High Performance Copper Integral Low Fin Tube for Air Conditioning and Heat Exchanger Applications
Copper Integral Finned Tube
,DELLOK Copper Integral Finned Tube
,DELLOK Integral Finned Tube
DELLOK High Performance Copper Integral Finned Tube
Low fin tubes are formed by rolling short fins directly into the tube wall, greatly increasing the surface area compared to a smooth tube. Because the fins are integral to the tube wall, the outside diameter of the finned section does not exceed that of the pre-finned smooth tube.
Low finned tubes can be supplied with either a smooth or rifled inner surface. For certain demanding operating conditions, rifling grooves added to the inside of the tube promote turbulent flow and improve heat transfer through the tube wall.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff.
Our production capabilities include 4 aluminum processing lines with an annual processing capacity of over 20,000 tons, 5 tube-drawing lines, and 47 fin tube production lines — including one imported McElroy production line from the United States — with an annual production capacity exceeding 12 million meters.
Quality is our eternal pursuit. Our production workshop, meticulous workmanship, standardized management system, and systematic quality assurance represent DELLOK (YONGHUI)'s strongest commitment to quality. Quality control is not limited to final inspection; it extends throughout the entire production process. We implement a comprehensive quality control and assurance system, sampling and testing each batch of pipes and maintaining records as a guarantee of final product quality.
The fins are rolled out of the wall of the plain tube using a pass roller. The tube and fin consist of the same piece of material, ensuring a permanent, integral bond.
- Proven solution across a wide range of applications
- Increased heat transfer surface compared to plain tubes
- Material savings due to reduced tube length requirements
- Reduced filling quantity thanks to higher efficiency
- Manufacturing Process: Cold rolling of fins on the base tube itself
- Fin-to-Tube Bond: Not applicable — the fin is formed from the base tube itself
- Heat Transfer Efficiency: Good
- Mechanical Resistance: Good
- Corrosion Protection: Moderate
- Temperature Range: Up to a maximum of 415 °C
| Parameter | Metric | Imperial |
|---|---|---|
| Tube OD | 12.7–31.75 mm | 1/4"–1 1/4" (NPS) |
| Tube Wall Thickness | 1.65–3.0 mm | 0.065"–0.118" |
| Tube Length | ≤18,500 mm | ≤60.7 ft |
| Fin Thickness | 0.3–0.5 mm | 0.0118"–0.0197" |
| Fin Height | 0.9–1.3 mm | 0.0354"–0.0512" |
| Fin Pitch | 666–1111 FPM | 16–30 FPI |
| Fin Type | Integral Low | |
| Tube Material | Carbon Steel (C.S.), Stainless Steel (S.S.), Alloy Steel (A.S.), Copper, Titanium | |
| Applied Temperature | 415 °C | |
A: We are a manufacturing factory and can accept OEM orders. You are welcome to visit our factory and inspect our products.
A: Yes, you are welcome to place a sample order to test and check quality. Mixed samples are also acceptable.
A: Generally, samples require 1–3 days, and mass production requires 15–30 days, depending on your requirements.
A: We provide a one-year warranty for our products.
A: Trade Assurance, T/T, and Western Union.
A: Air freight, sea freight, express delivery, and other options. We will select the most suitable transportation method according to your requirements.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube