ASTM A106 Seamless Stainless Steel Fin Tube 3.2mm Heating Finned Tube for High Temperature Service
ASTM A106 Stainless Steel Fin Tube
,Heating stainless seamless tubing
,3.2mm Stainless Steel Fin Tube
This specification covers seamless carbon steel tube for high-temperature service. These tubes are suitable for welding, bending, flanging, and similar forming operations.
Strictly tested in accordance with the ASTM A106 standard, our products' chemical composition and physical properties fully meet the requirements of the standard. This product is a seamless steel tube, produced by either cold drawing or hot rolling, with an outer diameter range of 1/8 in–48 in (3.2 mm–1219.2 mm). Cold-drawn tubes typically range from 8 mm to 168.3 mm, while hot-rolled tubes are greater than 168.3 mm.
For antirust protection, customers may request black painting, blue painting, or oil soaking. For both-end protection, plastic caps are available upon request. For up-market requirements, additional internal and external burr cleaning and beveling can be specified.
ASTM A106 Grade A seamless carbon steel tubes are widely used in high-temperature industries. This product is mainly used for headers and steam pipes of low and medium pressure boilers, where the working pressure is generally not more than 5.88 MPa and the working temperature is below 450 °C.
| Standard | Grade No. | C | Si | Mn | P | S | Cr | Mo | Cu | Ni | V |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ASTM A106 | A106A | ≤0.25 | >0.1 | 0.27–0.93 | ≤0.035 | ≤0.035 | ≤0.4 | ≤0.15 | ≤0.4 | ≤0.4 | ≤0.08 |
| A106B | ≤0.3 | >0.1 | 0.29–1.06 | ≤0.030 | ≤0.030 | ≤0.4 | ≤0.15 | ≤0.4 | ≤0.4 | ≤0.08 | |
| A106C | ≤0.35 | >0.1 | 0.29–1.06 | ≤0.030 | ≤0.030 | ≤0.4 | ≤0.15 | ≤0.4 | ≤0.4 | ≤0.08 |
All values are expressed in percentage (%).
| Standard | Steel Pipe No. | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) | Impact Energy (J) | Hardness |
|---|---|---|---|---|---|---|
| ASTM A106 | A106A | ≥330 | ≥205 | ≥28 | ≥35 | / |
| A106B | ≥415 | ≥240 | ≥22 | ≥35 | / | |
| A106C | ≥485 | ≥275 | ≥20 | ≥35 | / |
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube