DIN 17458 0.5mm Wall Thickness 316 Stainless Steel Seamless Tube for Thin Wall Stainless Steel Seamless Tubing Applications
0.5mm 316 Stainless Steel Seamless Tubes
,DIN17458 Stainless Steel Seamless Tubes
,DIN 17458 Stainless Steel Round Tubing
Thin Wall Seamless DIN 17458 0.5mm 316 Stainless Steel Tubing — pickled or bright annealed stainless steel seamless tube, manufactured to ASME SA213 TP316 / TP316L.
ASME SA213/A213: Seamless ferritic and austenitic alloy-steel boiler, superheater and stainless steel heat exchanger tubes.
ASTM A249 / A249M: Welded austenitic steel boiler, superheater heat-exchanger and condenser tubes.
Additional standards: DIN 17456, DIN 17458, EN 10216-5, GOST 9940-81, GOST 9941-81, JIS-G3463, and more.
| Standard | Available Grades |
|---|---|
| American Standard |
Austenitic Steel: TP304, TP304L, TP304H, TP304N, TP310S, TP316, TP316L, TP316Ti, TP316H, TP317, TP317L, TP321, TP321H, TP347, TP347H, 904L Duplex Steel: S32101, S32205, S31803, S32304, S32750, S32760 Others: TP405, TP409, TP410, TP430, TP439 |
| European Standard | 1.4301, 1.4307, 1.4948, 1.4541, 1.4878, 1.4550, 1.4401, 1.4404, 1.4571, 1.4438, 1.4841, 1.4845, 1.4539, 1.4162, 1.4462, 1.4362, 1.4410, 1.4501 |
| Russian Standard | 08Х17Т, 08Х13, 12Х13, 12Х17, 15Х25Т, 04Х18Н10, 08Х20Н14С2, 08Х18Н12Б, 10Х17Н13М2Т, 10Х23Н18, 08Х18Н10, 08Х18Н10Т, 08Х18Н12Т, 08Х17Н15М3Т, 12Х18Н10Т, 12Х18Н12Т, 12Х18Н9, 17Х18Н9, 08Х22Н6Т, 06ХН28МДТ |
| Production | Outside Diameter | Wall Thickness |
|---|---|---|
| Boiler Tube | 6.00 mm to 101.6 mm | 0.5 mm to 8 mm |
Final finishing: Solution annealed & pickled / bright annealed.
Tube types: U-bend & straight.
| Test | Description |
|---|---|
| Corrosion Test | Conducted only when specially requested by the client. |
| Chemical Analysis | Performed as per required quality standards. |
| Destructive / Mechanical Testing | Tensile, hardness, flattening, flare, and flange tests. |
| Reverse-Bend & Re-Flat Tests | Carried out in full compliance with relevant standards and ASTM A-450 / A-530 norms, ensuring trouble-free expansion, welding and use at the customer's end. |
| Eddy Current Testing | Detects inhomogeneities in the subsurface using a digital flaw-mark testing system. |
| Hydrostatic Testing | 100% hydrostatic testing per ASTM A-450 norms to check tube leakage; maximum supported pressure is 20 MPa / 7 s. |
| Air Under Pressure Test | Checks for any evidence of air leakage. |
| Visual Inspection | After passivation, every single length of tube and pipe undergoes thorough visual inspection by trained staff to detect surface flaws and other imperfections. |
In addition to the tests above, the following supplementary tests are carried out on manufactured products:
- Eddy Current Testing
- O.P. Testing
- Radiography Testing
- Corrosion Testing
- Micro Testing
- Macro Testing
- IGC Testing
- Ultrasonic Testing
- Liquid Penetrant Testing
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube