SA 179 Galvanized Extruded Fin Tube Support for Extruded Finned Tube Heat Exchanger Systems
Galvanized Pipe Extruded Finned Tubes
,SA 179 Extruded Finned Tubes
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff members.
Our production capabilities include 4 aluminum processing lines with an annual processing capacity exceeding 20,000 tons, 5 tube-drawing production lines, and 47 fin tube production lines — including 1 imported McElroy production line from the United States — with an annual production capacity of over 12 million meters.
Quality is our eternal pursuit. Our meticulous production workshop, standardized management system, and systematic quality assurance represent Dellok (YONGHUI)'s commitment to quality. Quality control is not limited to final inspection — it spans the entire production process. We implement a comprehensive quality control and assurance system: each batch of pipes is sampled, tested, and recorded as a guarantee of final product quality.
The cold-rolled finned tube processing technology for steel and aluminum begins with an aluminum tube and a steel tube formed into a bimetallic composite tube. The finned tube is then shaped through mechanical cold rolling.
Based on the physical characteristics of the aluminum tube, a finned tube is produced with the steel tube as the core, tightly bonded with the cold-rolled aluminum fin.
The fins are rotary cold-rolled from a smooth, thick-walled hollow blank tube slid over the core tube. Three multi-spindle disc packs extrude the hollow blank tube into helical high fins.
During this process, the inner diameter of the hollow blank tube is reduced and simultaneously pressed onto the core tube, resulting in a mechanically solid joint.
- Fin Material: Aluminium / Copper
- Core Tube Material: Carbon Steel, Carbon Alloy Steel, Stainless Steel, Nickel Alloys, Copper, Copper Alloys, Titanium
- Easy to clean with a high-pressure water jet without deforming the fins
- The tube is not mechanically stretched to adhere to the fins
- Uniform and reliable heat transfer
- No galvanic corrosion between the tube and fins
- The fins are vibration resistant
- Perfectly suited to industrial applications
- Unequalled quality-to-price ratio for demanding applications
Aluminum fins are formed from a bimetallic tube consisting of a base tube and an aluminum muff tube. The fins are created through a cold rolling process from the wall thickness of the aluminum muff tube. Extruded fins provide very good corrosion protection to the base tube, as the base tube is not exposed to the atmosphere between the fins.
Maximum operating temperature for extruded finned tube: 325°C
- Fin Material: Aluminium (or Copper)
- Tube Material: No theoretical limit
These fin tubes find application in air fin coolers, driers, radiators, and similar equipment. They are preferred across industries including food and agriculture, power plants, chemical industries, steel plants, and chiller plants.
| Product Specification | ||
|---|---|---|
| Tube OD | 10–51 mm | 0.4"–2" |
| Tube Wall Thk | 1.65–3.0 mm | 0.065"–0.118" |
| Tube Length | ≤18,500 mm | ≤60.7 ft |
| Fin Thk | 0.3–1.2 mm | 0.012"–0.047" |
| Fin Height | 5–16 mm | 0.2"–0.63" |
| Fin Pitch | 100–555 mm | 3–14 FPI |
| Fin Type | Extruded | |
| Component | Material Options |
|---|---|
| Fin Material | Aluminum (most common grades: Alu. 1100, Alu. 1060, Alu. 6063); Copper |
| Tube Material |
C.S. (most common grades: A179, A192, SA210 GrA1/C, A106 Gr B) S.S. (most common grades: TP304, 316, 321, 347, A789) Copper (most common grades: UNS12200, 14200, 70600, CuNi70/30, CuNi 90/10) Titanium (most common grade: B338Gr2) |
| Applied Temperature | 300°C |
| Type of Service | Medium temperature, severe atmospheric corrosive environment |
- Fin Type: Extruded Fin Tube
- Tube Material: Copper, copper nickel, stainless steel, titanium, etc.
- Fin Material: Copper, aluminum
Aluminum extruded finned tubes use a base tube covered with an aluminum tube (the base tube may be carbon steel, stainless steel, or copper) that is machine-extruded to form a tube fin. The fin base and the tube outer wall are closely fitted, enabling finned tubes with a high heat transfer coefficient and excellent heat transfer performance.
Aluminum extruded finned tubes — also called "integral finned tubes" — are produced by covering the base tube with an aluminum tube and machine-extruding to form a tube fin. The fin base and tube outer wall are closely fitted, giving the finned tube a high heat transfer coefficient and heat transfer performance. Extruded finned tubes can be made from iron, copper, or aluminum tube by compound rolling, offering the advantages of tight bonding, low thermal resistance, good heat transfer performance, high strength, low flow loss, strong anti-corrosion performance, resistance to deformation under long-term hot and cold working conditions, and long service life.
Process flow: Pipe line → compressing or rolling → strip peeling → washing → pressure test → blast blowing → packaging.
The extruded fin tube is formed from a bimetallic tube consisting of an aluminum outer tube and an inner tube of almost any material. The fin is formed by rolling the material from the outside of the outer tube to provide an integrated fin with excellent heat transfer performance and service life. Extruded fins provide excellent corrosion protection for the base tube.
The production method of the composite finned tube mainly includes the extrusion method: the bimetallic composite tube is lined with a mandrel and driven by the rotation of the roller blade. The composite tube is processed on the outer surface through the cavity formed by the rolling groove and the core head to produce fins. The heat transfer tube produced by this method is an organic whole with its outer tube and fins, so there is no contact heat loss — resulting in good performance and high heat transfer efficiency.
A fin tube is a tube with small fins around its outside surface. These fins act as a filter and a mechanism to transfer heat from the material inside the tube to the outside space, or vice versa. Fin tubes are used in applications requiring heat transfer from a hot fluid to a colder fluid through the tube wall. The rate of heat transfer depends on three factors: the temperature difference between the two fluids, the heat transfer coefficient between each fluid and the tube wall, and the surface area to which the fluid is exposed.
Finned tube heat exchangers generally use air to cool or heat fluids such as air, water, oil, or gas, or they can be used to capture or recover waste heat. These heat exchangers are used in a broad range of industries including oil & gas, power generation, marine, and HVAC&R.
Extruded finned tubes are bimetallic tubes whose outer aluminum surface is finned by cold plastic deformation. Two major types are available: single metal tubes (also called mono-metallic fin tubes) and bimetallic tubes (composite extruded fin tubes).
Good corrosion resistance, formability, and high thermal conductivity make aluminum an ideal material for the construction of these heat exchangers. A typical brazed heat exchanger (radiator or condenser) comprises fins, tubes, side plates, and header plates.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube