logo

Carbon Steel and Stainless Steel Square Fin Tube with 1.5mm to 3.5mm Fin Thickness and 10mm Minimum Fin Pitch H Fin Tube

Place of Origin:China
Brand Name:DELLOK
Certification:CE. ISO,EN10204. 3.1 Cert.
Model Number:HH FIN
Minimum Order Quantity:N/A Contact us for details
Price:N/A Contact us for details
Payment Terms:L/C, T/T Contact us for details
Supply Ability:60000 meters month
Product Details
Highlight:

P5 Square Fin Tube

,

73mm 316 Stainless Steel Square Tube

,

TP304 Square Fin Tube

Tube OD:: 73 Mm Max.
Tube Length:: 18 Meters Max.
Material: Carbon Steel / Stainless Steel
Type: Fin Tube
Fin Thickness: 1.5mm ~3.5mm
Fin Pitch:: 10mm Min.
Product Description
Product Overview

P5 Square Fin Tube — SA213 T11 / T22 alloy steel tubes with H fins, welded tubes engineered for waste heat recovery units.

Manufactured to ASTM A213 / ASTM A269 standards, available in TP304 / TP304L, TP316 / TP316L bright annealed stainless steel tube.

Introduction

Square or rectangular H fins are welded onto a steel base tube, forming what is known as H Fin Type Tubing. In addition to the finned tube itself, we provide supplementary services including tube swaging, elbows, and bends (90° / 180° or to client design). This product is widely used in economizers, heat exchangers, and marine boilers.

Quality Assurance & Testing

The quality of each square or rectangular H finned tube is assured through hydrostatic or pneumatic tests, eddy current tests, and tensile tests. These verify the mechanical bonding between the inner tube and outer fins.

Acceptance Criteria

Approved drawing and the delivery conditions (TDC) of clients.

Surface Coating

Outside: red oxide zinc phosphate primer. Inside: volatile corrosion inhibitor (VCI) in water-soluble tablet form.

Specifications
ItemsGeneral MaterialsPopular ASTM / ASME Materials
Core Tube MaterialCarbon Steel
Alloy Steel
Heat Resistant Steel
Stainless Steel
1. Carbon Steel: A106 / A179 / A192 / A210, etc.
2. Stainless Steel: TP304 / 304L, TP316 / TP316L, TP347, etc.
3. Alloy Steel: P5, T5, P9, T9, T11, T22
Studs MaterialCarbon Steel
Stainless Steel
1. Carbon Steel
2. Stainless Steel: TP409 / 410, TP304 / 304L, TP316 / TP316L, etc.
Product Details
Tube Details Tube OD: 73 mm max.
Tube Length: 18 meters max.
Fin Thickness: 1.5 mm ~ 3.5 mm
Fin Pitch: 10 mm min.
Production CapacityDaily capacity up to 20 tons.
Competitive Advantages
  • More than 10,000 square meters of workshop space, including 6 H-FIN type finning machines, with daily extrusion capacity up to 20 tons.
  • Square or rectangular finned H-tubes are the preferred tube choice for high-pressure boilers.
  • Fins can be manufactured by stamping process in almost any shape and size.
  • In-line fin and tube spacing allows for cleaning — an excellent choice in sooting or fouling atmospheres.
  • Fin height and spacing are limited only by heat transfer considerations.
  • Fins and tubing can be made from similar or dissimilar metals.
Our Service Process
StepDescription
1Inquiry — professional quotation provided; if you send more item details, we begin discussing further specifics.
2Confirm the price, lead time, payment terms, etc.
3Our sales team sends the Proforma Invoice with our seal, or you may order online.
4Customer makes the deposit payment and sends us the bank receipt.
5Initial production stage — we inform the client that payment has been received and produce samples per your request, sending photos or samples for approval. After approval, we arrange production and inform the estimated time.
6Middle production — we send photos showing the production line so you can see your products, and confirm the estimated delivery time again.
7End production — mass production product photos and samples are sent for your approval. You may also arrange a third-party inspection.
8Client makes the balance payment and ships the goods; we provide the tracking number and check the status for you.
9The order is considered "finished" when you receive the goods and are satisfied with them.
10Feedback on quality, service, market feedback, and suggestions — so we can do better.
Product Image
P5 square fin tube with H-shaped fins welded onto an alloy steel base tube, shown in close-up view
You May Also Like
Quality TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers factory

TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers

TP304L Longitudinal Finned Tube The TP304L Longitudinal Finned Tube is a high-performance heat transfer component designed for demanding industrial applications. Manufactured with precision resistance welding, longitudinal fins are securely bonded to the core plain tube, delivering superior thermal ...
Quality DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube factory

DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube

Cold Drawn Seamless Carbon Steel A179 Extruded Fin Tube A213 T22 , OD1' X 54' Length X 10FPI X Alu 1100 Fins , extruded high fin cooling tube Tube Type:Seamless (Cold Drawn) Ends:Plain ends or bevel ends. Surface protection:black painting,anti-rust oil or varnish. Introduction: A smooth core tube is ...
Quality DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube factory
video

DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube

Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube SA335 P11 / P22 / P91 from BaoSteel , NPS 4'(114.3mm) studded pin heating tubes ASTM A335/A335M: Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service Product Details Material: Carbon, stainless, and alloy steels. Tube details: ...
Quality High Performance Copper Integral Low Fin Tube for Air Conditioning and Heat Exchanger Applications factory

High Performance Copper Integral Low Fin Tube for Air Conditioning and Heat Exchanger Applications

Product Overview DELLOK High Performance Copper Integral Finned Tube Low fin tubes are formed by rolling short fins directly into the tube wall, greatly increasing the surface area compared to a smooth tube. Because the fins are integral to the tube wall, the outside diameter of the finned section ...
Contact Us
you can contact us at anytime!