ASTM A106 Solid Stainless Steel Helical Welded Fin Tube for High Frequency Welded Fin Tube Heat Recovery
A106 Welded Fin Tubes
,EN10204 Stainless Steel Welded Pipe
,26mm Welded Fin Tubes
Solid Stainless Steel Helical ASTM A106 Welded Fin Tubes
A106 Gr.B seamless carbon steel tube with helical welded solid-type fin tubes, manufactured to ASTM A106/A106M for high-temperature service.
High Frequency Resistance Welded Helical Steel Fin Tubes are widely used in the recovery of waste heat from boiler flue gas. The fin strip is welded continuously and spirally wound onto a polished bare tube, with the tube and fins bonded together using high frequency resistance welding technology. All units are finished with an outside red oxide zinc phosphate primer and an inside volatile corrosion inhibitor (VCI) in water-soluble tablet form.
These fin tubes are widely applied in fired heaters, heat exchangers, boilers, economizers, pre-heaters, coolers, heat pipes, and heaters. We produce both solid plain and serrated helical welded steel finned tubes. All spiral welded tubes can be bent in the middle or at the end of the finned section to form what are known as hairpin tubes.
Compliance is assessed against the International Standard for Dimensions, Tolerances, and Tests of High Frequency Resistance Welded Fins, or the delivery conditions (TDC) specified by the client.
- Un-welded sections of fin
- Fin damage after finning
- Copper pollution
- Tears and wrap defects
- Fin height
- Fin spacing
- Fin inclination
- Fin corrugation
- Length of finned and un-finned portions
- Ovality
- Thickness reduction
- Area reduction
Outside: red oxide zinc phosphate primer. Inside: volatile corrosion inhibitor (VCI) in water-soluble tablet form.
- Bevel angle: 30°–35°
- Bevel root size: 0.5 mm – 1.5 mm
| Material | Carbon steel, alloy steel, heat resistant steel, stainless steel, etc. |
| Tube Details |
Tube OD: 19 mm min. Tube Length: 18 meters max. Fin Height: 26 mm max. Fin Thickness: 0.8 mm min. Fin Pitch: min. 4 mm for solid fins & 3.3 mm for serrated fins. |
| Production Capacity | Daily production capacity up to 40 tons. |
| HFW Fin Type | Solid plain and serrated. |
- More than 10,000 square meters of workshop space, including 4 ERW high frequency welding finning lines, with a daily production capacity of around 40 tons.
- Comprehensive quality assurance plan for high frequency welding spiral steel tubes:
- Raw material control for both plain tubes and fins.
- In-process control with reports including WPS, PQR & WPQ; weld deposition efficiency testing before fabrication; non-destructive testing and tensile testing.
- Final inspection control with reports covering visual and dimensional checks.
- The high frequency resistance welded fin tube is integrally extended for maximum surface area to achieve high efficiency. The heat transfer ratio of high frequency welded fin tube is approximately 8–9 times higher than that of plain tubes.
- This welded helical fin tube is a singular integral unit, eliminating heat contact resistance and losses. Tube-side temperatures generally reach up to 800°C for stainless steel fins; low carbon steels, withstanding up to 475°C, are the most common choice.
| 1 | Inquiry — professional quotation provided, or send us more details on your inquiry item and we will begin discussing the specifics. |
| 2 | Confirm the price, lead time, payment terms, and other details. |
| 3 | Our sales team sends the Proforma Invoice with our seal, or you may place your order online. |
| 4 | Customer makes the deposit payment and sends us the bank receipt. |
| 5 | Initial Production Stage — we inform the client that payment has been received and will prepare samples according to your request, sending photos or samples for your approval. After approval, we arrange production and inform you of the estimated time. |
| 6 | Middle Production — we send photos showing the production line so you can see your products, and confirm the estimated delivery time again. |
| 7 | End Production — mass production product photos and samples are sent to you for approval. You may also arrange third-party inspection. |
| 8 | Client makes the balance payment and ships the goods; we inform you of the tracking number and check the status for you. |
| 9 | The order can be considered "finished" once you receive the goods and are satisfied with them. |
| 10 | Provide feedback on quality, service, market feedback, and suggestions so we can continue to improve. |
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube