Stainless Steel Studded Tube and Studded Fin Tube with High Studded Density and Diamond Studded Type for Air Cooler
Stainless Steel Studded Tube
,Air Cooler Studded Tube
DELLOK stainless steel studded tubes are precision-engineered metal tubes with studs welded along the outer diameter in a specific pattern. Designed for air coolers, fired heaters, and water tube boilers, these tubes deliver superior heat transfer performance in the most demanding industrial environments.
Established in 2002 and located in Jiangsu, China, DELLOK has grown into a leading manufacturer of extended surface tubing. The company holds 66 million yuan in fixed assets and employs more than 200 people, including 33 technical specialists.
Our production capabilities include:
- 4 aluminum processing production lines with an annual capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from McElroy (USA)
- Annual production capacity exceeding 12 million meters
Quality is our eternal pursuit. Our meticulous production workshop, standardized management system, and systematic quality assurance represent DELLOK's commitment to excellence. Quality control is not limited to final inspection — it is integrated throughout the entire production process. Each batch of pipes is sampled, tested, and recorded as a quality guarantee for the final product.
Studded tubes are metal tubes — typically welded stainless tubes — with studs welded onto the outer diameter throughout the length in a specific pattern. They are widely used in fired heaters within refineries and in water tube boilers.
In operation, high-density crude oil passes through the studded tube (stainless steel welded tube) and is heated from the outside. The liquefied product exits from the other end, ready for further processing. Navy boilers also require studded tubes with oval-shaped studs welded on them for heating water in water tube boilers.
- Increases the surface area of the tube and protects the tube surface from direct exposure to heat and corrosive environments
- Reduces the amount of bare pipes (black welded pipe) required — the heat transfer surface of one studded pipe is equivalent to that of 4 to 10 bare pipes (weld galvanized pipe)
- Ideal for processes and applications where dirty fuels are used in harsh environments
- Heat exchange efficiency is equivalent to 2–3 times that of a bare pipe
- Easier cleaning, especially for operating cases with very dirty flue gas produced by burning heavy oil, diesel, or residual oil
- Increases the film heat transfer coefficient of flue gas to the furnace tube
- Improves efficiency in heat recovery processes and direct flame hostile atmospheres
Steel studs are automatically resistance-welded to the tube, producing high-quality forge welds. This welding process enables the combination of any grades for studs and tube — carbon steel, low alloy steel, stainless steel, and high nickel alloys. Alloy steel pipes are stress-relieved after studding according to the relevant specifications for the class and grade of steel used.
The studs are attached to the pipe in diametrically opposing pairs around the circumference by electrical resistance welding, ensuring a high-integrity bond for strength and heat flow. Stud diameter, height, and pitch can be specified on an individual basis.
Because of their relative ease of cleaning, studded tubes (also known as nail head pipes) are used in furnaces and fired heaters as an alternative to high-frequency welded finned tubes wherever the process application is such that heavy fouling of the external surface may occur.
The studs are automatically welded to the tube by an electric resistance welding machine. The welding process is controlled by a PLC program, with a stepping motor and brake motor for indexing. All welding parameters — including number of studs, pitch, and compensation coefficient — are input via a Human Machine Interface (HMI). Product quality is guaranteed by settings configured according to process requirements.
The automatic stud feeder was developed by our engineers, combining our extensive experience in manufacturing extended surface products with the most modern control technology available in the market. This technology has benefited us with more efficient production and consistent welding quality.
DELLOK studded tubes are generally installed in convection sections and boilers where the surface is exposed to severe operating conditions involving dirty flue gas. Typical applications include:
- Fired heaters in refineries and petrochemical plants
- Water tube boilers and navy boilers
- Furnaces and gas turbines
- Heat recovery processes in corrosive environments
- Processes using dirty fuels such as heavy oil, diesel, or residual oil
Studded tubes are typically manufactured with round carbon steel studs on carbon, alloy, or stainless steel tubes with diameters ranging from 1.5" to 12.75".
Studded tubes are a type of metal tube with studs welded onto the metal tube surface. These studs are arranged in a specific formation throughout the length of the tube. They are often used in boilers and refineries. Because they increase the surface area for higher heat transfer, they are used for reheating applications.
The heat exchange efficiency is equivalent to 2–3 times that of a bare pipe. Studded tubes are easier to clean, especially for operating cases with very dirty flue gas produced by burning heavy oil, diesel, or residual oil. They increase the film heat transfer coefficient of flue gas to the furnace tube and improve efficiency in heat recovery processes and direct flame hostile atmospheres. Studded tubes also reduce the amount of bare pipes used — the heat transfer surface of one studded pipe is equivalent to that of 4 to 10 bare pipes. Studded pipes are ideal for process applications where dirty fuels are used and harsh environments in terms of temperature and/or corrosion are present. Studded fin tubes are a standard frequency electric-resistance-welded studded type surface, normally manufactured with round carbon steel studs on carbon, alloy, or stainless steel tubes with diameters from 1.5" to 12.75".
The four most important process parameters that influence high frequency welding are:
- Electrical power
- Pressure applied
- Welding time
- Cooling time
Finding the optimal process parameters depends on your specific equipment, the materials involved, and the specific geometries including thickness and area to be welded. Achieving optimal results is often an experimental process guided by experience. As a guiding rule, the thicker the material and the shorter the weld times you need, the stronger the electrical power / HF generator you require.
High frequency welding (often abbreviated HF welding or RF welding) is a manufacturing process where two plastic parts are welded together using an electromagnetic field. The resulting joint can be very strong — often close to the original strength of the materials joined. In some scenarios, the weld can be even stronger than the original materials.
Using a high frequency electromagnetic field, the material is heated and pressure is added to melt and fuse the two materials together. No external heat is applied; instead, the heat is generated within the materials. During cooling (under continued pressure), the materials are fused together and a weld is created. This results in a very strong bond between the two parts.
Studded tubes are used instead of finned tubes for heat transfer in the processing industries — generally in furnaces, gas turbines, fired heaters, and furnace applications where the surface is exposed to a very corrosive environment and where very dirty gas streams require frequent or aggressive cleaning.
We always put quality as the most important priority for our customers. We control quality from raw material inspection through production checking to water pressure testing and strength testing. Third-party inspection can also be authorized. Our quality documentation includes:
- Incoming inspection report for bare tube and strip
- Mill test certification for bare tube
- Mill test certification for fin
- Mill test certification for finned tube
- Finned tube dimension and visual inspection reports
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube