32mm Serrated Solid Plain Helical Welded Stainless Steel Fin Tube for High Frequency Heat Exchanger
TP316 Stainless Steel Welded Tubes
,0.8mm Stainless Steel Welded Pipes
,TP316 Serrated Finned Tube
Helical Solid Serrated 32mm Stainless Steel Welded Tubes
A106 Gr.B SMLS carbon steel tube with helical welded solid-type fin tubes, manufactured to ASTM A106/A106M — the standard specification for seamless carbon steel pipe for high-temperature service.
| Item | General Materials | Popular ASTM Materials |
|---|---|---|
| Core Tube Material | Carbon steel, alloy steel, heat-resistant steel, stainless steel, etc. | 10#, 20#, 15CrMo, Cr5Mo, Cr9Mo, 1Cr18Ni9Ti, 0Cr18Ni9, 00Cr17Ni14Mo2, SA106B, SA106C, SA192, SA179, SA178, SA214, SA210-A1, SA210-C, TP304/304L/304H, TP409/410, TP316/316L, TP321/321L, TP347H, T11, T22, T91, etc. |
| Fins Material | Carbon steel, alloy steel, heat-resistant steel, stainless steel, etc. | Q235-BF, 08F, 08AL, 1Cr18Ni9Ti, 0Cr13, 1Cr13, 0Cr18Ni9, 09CrCuSb, CS, A1008-B, SPHC, SPCC, TP304/304L, TP316/316L, TP321/321L, etc. |
The fin strip is welded continuously and spirally wound onto a polished bare tube. The tube and fins are bonded together using high-frequency resistance welding technology.
We produce both solid plain and serrated helical welded steel finned tubes. All spiral welded tubes can be bent in the middle or at the end of the fin tubes — these are referred to as hairpin tubes.
Compliance follows the International Standard for Dimensions, Tolerances, and Tests of High Frequency Resistance Welded Fins, or the delivery conditions (TDC) specified by the client.
- Un-welded sections of fin
- Fin damage after fining
- Copper pollution
- Tears and wrap defects
- Fin height
- Fin spacing
- Fin inclination
- Fin corrugation
- Length of finned and un-finned portions
- Ovality
- Thickness reduction
- Area reduction
- Surface coating: Outside — red oxide zinc phosphate primer; inside — volatile corrosion inhibitor (VCI) in water-soluble tablet form.
- Tube end finish: Bevel at 30°–35°.
- Bevel root size: 0.5 mm – 1.5 mm.
- Delivery condition: Tube ends are square cut, free of burrs, internally dried and air-blown clean, and externally coated with varnish at both ends of the helical welded tubes.
Documentation includes QAP, WPS, PQR & WPQ, raw material mill certificates, inspection and test sample results, and the manufacturer's warranty certificate.
High Frequency Resistance Welded Helical Fin Tubes are widely applied in fired heaters, heat exchangers, boilers, economizers, pre-heaters, coolers, heat pipes, and heaters.
| Material | Carbon steel, alloy steel, heat-resistant steel, stainless steel, etc. |
|---|---|
| Tube Details |
Tube OD: 19 mm min. Tube Length: 18 meters max. Fin Height: 32 mm max. Fin Thickness: 0.8 mm min. Fin Pitch: min. 4 mm for solid fins & 3.3 mm for serrated fins. |
| Production Capacity | Daily production capacity up to 40 tons. |
| HFW Fin Type | Solid plain and serrated. |
A wide range of fin and tube material combinations is available.
| Parameter | Solid Fins (mm) | Serrated Fins (mm) | ||
|---|---|---|---|---|
| Min | Max | Min | Max | |
| Tube OD (mm) | 19 | 219 | 19 | 219 |
| Fin Height (mm) | 8 | 26 | 8 | 32 |
| Fin Thickness (mm) | 0.8 | 2.8 | 1 | 1.6 |
| Fin Density (mm) | 4 (250 FPM) | 20 | 3.3 (303 FPM) | 20 |
| Tube Length (mm) | N/A | 18000 | N/A | 18000 |
- Tube swaging process for joining two tubes.
- Spacer rings (material: steel) available.
- One side with solid plain fins and the other with serrated fins — two fin types on the same tube.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube