32mm Helical Fin Tube
,3.3mm Serrated Serrated Fin Tube
,0.8mm Welded Tube
SA213-TP304H | NPS 2" × SCH80S | Continuous Helical Welded Heat Exchanger Fin Pipe
High Frequency Resistance Welded (HFRW) helical steel fin tubes are widely used in the recovery of waste heat from boiler flue gas. The fin strip is welded continuously and spirally wound onto a polished bare tube, bonding the tube and fins together through high frequency resistance welding technology.
We produce both solid plain and serrated helical welded steel finned tubes. All spiral welded tubes can be bent in the middle or at the end of the finned section to form what are known as hairpin tubes.
| General HF Welding Production Capacity | General Specifications of HF Welding Fin Tubes |
|---|---|
| Welding Facility: 4 finning machines Daily production capacity: up to 40 tons HFW fin type: solid plain and serrated | Tube OD: 19 mm min. Tube Length: 18 meters max. Fin Height: 32 mm max. Fin Thickness: 0.8 mm min. Fin Pitch: min. 4 mm for solid fins and 3.3 mm for serrated fins |
- High frequency welding machine output power supply: 200 KW or 300 KW.
- Quality is assured by hydrostatic or pneumatic tests and tensile tests to verify the mechanical bonding between the bare tube and fin materials.
- Acceptance criteria: International Standard for Dimensions, Tolerances, and Tests of High Frequency Resistance Welded Fins, or the client's delivery conditions (TDC).
- Visual check: un-welded parts of fin, fin damage after finning, copper pollution, tears, wrap, and similar defects.
- Dimensional check: fin height, fin spacing, fin inclination, fin corrugation, and the length of finned and un-finned portions.
- Bending check: ovality, thickness, and area reduction.
- Coating: outside — red oxide zinc phosphate primer; inside — volatile corrosion inhibitor (VCI) in water-soluble tablet form.
- Fin end finish: bevel (30–35 degrees).
- Delivery condition: tube ends are square cut, free of burrs, internally dried and air blown clean, and externally coated with varnish at both ends of the helical welded tubes. Desiccants are placed in each package for continental transportation.
- Documentation includes QAP, WPS, PQR & WPQ, raw material mill certificates, inspection and test sample results, and the manufacturer's warranty certificate.
High Frequency Resistance Welded Helical Fin Tubes are widely applied in fired heaters, heat exchangers, boilers, economizers, pre-heaters, coolers, heat pipes, heaters, and similar thermal equipment.
A wide range of fin and tube material combinations is available.
| Items | General Materials | Popular Materials |
|---|---|---|
| Core Tube Material | Carbon Steel, Alloy Steel, Heat Resistant Steel, Stainless Steel, etc. | 1. Carbon Steel: A179 / A192 / SA210 / P235GH, etc. 2. Stainless Steel: TP304 / 304L, TP316 / 316L, A789 S31803 / S2205, etc. 3. Alloy Steel: T11 / T13 |
| Fins Material | Carbon Steel, Alloy Steel, Heat Resistant Steel, Stainless Steel, etc. | 1. Carbon Steel: SPCC 2. Stainless Steel 3. Alloy Steel |
| Helical Steel Fin Tubes Fabrication Range | Solid Fins (mm) | Serrated Fins (mm) | ||
|---|---|---|---|---|
| Min | Max | Min | Max | |
| Tube OD (mm) | 19 | 219 | 19 | 219 |
| Fin Height (mm) | 8 | 26 | 8 | 32 |
| Fin Thickness (mm) | 0.8 | 2.8 | 1 | 1.6 |
| Fin Density (mm) | 4 (250 FPM) | 20 | 3.3 (303 FPM) | 20 |
| Tube Length (mm) | N/A | 18000 | N/A | 18000 |
- Tube swaging process for the joint of two tubes.
- Spacer rings (material: steel) are available.
- One side with solid plain fins and the other with serrated fins — two fin types on the same tube.
- Inquiry: Professional quotation provided, or send us more details on the inquiry item so we can begin discussing specifics.
- Confirmation: Confirm the price, lead time, payment terms, and other details.
- Proforma Invoice: Our sales team sends the Proforma Invoice with our seal, or you may place your order online.
- Deposit: The customer makes the deposit payment and sends us the bank receipt.
- Initial Production Stage: We inform the client that payment has been received and prepare samples per your request, sending photos or samples for your approval. After approval, we arrange production and inform you of the estimated time.
- Middle Production: We send photos showing the production line so you can see your products, and reconfirm the estimated delivery time.
- End Production: Mass production product photos and samples are sent for your approval. You may also arrange a third-party inspection.
- Balance & Shipping: The client makes the balance payment and ships the goods; we provide the tracking number and check the status on your behalf.
- Order Completion: The order is considered "finished" once you receive the goods and are satisfied with them.
- Feedback: Share your feedback on quality, service, market response, and suggestions so we can continue to improve.



TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube