erosion |
A finned tube is a tube with small fins around its outer surface. These fins act as a mechanism for transferring heat from the material inside the tube to or from the surrounding space. Finned tubes are used in applications where heat is transferred from a hot fluid to a cooler fluid through the tube wall. The rate of heat transfer depends on three factors:
- The temperature difference between the two fluids.
- The coefficient of heat transfer between each fluid and the wall.
- The surface area of fluid exposure.
Adopting the winding process, production efficiency is high, fin spacing is uniform, heat transfer is good, the finization ratio is high, and the base tube is protected from air erosion. The aluminum or copper fin strip is folded into an L shape and continuously spirally wound onto the outer surface of the base tube under tension.
- Maximum working temperature: 150 °C (302 °F)
- Atmospheric corrosion resistance: acceptable
- Mechanical resistance: poor
- Common fin materials: aluminum and copper
Building on the L-shaped foundation, the fin root completely covers the outer surface of the base tube. To some extent, this fin type guarantees better corrosion resistance.
- Maximum working temperature: 180 °C (356 °F)
- Atmospheric corrosion resistance: acceptable
- Mechanical resistance: poor
- Common fin materials: aluminum and copper
Before the fins are continuously wound onto the steel pipe surface, the outer surface of the base pipe undergoes a knurling process. After the fins are wound, the root of the fin attached to the steel pipe is also knurled to strengthen the bond between pipe and fins. This fin type ensures better heat transfer characteristics than L and LL types.
- Maximum working temperature: 260 °C (500 °F)
- Atmospheric corrosion resistance: acceptable
- Mechanical resistance: poor
- Common fin materials: aluminum and copper
Mainly used in air coolers in petrochemical, electric power, paper making, tobacco, and building heating industries, as well as air heaters and air heaters in spray drying systems such as vegetable protein and starch in the food industry. Additional applications include blast furnace and converter systems, power generation (condensate exhaust gas from steam turbines, condensate contact cycle cooling condensation), fossil and nuclear power plants, air conditioners (Freon, ammonia, propane), waste incineration equipment, and compressor coolers.
We customize finned tubes according to individual customer requirements. For more details about L/LL/KL finned tubes, please inquire with us.
A: Generally, samples require 1–3 days, and mass production requires 15–30 days, depending on your request.
A: We provide a one-year warranty for our products.
A: Trade assurance, TT, and Western Union.
A: Air freight, sea freight, express delivery, and other methods. We will choose the most suitable transportation method according to your requirements.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube