logo

SA214 Stainless Steel Bent Evaporator OD 19mm Welded Fin Tube and Helical Fin Tube for Heat Recovery

Place of Origin:China
Brand Name:DELLOK
Certification:CE. ISO,EN10204. 3.1 Cert.
Model Number:HFW
Minimum Order Quantity:N/A Contact us for details
Price:N/A Contact us for details
Payment Terms:L/C, T/T Contact us for details
Supply Ability:60000 meters month
Product Details
Highlight:

OD 19mm Welded Fin Tubes

,

19mm Stainless Steel Welded Tubing

,

SMLS Welded Fin Tubes

Tube OD:: 19mm Min.
Tube Length: 18 Meters Max.
HFW Fin Type: Solid Plain And Serrated.
Fin Height:: 26mm Max.
Fin Thickness:: 0.8mm Min
Fin Pitch:: Min. 4 Mm For Solid Fins & 3.3mm For Serrated Fins.
Product Description
Product Overview

DELLOK SA214 Stainless Steel Bent Evaporator OD 19mm Welded Fin Tubes are high frequency resistance welded helical fin tubes engineered for efficient heat recovery and thermal transfer. The fin strip is continuously and spirally welded onto a polished bare tube, bonding tube and fins together through high frequency resistance welding. Each unit is finished with an external red oxide zinc phosphate primer and an internal volatile corrosion inhibitor (VCI) in water-soluble tablet form.

These tubes are widely applied in fired heaters, heat exchangers, boilers, economizers, pre-heaters, coolers, heat pipes, and heaters. Both solid plain and serrated helical welded finned tubes are produced, and all spiral welded tubes can be bent in the middle or at the end to form hairpin tubes.

Product Details
Material Carbon Steel, Alloy Steel, Heat Resistant Steel, Stainless Steel, etc.
Tube OD 19 mm min.
Tube Length 18 meters max.
Fin Height 26 mm max.
Fin Thickness 0.8 mm min.
Fin Pitch Min. 4 mm for solid fins & 3.3 mm for serrated fins
Production Capacity Daily production capacity up to 40 tons
HFW Fin Type Solid plain and serrated

P235 GH TC1/2 SMLS Carbon Steel Tube, Welded Helical Bent Evaporator Fin Tube.

Quality Inspection
Visual Check
  • Un-welded parts of fin
  • Fin damage after fining
  • Copper pollution
  • Tears and wrap defects
Dimensional Check
  • Fin height
  • Fin spacing
  • Fin inclination
  • Fin corrugation
  • Length of finned and un-finned portion
Bending Check
  • Ovality
  • Thickness and area reduction
Acceptance Criteria

Compliance is measured against the International Standard for Dimensions, Tolerances, and Tests of High Frequency Resistance Welded Fins, or the delivery conditions (TDC) specified by the client.

Tube End Finish & Delivery Condition
Bevel 30° ~ 35°
Bevel Root Size 0.5 mm ~ 1.5 mm
Delivery Condition Tube ends are square cut, free of burrs, internally dried and air blown clean, and externally coated with varnish at both ends of the helical welded tubes.
Documentation

Documentation includes QAP, WPS, PQR & WPQ, raw materials mill certificates, inspection and test sample results, and the manufacturer's warranty certificate.

Material Specifications

A wide range of fin and tube material combinations is available.

Items General Materials Popular ASTM Materials
Core Tube Material Carbon Steel, Alloy Steel, Heat Resistant Steel, Stainless Steel, etc. 10#, 20#, 15CrMo, Cr5Mo, Cr9Mo, 1Cr18Ni9Ti, 0Cr18Ni9, 00Cr17Ni14Mo2, SA106B, SA106C, SA192, SA179, SA178, SA214, SA210-A1, SA210-C, TP304/304L/304H, TP409/410, TP316/316L, TP321/321L, TP347H, T11, T22, T91, etc.
Fins Material Carbon Steel, Alloy Steel, Heat Resistant Steel, Stainless Steel, etc. Q235-BF, 08F, 08AL, 1Cr18Ni9Ti, 0Cr13, 1Cr13, 0Cr18Ni9, 09CrCuSb, CS, A1008-B, SPHC, SPCC, TP304/304L, TP316/316L, TP321/321L, etc.
Our Service Process
1 Inquiry — professional quotation, or send inquiry item with more details so we can start discussing further.
2 Confirm the price, lead time, payment term, etc.
3 Our sales team sends the Proforma Invoice with our seal, or you order online with us.
4 Customer makes the deposit payment and sends us the bank receipt.
5 Initial Production Stage — we inform clients that payment has been received and will make samples according to your request, sending photos or samples for your approval. After approval, we arrange production and inform the estimated time.
6 Middle Production — we send photos showing the production line so you can see your products, and confirm the estimated delivery time again.
7 End Production — mass production product photos and samples are sent to you for approval. You may also arrange third-party inspection.
8 Client makes the balance payment and ships the goods; we inform the tracking number and check the status for clients.
9 The order is considered "finished" when you receive the goods and are satisfied with them.
10 Feedback to us about quality, service, market feedback & suggestions — so we can do better.
Product Gallery
You May Also Like
Quality TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers factory

TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers

TP304L Longitudinal Finned Tube The TP304L Longitudinal Finned Tube is a high-performance heat transfer component designed for demanding industrial applications. Manufactured with precision resistance welding, longitudinal fins are securely bonded to the core plain tube, delivering superior thermal ...
Quality DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube factory

DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube

Cold Drawn Seamless Carbon Steel A179 Extruded Fin Tube A213 T22 , OD1' X 54' Length X 10FPI X Alu 1100 Fins , extruded high fin cooling tube Tube Type:Seamless (Cold Drawn) Ends:Plain ends or bevel ends. Surface protection:black painting,anti-rust oil or varnish. Introduction: A smooth core tube is ...
Quality DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube factory
video

DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube

Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube SA335 P11 / P22 / P91 from BaoSteel , NPS 4'(114.3mm) studded pin heating tubes ASTM A335/A335M: Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service Product Details Material: Carbon, stainless, and alloy steels. Tube details: ...
Quality High Performance Copper Integral Low Fin Tube for Air Conditioning and Heat Exchanger Applications factory

High Performance Copper Integral Low Fin Tube for Air Conditioning and Heat Exchanger Applications

Product Overview DELLOK High Performance Copper Integral Finned Tube Low fin tubes are formed by rolling short fins directly into the tube wall, greatly increasing the surface area compared to a smooth tube. Because the fins are integral to the tube wall, the outside diameter of the finned section ...
Contact Us
you can contact us at anytime!