Stainless Steel G Type Embedded Fin Tube with Threaded Connection and Copper Tube for Heat Exchanger
Aluminum Embedded Fin Tube
,G Type Embedded Fin Tube
The DELLOK G Type Embedded Fin Tube is engineered for heat exchanger applications that demand high operating temperatures and resistance to relatively low-corrosive atmospheres. Also known as the Grooved Fin Tube, it delivers a reliable, cost-effective solution for efficient thermal transfer.
Established in 2002 and located in Jiangsu, China, DELLOK has grown into a substantial manufacturing operation with 66 million yuan in fixed assets, more than 200 employees, and 33 technical staff. Our production infrastructure includes:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from the American brand McElroy
- Annual production capacity of 12 million meters and above
Quality is our eternal pursuit. Our production workshop combines meticulous workmanship, a standardized management system, and systematic quality assurance. Quality control at DELLOK is not limited to final inspection — it spans the entire production process. Each batch of pipes is sampled and tested, with records retained as a quality guarantee for the final product.
The G Fin Tube, also known as the Embedded Fin Tube, is widely accepted where higher operating temperatures and relatively lower corrosive atmospheres are required.
The fins are manufactured by embedding the fin strip into a groove formed on the base tube. The fin is placed into the groove, and the groove is then back-filled to ensure firm adherence of the fins to the base tube. Because of this process, the product is also referred to as a G Fin Tube or Grooved Fin Tube.
The grooving, fin stack inserting, and back-filling processes are carried out simultaneously as a continuous operation. This back-filling procedure produces one of the strongest bonds available between the fin material and the base tube, ensuring optimum heat transfer.
The manufacturing tool consists of two non-cutting plates set at 90° to the axis of the base tube. The first plate creates a groove for metal spinning. The second plate directs the ribbon into the groove and sets the fin foot in place through pressure on the displaced metal. A similar plate made of tungsten carbide allows us to manufacture G finned tubes with base tubes made of austenitic steel or exotic alloys.
- High fin stability, excellent heat transfer, and high operating temperature capability
- Constant fin-to-tube wall contact due to the setting process, enabling wall temperatures of up to 450°C
- The fin is set throughout its length and consequently does not unwind even when partially uprooted
- One of the optimum choices for achieving a good effectiveness-to-cost ratio
| Product Specification | Metric | Imperial |
|---|---|---|
| Tube OD | 19~51 (mm) | 3/8"~2" |
| Tube Wall Thickness | 2.11~3.5 (mm) | 0.083"~0.138" |
| Tube Length | ≤18,500 (mm) | ≤60.7 ft |
| Fin Thickness | 0.3~0.5 (mm) | 0.012"~0.02" |
| Fin Height | 10~16 (mm) | 0.394"~0.63" |
| Fin Pitch | 100~433 FPM | 3~11 FPI |
| Fin Type | G | |
| Fin Material | Aluminum (most common grades: Alu. 1100, Alu. 1060, Alu. 6063); Copper | |
| Tube Material | C.S. (most common grades: A179, A192, SA210 GrA1/C, A106 Gr B); S.S. (most common grades: TP304, 316); Copper (most common grades: UNS12200, 14200, 70600, CuNi70/30, CuNi 90/10); Titanium (most common grade: B338Gr2) | |
| Applied Temperature | 400°C | |
| Type of Service | High temperature | |
Finned tubes are the main components of heat exchangers. They are a series of tubes with fins added on the outside to increase the contact area with the outside fluid, enabling heat exchange between the fluid inside the tube and the fluid outside the tube.
Our main markets include aerospace, oil and gas, nuclear, power generation, chemical process, and medical device industries. We are also developing products for emerging sectors such as desalination, geothermal energy, sports, and the automotive industry. We continually innovate — if you require tubing for other applications, please get in touch and we will be happy to discuss your requirements.
G Fin Tubes, or Embedded Fin Tubes, are made of two main components: the base tube and the fin strip material. We can supply G Fin Tubes in the following combinations:
- Base Tube Material: Carbon steel, alloy steel, mild steel, stainless steel, and tubes manufactured by ERW or seamless processes
- Fin Material: Aluminum, copper
We always put quality first for our customers, controlling quality from raw material inspection through production checking to water pressure testing and strength testing. Third-party inspection can also be authorized. Documentation includes:
- Incoming inspection report for bare tube and strip
- Mill test certification for bare tube
- Mill test certification for fin
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube