Continuous Hairpin 1500mm Welded Fin Tubes Seamless Cold Drawn U Bend Tube for Boiler U Tube Bundle
ASTM Welded Fin Tubes
,ASTM Welding Stainless Steel Tube
,EN 10204 U Shaped Metal Pipe
Continuous hairpin metal U-shaped welded fin tubes, supplied in 1500 mm configurations, are engineered for demanding heat-transfer applications. Manufactured from ASTM A106 seamless carbon steel, these continuous hairpin welded steel U-tube bundles deliver reliable performance in boilers and economizers.
- Material Grades: ASTM A106B / ASME SA106B (Grades A, B, C available)
- Additional Standards: ASTM A179 / ASME SA179, ASTM A192 / ASME SA192, ASTM A213 T11 / T22
- Tube Type: Seamless (cold drawn)
- Tube Ends: Plain ends or bevel ends
| Grade | C ≤ | Mn | P ≤ | S ≤ | Si ≥ | Cr ≤ | Cu ≤ | Mo ≤ | Ni ≤ | V ≤ |
|---|---|---|---|---|---|---|---|---|---|---|
| A | 0.25 | 0.27–0.93 | 0.035 | 0.035 | 0.10 | 0.40 | 0.40 | 0.15 | 0.40 | 0.08 |
| B | 0.30 | 0.29–1.06 | 0.035 | 0.035 | 0.10 | 0.40 | 0.40 | 0.15 | 0.40 | 0.08 |
| C | 0.35 | 0.29–1.06 | 0.035 | 0.035 | 0.10 | 0.40 | 0.40 | 0.15 | 0.40 | 0.08 |
- Hydrostatic or nondestructive electric testing.
- Heat treatment performed in accordance with the applicable standard.
- Surface condition conforming to standard requirements.
- Grain size verified according to standard.
- Sampling includes flattening, flaring, grain size, and marking checks.
- Value-added services: bevel ends, plastic caps, varnish coating, oiled or black-painted finishes to prevent rust, plus customized packing solutions.
ASTM A106, ASTM A179, ASTM A192, ASTM A210, and equivalent specifications.
All tubes are marked along the full length by marking machine prior to bending. Bent sections are not marked after heat treatment.
- TEMA RCB 2.31 Standard of the Tubular Exchanger Manufacturers Association (9th Edition).
- ASTM A688 / ASME SA688 — Standard specification for welded austenitic corrosion-resistant steel tubes designed for feed water boilers.
- ASTM B163 / ASME SA163 — Standard technical requirements for nickel and nickel alloy tubes for condensers and heat exchangers.
From 1.5 × OD (outside diameter) up to 1500 mm. When ordering tubes with a radius less than or equal to 1.5 × OD, geometric precision must be agreed upon in advance.
35000 mm.
Minimum 1 meter; maximum 16500 mm (for maximum radius R = 1500 mm).
Stress relieved after U-bending, covering the bending area plus 300 mm for each leg.
Maximum test pressure 600 bar with a 10-second soak. Medium: demineralized water. Compressed air cleaning is performed after the hydro test.
Tubes are packed in strong, transport-worthy pre-fumigated wooden boxes sized to each tube length, radius, and diameter according to PO requirements. Each tube is wrapped in polyethylene film with soft plastic caps on both ends.
| Standard | Grade | C | Si | Mn | P | S | Cr | Mo | Cu | Ni | V |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ASTM A179 | A179 | ≤0.06–0.18 | / | 0.27–0.63 | ≤0.035 | ≤0.035 | — | — | — | — | — |
| ASME SA106 | SA106B | 0.17–0.25 | ≥0.1 | 0.70–1.00 | ≤0.030 | ≤0.030 | ≤0.035 | — | — | — | — |
| ASTM A106 | A | ≤0.25 | ≤0.10 | 0.27–0.93 | ≤0.035 | ≤0.035 | ≤0.40 | ≤0.15 | ≤0.40 | ≤0.40 | ≤0.08 |
| ASTM A106 | B | ≤0.30 | ≤0.10 | 0.29–1.06 | ≤0.035 | ≤0.035 | ≤0.40 | ≤0.15 | ≤0.40 | ≤0.40 | ≤0.08 |
| ASTM A106 | C | ≤0.35 | ≤0.10 | 0.29–1.06 | ≤0.035 | ≤0.035 | ≤0.40 | ≤0.15 | ≤0.40 | ≤0.40 | ≤0.08 |
| ASTM A53 | A | 0.25 | / | 0.95 | 0.05 | 0.045 | 0.40 | 0.15 | 0.40 | 0.40 | 0.08 |
| ASTM A53 | B | 0.30 | / | 1.20 | 0.05 | 0.045 | 0.40 | 0.15 | 0.40 | 0.40 | 0.08 |
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube