0.8mm Fin Thickness Helical Welded Fin Tube for HRSG Boiler and Fired Heater Applications
Serrated 0.8mm Welded Fin Tubes
,0.8mm Helical Finned Tube
,32mm Welded Fin Tubes
SA192 carbon steel tube with welded helical steel fin, engineered for HRSG boiler applications. Designed for seamless carbon steel boiler tubes in high-pressure service.
High Frequency Resistance Welded Helical Steel Fin Tubes are widely used in the recovery of waste heat from boiler flue gas. The fin strip is welded continuously and spirally wound onto a polished bare tube, with the tube and fins bonded together using high frequency resistance welding technology.
All tubes are finished with an outside red oxide zinc phosphate primer and an inside volatile corrosion inhibitor (VCI) in water-soluble tablet form. The product suits a wide range of applications, including fired heaters, heat exchangers, boilers, economizers, pre-heaters, coolers, heat pipes, and heaters.
We produce both solid plain and serrated helical welded steel finned tubes. All spiral welded tubes can be bent in the middle or at the end of the finned section to form what are known as hairpin tubes.
- High frequency welding machine output power supply: 200KW or 300KW.
- Quality is assured through hydrostatic or pneumatic tests and tensile tests to verify the mechanical bonding between the bare tube and fin materials.
- Acceptance criteria: International Standard for Dimensions, Tolerances, and Tests of High Frequency Resistance Welded Fins, or the client's delivery conditions (TDC).
- Visual check: un-welded fin sections, fin damage after fining, copper pollution, tears, wrap, and similar defects.
- Dimensional check: fin height, fin spacing, fin inclination, fin corrugation, and the length of finned and un-finned portions.
- Bending check: ovality, thickness, and area reduction.
- Coating: outside red oxide zinc phosphate primer and inside volatile corrosion inhibitor (VCI) in water-soluble tablet form.
- Fin end finish: bevel (30–35 degrees).
- Delivery condition: tube ends are square cut, free of burrs, internally dried and air blown clean, and externally coated with varnish at both ends of the helical welded tubes. Desiccants are placed in each package for continental transportation.
- Documentation includes QAP, WPS, PQR & WPQ, raw material mill certificates, inspection and test sample results, and the manufacturer's warranty certificate.
| Condition | New | Brand Name | YONGHUI |
|---|---|---|---|
| Place of Origin | China | Material | Carbon, stainless, and alloy steels |
| Fin Height | 32 mm max. | Fin Thickness | 0.8 mm min. |
| Fin Pitch | Min. 4 mm for solid fins & 3.3 mm for serrated fins | Tube Length | 18 meters max. |
| Tube OD | 19 mm min. | Production Capacity | Daily production capacity up to 40 tons |
| Packing | Steel frame with plywood or seaworthy wooden box | Marketing Type | New Production 2020 |
| Warranty | 1 Year | After Warranty Service | Online support |
| Machinery Test Report | Provided | Certification | CE, ISO, EN10204 3.1 Cert. |
| After-sales Services | Video technical support, online support | Showroom Location | None |
| Local Service Location | None |
- More than 10,000 square meters of workshop, including 4 ERW high frequency welding finning lines, with a daily production capacity of around 40 tons.
- Comprehensive quality assurance plan for high frequency welding spiral steel tubes:
- Raw material control for both plain tubes and fins.
- In-process control with reports including WPS, PQR & WPQ, weld deposition efficiency tests before fabrication, non-destructive tests, and tensile tests.
- Final inspection control with reports covering visual and dimensional checks.
- The high frequency resistance welded fin tube is integrally extended for maximum surface area to achieve high efficiency. Its heat transfer ratio is approximately 8–9 times higher than that of plain tubes.
- This welded helical fin tube is a singular integral unit, eliminating heat contact resistance and losses. Tube-side temperatures generally reach up to 800 degrees with stainless steel fins; low carbon steels, withstanding up to 475 degrees, are the most common choice.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube