DELLOK ASTM Carbon Steel U Shaped Longitudinal Finned Tube

^{DELLOK ASTM Carbon Steel U-Shaped Longitudinal Finned Tube}

^{About Us}

^{DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO.,LTD.) was established in 2002, which is located in Jiangsu, China. After many years of development, the company now has 66 million yuan in fixed assets, more than 200 employees, and 33 technical staffs. We have 4 aluminum processing production lines, with the annual processing capacity of more than 20,000 tons; And we have 5 tube-drawing production lines; 47 fintube production lines, 1 imported production line from American with the brand of McElroy , with the annual production capacity of 12 million meters the above. Quality is the theme of eternal pursuit of winner -Production workshop- Meticulous works, standardized management system and systematic quality assurance are Dellok(YONGHUI)'s best commitment to quality. In Dellok(YONGHUI), the quality control is not only the detection of the final process, but throughout the entire production process. We implement a set of quality control and assurance systems. Each batch of pipes is sampled and tested, and records are kept as a quality guarantee for the final product.}

^{Longitudinal Finned Tube:}

^{The finned tube are particularly efficient as the channels are welded on the external surface of the tube by means of resistance weld technique. Every channel is the result of a fin strip shaped into a U-form, such that each leg of the U will form a fin. The number of fins will be always a multiple of four with a maximum number depending on the outside diameter of the tube and on the thermodynamic calculations promoted for a specific job.}

^{Third Part Inspection is acceptable.}

^{Advantages of Longitudinal Finned Tube:}

^{1,The heat transfer area is 8 to 12 times of the bare tube.
2,More effective than bare tubes.
3,As the heat transfer area increases, a smaller size exchanger is required.
4,More economical options.
5,The fins can be cut or twisted to increase fluid turbulence on the shell side and improve heat transfer.}

^{Product Parameters of Longitudinal Finned Tube:}

^{Technical Product Sheet:
1,Tube/Pipe size
16 mm to 273 mm (10”) and more on request
2,Tube/Pipe Material
Carbon Steel (A106, A333, A179, A210, P5, P11, P22) + Stainless Steel (304, 316, Duplex, Super Duplex) + Copper and Copper Alloys (Brass, Aluminum Brass, Cupronickel 70/30-90/10) + Nickel Alloys ( Monel 400, Inconel 625)
3,Fin Material
Carbon Steel (A106,A333,A179,A210, P5, P11, P22) + Stainless Steel (304,316,Duplex,Super Duplex) + Copper and Copper Alloys (Brass, Aluminum Brass, Cupronickel 70/30-90/10) + Nickel Alloys ( Monel 400, Inconel 625)
4,Fin Height
4,0 mm to 38 mm
5,Fin Thickness
0,8 to 1,5 mm
6,Number of Fins
Depending on the tube OD}