Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
DELLOK U Bend Tube Seamless Alloy Steel T22 Heat Exchanger Bundle
U Tube Seamless Alloy Steel T22 Heat Exchanger Bundle
A213 T11 / T22 Seamless Alloy Steel Heat Exchanger U Bend Tube Bundle
More Standard and Grade:
ASTM A210/ASME SA210 A1
ASTM A213/ASME T11 T22
A106B/A53B/A179/A192/A200/A333/A335/500
ASME SA106B/A53B/A192/A200/A333/A335/500
BS3059 BS6323-4 BS3602-1
EN10297-1 EN10305-1 EN10216-1 EN10216-2 EN10210-1
DIN1629 DIN1630 DIN 17175 DIN2391 DIN17204 DIN2448
JIS G3452(SGP) JIS G3461JIS G3462 JIS G3454JIS G3455 JIS G3444
Company Type: | Manufacturer, Importer & Exporter | Fin Tube Type: | U Tube |
Process: | Cold Bend | Tube Material: | Carbon Steel, Stainless Steel, Alloy Steel, Copper Etc... |
Heat Treatment: | YES | Tube Length: | No Limit |
Both Ends:
Plain ends or bevel ends
Hydrostatic Test After U Bending
Maximum Test Pressure 600 Bar, Holding time: 10 Sec.
Medium: Dematerialized Water.
Compressed Air Cleaning After Hydro-Test.
Packaging
In Strong Transport-Worthy Pre-fumigated wooden boxes of corresponding dimensions for
each tube Length, Radius, Diameter, According To PO requirements as well as wrapped In polyethylene
films With soft plastic caps on both end of Tube.
Competitive Advantage:
1. We have more than 10,000 square meters workshop, including 10 finning machines, daily extrusion capacity up to 3,000 meters.
2. The finning machines of Integral Low Fin Tubes are designed and assembled by ourselves and we can offer you finning machines and all accessories etc...
3. The Integral Low Fins are rolled out of the tube surface to increase the tubes external surface area, without affecting any others dimension.
4. Low Fins are very useful for tight condensers and exhibits high efficiency of heat transfer.
5. Economical solutions of heat exchange problems of media with different heat conduction abilities or different current condition
6. High chemical-, thermal- and mechanical resistance, suitable for rough operation conditions.
Our Service | |
1 | Inquiry-Professional quotation, or send inquiry item more details, we start contact more details |
2 | Confirm the price, lead time, payment term etc |
3 | Our sales send the Proforma Invoice with our seal, or you order online to us |
4 | Customer make the payment for deposit and send us Bank receipt |
5 | Intial Production Stage-Inform the clients that we habe got the payment, and will make the samples according to your request, send you photos or samples to get your approval. After approval, we inform that we will arrange the production & inform the estimated time |
6 | Middle Production-send photos to show the production line which you can see you products. Confirm the estimated delivery time again. |
7 | End Production-Mass production products photos and samples will send to you for approval. You can also arrange the third party inspection |
8 | Clients make payment for balance and ship goods, inform the tracking number and check the status for clients |
9 | Order can be say "finish" when you receive the goods and satify with them |
10 | Feedback to our about Quality, Service, Market Feedback & Suggestion. And we can do better |
DELLOK TP304L Longitudinal Finned Tube
DELLOK Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube
