T11 Alloy Welded Fin Tubes
,32mm High Frequency Welded Pipe
,19mm Weldable Steel Pipe
High Frequency Resistance Welded Helical Steel Fin Tubes are engineered for efficient waste heat recovery from boiler flue gas. The fin strip is continuously and spirally welded onto a polished bare tube, bonding tube and fins together through high frequency resistance welding. Both solid plain and serrated helical welded finned tubes are produced, and all spiral welded tubes can be bent at the middle or end to form hairpin tubes.
These tubes are widely applied in fired heaters, heat exchangers, boilers, economizers, pre-heaters, coolers, heat pipes, and heaters.
| Material | Carbon Steel, Alloy Steel, Heat Resistant Steel, Stainless Steel, etc. |
|---|---|
| Tube Details | Tube OD: 19 mm min. Tube Length: 18 meters max. Fin Height: 32 mm max. Fin Thickness: 0.8 mm min. Fin Pitch: min. 4 mm for solid fins & 3.3 mm for serrated fins. |
| Production Capacity | Daily production capacity up to 40 tons. |
| HFW Fin Type | Solid plain and serrated. |
SA213 T11 Alloy Steel tube + SS409 fins high frequency resistance welded heating tube.
The fin strip is welded continuously and spirally wound onto a polished bare tube. The tube and fins are bonded together using high frequency resistance welding technology. Both solid plain and serrated helical welded steel finned tubes are produced, and all spiral welded tubes can be bent in the middle or at the end of the fin tubes to form hairpin tubes.
- High frequency welding machine output power supply: 200 KW or 300 KW.
- Quality is assured by hydrostatic or pneumatic tests and tensile tests to verify the mechanical bonding between bare tube and fin materials.
- Acceptance criteria: International Standard for Dimensions, Tolerances, and Tests of High Frequency Resistance Welded Fins, or the delivery conditions (TDC) of clients.
- Visual check: un-welded parts of fin, fin damage after fining, copper pollution, tears, wrap, etc.
- Dimensional check: fin height, fin spacing, fin inclination, fin corrugation, length of finned and un-finned portions, etc.
- Bending check: ovality, thickness, and area reduction.
- Coating: outside red oxide zinc phosphate primer and inside volatile corrosion inhibitor (VCI) in water-soluble tablet form.
- Fin end finish: bevel (30–35 degrees).
- Delivery condition: tube ends are square cut, free of burrs, internally dried and air blown clean, externally coated with varnish at both ends of helical welded tubes. Desiccants are placed in each package for continental transportation.
- Documentation shall include QAP, WPS, PQR & WPQ, raw material mill certificates, inspection and test sample results, and the manufacturer's warranty certificate.
A wide range of fin and tube material combinations is available.
| Items | General Materials | Popular ASTM Materials |
|---|---|---|
| Core Tube Material | Carbon Steel, Alloy Steel, Heat Resistant Steel, Stainless Steel, etc. | 10#, 20#, 15CrMo, Cr5Mo, Cr9Mo, 1Cr18Ni9Ti, 0Cr18Ni9, 00Cr17Ni14Mo2, SA106B, SA106C, SA192, SA179, SA213 T11 Alloy, SA178, SA214, SA210-A1, SA210-C, TP304/304L/304H, TP409/410, TP316/316L, TP321/321L, TP347H, T11, T22, T91, etc. |
| Fins Material | Carbon Steel, Alloy Steel, Heat Resistant Steel, Stainless Steel, etc. | Q235-BF, 08F, 08AL, 1Cr18Ni9Ti, 0Cr13, 1Cr13, 0Cr18Ni9, 09CrCuSb, CS, A1008-B, SPHC, SPCC, TP304/304L, TP316/316L, TP321/321L, etc. |
| Fabrication Range | Solid Fins (mm) | Serrated Fins (mm) | ||
|---|---|---|---|---|
| Min | Max | Min | Max | |
| Tube OD (mm) | 19 | 219 | 19 | 219 |
| Fin Height (mm) | 8 | 26 | 8 | 32 |
| Fin Thickness (mm) | 0.8 | 2.8 | 1 | 1.6 |
| Fins Density (mm) | 4 (250 FPM) | 20 | 3.3 (303 FPM) | 20 |
| Tube Length (mm) | N/A | 18000 | N/A | 18000 |
- Tube swaging process for the joint of 2 tubes.
- Spacer rings (material: steel) are available.
- One side solid plain fins and the other side serrated fins — two fin types on the same tube.
- More than 10,000 square meters of workshop, including 4 ERW high frequency welding fining lines, with a daily production capacity of around 40 tons.
- Quality assurance plan for High Frequency Welding Spiral Steel Tubes:
- Raw material control for both plain tubes and fins.
- In-process control with reports such as WPS, PQR & WPQ; weld deposition efficiency test before fabrication; non-destructive test and tensile test, etc.
- Final inspection control with reports (visual and dimensional checks, etc.).
- The High Frequency Resistance Welded Fin Tube is integrally extended for maximum surface area to achieve efficiency. The heat transfer ratio of the high frequency welding fin tube is about 8–9 times higher than other plain tubes.
- This Welded Helical Fin Tube is a singular integral unit, eliminating heat contact resistance and losses. Generally, the tube side temperature can reach up to 800 degrees for stainless steel fins; low carbon steels, withstanding up to 475 degrees, are the most common choice.



TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube