ASTM A335 Alloy Steel Seamless Studded Tube and Stainless Steel Stud Welding Tube for High-Temperature Heat Transfer
Studs Stainless Steel Round Tube
,A335 Stainless Steel Welded Tube
,OD16mm Stainless Steel Welded Tube
ASTM A335 P5 / P9 seamless alloy steel studded tubes, NPS 4″ (114.3 mm), are engineered for high-temperature service in demanding industrial environments. Manufactured to the ASTM A335 / A335M standard — the specification for seamless ferritic alloy-steel pipe for high-temperature service — these studded tubes deliver reliable performance in petrochemical and heat-transfer applications.
A studded tube, also known as a pin tube or head tube screw ribbed tube, is widely used in the petrochemical industry. It is particularly effective for strengthening heat transfer on the outside of the tube and is commonly applied in heat-transfer components within tube furnace convection chambers.
Studded tubes improve the heat transfer coefficient on the flue gas side. Because the surface area of a studded tube is 2 to 3 times that of a plain (light) pipe, it can achieve the same heat radiation intensity under reasonable operating conditions. Our stud head tube equipment uses resistance welding controlled by a PLC program, with servo-motor feed division. Stud quantities, division parameters, and compensation coefficients are set through a human–machine interface according to process requirements, ensuring consistent product quality and precision.
- Satisfying connection surface with minimal heat loss.
- Welding connection rate higher than 90 percent.
- No external welding power required, with virtually no welding tumor.
- Narrow heated zone on the surface, no melted pool, and no destruction of the base tube structure.
- Welding parameters are strictly set to ensure consistent bulk studded tube quality and eliminate the instability of manual operation.
| Material | Carbon, stainless, and alloy steels. |
| Tube Thickness | 4 mm – 15 mm |
| Tube Length | 16 meters max |
| Tube OD | 219 mm max |
| Studs Height | 10 mm min. |
| Studs OD | OD 6 mm – OD 16 mm |
| Production Capacity | Daily capacity up to 80,000 studs |
| Material | C (%) | Si (%) | Mn (%) | P (%) | S (%) max | Mo (%) | Cr (%) max |
|---|---|---|---|---|---|---|---|
| A 335 Grade P1 | 0.10 – 0.20 | 0.10 – 0.50 | 0.30 – 0.80 | 0.025 | 0.025 | 0.44 – 0.65 | — |
| A 335 Grade P5 | max. 0.15 | max. 0.50 | 0.30 – 0.60 | 0.025 | 0.025 | 0.45 – 0.65 | 4.00 – 6.00 |
| A 335 Grade P11 | 0.05 – 0.15 | 0.50 – 1.00 | 0.30 – 0.60 | 0.025 | 0.025 | 0.44 – 0.65 | 1.00 – 1.50 |
| A 335 Grade P12 | 0.05 – 0.15 | max. 0.50 | 0.30 – 0.61 | 0.025 | 0.025 | 0.44 – 0.65 | 0.80 – 1.25 |
| A 335 Grade P22 | 0.05 – 0.15 | max. 0.50 | 0.30 – 0.60 | 0.025 | 0.025 | 0.87 – 1.13 | 1.90 – 2.60 |
| Items | General Materials | Popular ASTM / ASME Materials |
|---|---|---|
| Core Tube Material | Carbon steel, alloy steel, heat-resistant steel, stainless steel |
1. Carbon Steel: A106 Gr. B 2. Stainless Steel: TP304/304L, TP316/TP316L, TP347 3. Alloy Steel: P5, T5, P9, T9, T11, T22 |
| Studs Material | Carbon steel, stainless steel |
1. Carbon Steel 2. Stainless Steel: TP409/410, TP304/304L, TP316/TP316L, TP321/TP321L |
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube