Customized Bimetallic Extruded Fin Tube for Heat Exchanger and Extruded Finned Tube Applications
Bimetallic Extruded Fin Tube
,Extruded Fin Tube for heat-exchanger
The DELLOK Superior Bimetallic Extruded Fin Tube is engineered for high-performance heat exchangers. Manufactured through a cold rotary extrusion process, the outer aluminium tube is mechanically bonded to the inner base tube, delivering exceptional heat transfer efficiency and durability under demanding operating conditions.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 staff, and retains 33 technical specialists.
Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from McElroy (USA)
- Annual production capacity of 12 million meters or more
Quality is our eternal pursuit. Our production workshop features meticulous workmanship, a standardized management system, and systematic quality assurance — Dellok (YONGHUI)'s best commitment to quality. Quality control is not limited to final inspection; it extends throughout the entire production process. We implement a comprehensive quality control and assurance system, with each batch of pipes sampled, tested, and recorded as a quality guarantee for the final product.
- Optimized inner-to-outer surface ratio
- High heat exchange rate
- Enhanced structure due to the roll forming process
- Flexible as straight tube, bent, or coiled heat exchangers
- Low heat resistance between fins and tube
- Strong resistance to shock and thermal expansion/contraction
- Cost and energy saving due to long service life and high exchange rate
Murphy exports Extruded Fin Tubes manufactured by a cold rotary extrusion process. The extruded fin is formed from an outer aluminium tube with a large wall thickness, aligned over an inner base tube. Both tubes are pushed through three arbors with rotating discs that squeeze or extrude the aluminium fins up and out of the muff material in a spiral shape in a single operation.
The extrusion process hardens the fins and prevents dissimilar metal contact at the fin root. The exposed external surface is aluminium, with no minute gaps between adjacent fins where moisture can penetrate. This ensures the high efficiency expected when using an extended surface for heat transfer. During the finning process, a tight mechanical bond is formed between the finned aluminium outer tube and the inner base tube of the required metal.
The finned tube we provide is the Extruded Type, which differs from those made through HF welding and wrapping methods. The fins are obtained by roll forming the outer surface of a soft seamless plain tube. This technology simply squeezes the wall thickness, transforming it into straight fins on the tube. The fin and tube are integrated and inseparable, which avoids heat resistance between fin and tube and optimizes heat exchange efficiency.
Based on this structure, the extruded type can withstand more severe working conditions than other finned tubes. It also offers several unique features such as enhanced physical structure, resistance to vibration, anti-corrosion ability, and long service life.
Under this technology, two major types of finned tubes are available: single metal tubes and bimetallic tubes. Single metal tubes use copper, aluminum, or copper-nickel alone. Bimetallic tubes have a core tube on the inside made of harder material; the outer tube is rolled onto the core tube to provide a tight bond and good thermal contact between the two tubes.
Customized finned tubes are available. The specification table is provided below. If required, the fin tube can be made into various forms after the soft annealing process. They can be used for cooling and heating across a large range of conditions — for example, coils in water heaters, oil coolers in large machines, heat transfer parts in boilers and heat recovery systems, and condenser or evaporator parts in the air-conditioning and refrigeration industry.
Our fin tube materials cover Copper (C10200, C12000, C12200), Copper Nickel (C70600), Aluminum (1060), Aluminum alloy, Aluminum-Steel (bimetallic), Aluminum-Stainless Steel (bimetallic), Aluminum-Copper (bimetallic), Aluminum-Copper Nickel (bimetallic), and Copper-Copper Nickel (bimetallic).
Our fin tube range covers Integrated Finned Tube of Copper (C10200, C12000, C12200), Cupronickel (C70600), Aluminum (1060), and Aluminum Alloy (AISI6063); Bimetallic Finned Tube such as Copper-Aluminum, Copper Alloy-Aluminum, Steel-Aluminum, and Stainless Steel-Aluminum; and Laser Welded Fin Tube using Stainless Steel and Titanium.
We maintain a wide and comprehensive product range and can produce all relevant types of products available in the market, as shown in the figure below:
We can package products according to customer requirements to ensure safe arrival under all transportation scenarios. If you have special packaging requirements, please contact us.
A fin tube is a tube with small fins around its outside surface. These fins act as a mechanism to transfer heat from the material inside the tube to the outside space, or vice versa. Fin tubes are used in applications requiring heat transfer from a hot fluid to a colder fluid through the tube wall. The rate of heat transfer depends on three factors: the temperature difference between the two fluids, the heat transfer coefficient between each fluid and the tube wall, and the surface area to which the fluid is exposed.
Finned tube heat exchangers generally use air to cool or heat fluids such as air, water, oil, or gas, or they can capture or recover waste heat. These heat exchangers are used in a broad range of industries including oil & gas, power generation, marine, and HVAC&R.
Extruded finned tubes are bimetallic tubes whose outer aluminium surface is finned by cold plastic deformation. Two major types are available: single metal tubes (mono-metallic fin tube) and bimetallic tubes (composite extruded fin tube).
Good corrosion resistance, formability, and high thermal conductivity make aluminium an ideal material for heat exchanger construction. A typical brazed heat exchanger (radiator or condenser) comprises fins, tubes, side plates, and header plates.
Extruded fin tubes are widely used in the refinery, petrochemical, and chemical industries for air-cooled condensers, air-cooled coolers for products, gas coolers, and gas heaters.
We adhere to an in-house Quality System (QMS) based on industry standards such as ASME, the National Board of Boilers & Pressure Vessels, and customer requirements. Our quality system is documented, audited, and enforced by our Quality Control department.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube