TP316Ti OD 152mm Corrugated Stainless Steel Tubing Seamless Stainless Steel Tube
152mm Corrugated Stainless Steel Tubing
,A213 Seamless Stainless Steel Tube
,TP316Ti Stainless Steel Tubing
DELLOK A213 TP316Ti OD 152mm Corrugated Stainless Steel Tubing
Stainless steel seamless tube manufactured to ASTM A213 TP316Ti, available in wall thicknesses of 0.89 mm, 1.24 mm and 1.65 mm.
Standards: ASTM A213 / ASME SA213, ASTM A789, ASME SA789, SB677
Additional materials: TP304/304L, TP310S/310H, TP316/316L, TP316Ti, TP317/317L, TP321/321H, TP347/347H, 904L
OD range: 6 mm – 152 mm | Thickness range: 0.6 mm – 30 mm
Heat exchanger stainless steel seamless tubes are supplied in TP304/304L, TP310/310S, TP316/316L, TP317/317L, TP321/321H, TP347H and UNS N08904/904L grades, in accordance with ASTM A213/ASME SA213 and ASTM B677/ASME SB677.
| Steel Types | Size Range |
|---|---|
| Stainless steel seamless pipe & tube | OD: 6–609.6 mm | WT: 0.6–50 mm |
| Products | Typical Steel Grade |
|---|---|
| Austenitic | TP304, TP304L, TP304H, TP316, TP316L, TP316H, TP316Ti, TP321, TP321H, TP347H, 904L, TP310H, TP310S, TP317, TP317L |
| Duplex / Super Duplex | S31803, S32205, S32750, S32760, S31500, S32304, S31254 |
| Standard Type | Standard |
|---|---|
| EN | EN 10216-5, EN 10216-2 |
| DIN | DIN 17456, DIN 17458 |
| ASTM | ASTM A312, A213, A269, A511, A789, A790, etc. |
| GOST | GOST 9941, GOST 5632 |
| JIS | JIS G3459, JIS G3463 |
| GB | GB/T 14975, GB 13296, GB 5310, GB 9948 |
- A999/A999M: Each pipe shall be subjected to the non-destructive electric test or the hydrostatic test; the test method used shall be at the manufacturer's option unless otherwise specified in the purchase order.
- Pipe lengths: Unless otherwise agreed, all sizes from NPS 1/8" up to and including NPS 8 are available in lengths up to 24 ft, with a permitted range of 15 to 24 ft. Short lengths are acceptable; the quantity and minimum length shall be agreed between manufacturer and purchaser.
- Finish: The finished pipe shall be reasonably straight and have a workmanlike finish. Removal of imperfections by grinding is permitted, provided the wall thickness is not reduced below the minimum permitted in Section 9 of Specification A999/A999M.
- Butt weld end: According to ANSI B16.25.
- Pipe marking: As specified in A999/A999M, including "Logo (YHSS) + Standard + Size + Heat No. + Lot No. + H.T/E.T/U.T".
- Packing: Each pipe end is protected by a plastic cap, then packed with anti-rust steel strip. The outside of the bundle is wrapped in a plastic woven bag or plastic film.
- Packing mark: Size + Steel Grade + Quantity of Pieces / Weight / Metre.
- MTC: BWSS official original MTC paper will be supplied for each order.
Packing options: by bundle, by wooden yoke, or by wooden case.
- Pipes and tubes for the petrochemical industry
- Pharmaceutical industry
- Food industry
- Aviation and aerospace industry
- Architectural decoration industry
| Test / Inspection | Details |
|---|---|
| Corrosion Test | Conducted only when specially requested by the client. |
| Chemical Analysis | Test performed as per required quality standards. |
| Destructive / Mechanical Testing | Tensile, hardness, flattening, flare and flange tests. Reverse-bend and re-flat tests are carried out in full compliance with relevant standards and ASTM A-450 and A-530 norms, ensuring trouble-free expansion, welding and use at the customer's end. |
| Eddy Current Testing | Performed to detect inhomogeneities in the subsurface using a digital flaw-mark testing system. |
| Hydrostatic Testing | 100% hydrostatic testing carried out according to ASTM A-450 norms for checking tube leakage; maximum supported pressure is 20 MPa / 7 s. |
| Air Under Pressure Test | To check for any evidence of air leakage. |
| Visual Inspection | After passivation, every single length of tube and pipe is subjected to thorough visual inspection by trained staff to detect surface flaws and other imperfections. |
- Inquiry: Professional quotation provided; if you send more details on the inquiry item, we will begin discussing the specifics.
- Confirm the price, lead time, payment terms, etc.
- Our sales team sends the Proforma Invoice with our seal, or you may place your order online.
- Customer makes the deposit payment and sends us the bank receipt.
- Initial production stage: We inform the client that payment has been received and prepare samples according to your request, sending photos or samples for approval. After approval, we arrange production and inform the estimated time.
- Middle production stage: We send photos showing the production line so you can see your products, and confirm the estimated delivery time again.
- End production stage: Mass production product photos and samples are sent to you for approval. You may also arrange third-party inspection.
- Client makes the balance payment and ships the goods; we inform you of the tracking number and check the status on your behalf.
- The order can be considered "finished" once you receive the goods and are satisfied with them.
- Feedback: Share your feedback on quality, service, market response and suggestions so we can continue to improve.



TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube