SA179 Bimetallic Corrosion Resistant Extruded Finned Tube for Heat Exchanger Applications
Aluminium Extruded Fin Tube
,Finned Aluminum Extrusion Tube
DELLOK SA179 Extruded Finned Tube is a bi-metallic, integrally finned tube engineered for high-efficiency heat transfer and long service life in demanding industrial environments. The fin is formed by extruding the outer aluminium sleeve into a helical profile, creating a continuous, metallurgically bonded fin with no contact resistance.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After many years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff.
Our production infrastructure includes 4 aluminium processing lines with an annual capacity exceeding 20,000 tons, 5 tube-drawing lines, 47 fin-tube production lines, and 1 imported production line from the American brand McElroy. Total annual fin-tube production capacity exceeds 12 million meters.
Quality is our eternal pursuit. Meticulous workmanship, a standardized management system, and systematic quality assurance form Dellok (YONGHUI)'s commitment to quality. Quality control is not limited to final inspection — it spans the entire production process. Each batch of pipes is sampled, tested, and recorded as a quality guarantee for the final product.
This fin type is formed from a bi-metallic tube consisting of an aluminium outer tube and an inner tube of almost any material. The fin is created by rolling material from the outside of the exterior tube, producing an integral fin with excellent heat transfer properties and longevity. Extruded fins offer excellent corrosion protection for the base tube. The maximum operating temperature for this fin type is 280°C.
| Fin Material | Aluminium, Copper |
|---|---|
| Tube Materials | No theoretical limits |
| Fin Type | Extruded Fin Tube |
| Tube Material Options | Copper, copper-nickel, stainless steel, titanium, carbon steel, etc. |
| Maximum Operating Temperature | 280°C (standard); up to 325°C in selected applications |
A carefully degreased core tube is fitted into an aluminium primary tube. This assembly is then fed into the triple-spindle finning head of the fin-extruding machine. Three special multi-disc packs extrude the aluminium tube into helical high fins while reducing the inner diameter to give firm pressure contact with the core tube.
- Fin materials: Aluminium
- Base tube materials: Any metallic material
- 100% fin-to-tube bond providing exceptional efficiency and longevity.
- Excellent corrosion protection on the base tube.
- Easy to clean with a high-pressure water jet without deforming the fins.
- Continuous outer sleeve eliminates galvanic corrosion between the tube and fins.
- Bonding of the outer and inner tubes removes the risk of contact loss with the aluminium due to thermal stress; fins are vibration resistant.
- Higher heat transfer performance for the life of the unit.
- Commonly used in applications with temperatures up to 325°C.
The extruded fin is formed from an outer aluminium tube with a large wall thickness (muff), aligned over an inner base tube. The two tubes are pushed through three arbors with rotating discs that squeeze or extrude the aluminium fins up and out of the muff material in a spiral shape in a single operation.
The resultant fin typically has a base (root) thickness of 0.035", an average fin thickness of 0.016", and a tip thickness of 0.009", with an overall height of 16 mm (5/8"). The root thickness forms an uninterrupted bond over the entire tube length.
Murphy disc technology now makes it possible to fin a thinner muff, offering significant material savings. The recommended standard muff wall is 0.176" versus the industry practice of 0.183"–0.210". In addition, the same growth factor can be used for pitches from 8 to 11 FPI, allowing standardization on one muff thickness and eliminating the need to stock multiple muff wall thicknesses. The same discs can produce 5/8" (15.9 mm) or 1/2" (12.7 mm) high fins.
Model B produces a 5/8" high fin on tube sizes from 25 mm to 1.5" (38.1 mm). The Model B Extruded Finning Machine is now capable of 7/16" high integral copper fin at 7 to 10 FPI within the machine's tube size range (25 mm to 1.5"). Each machine is configured for the specific production requirements of the end user.
- Petroleum, chemical, and petrochemical industries
- Natural gas treatment
- Steel industry: blast furnace and converter cooling systems
- Power generation: steam turbine exhaust condensing
- Contact condensing with cooling of circulating condensate
- Fossil and nuclear power plants
- Air conditioning (freon, ammonia, propane)
- Incineration of household refuse
- Compressor coolers, etc.
Product category: Extruded Finned Tube.
| Fin Type | Extruded Fin Tube |
|---|---|
| Tube Material | Copper, copper-nickel, stainless steel, titanium, etc. |
| Fin Material | Copper, aluminium |
Aluminium extruded finned tubes use a base tube covered with an aluminium tube (the base tube may be carbon steel, stainless steel, or copper) that is machine-extruded to form a tube fin. The fin base and the tube outer wall are closely fitted, giving the finned tube a high heat transfer coefficient and excellent heat transfer performance.
Also called "integral finned tubes," aluminium extruded finned tubes can be made from iron, copper, or aluminium tube by compound rolling. They offer tight bonding, low thermal resistance, good heat transfer performance, high strength, low flow loss, strong anti-corrosion performance, resistance to deformation under long-term hot and cold working conditions, and a long working life.
Process flow: pipe line → compressing or rolling → strip peeling → washing → pressure test → blast blowing → packaging.
The extruded fin tube is formed from a bi-metallic tube consisting of an aluminium outer tube and an inner tube of almost any material. The fin is formed by rolling material from the outside of the outer tube to provide an integrated fin with excellent heat transfer performance and service life. The extruded fins provide excellent corrosion protection for the base tube.
The composite finned tube is produced primarily by the extrusion method: the bi-metallic composite tube is lined with a mandrel and driven by the rotation of the roller blade. The composite tube is processed on its outer surface through the cavity formed by the rolling groove and the core head to produce the fins. The heat transfer tube produced by this method is an organic whole with its outer tube and fins, so there is no contact heat loss, resulting in good performance and high heat transfer efficiency.
A: Generally, samples require 1–3 days; mass production requires 15–30 days, depending on your request.
A: We provide a one-year warranty for our products.
A: Trade assurance, T/T, and Western Union.
A: Air freight, sea freight, express delivery, and other options. We will choose the most suitable transportation method according to your requirements.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube