2.5mm Fin Height 2.5mm Fin Pitch 0.2mm Fin Thickness Extruded Fin Tube Bimetallic Fin Tube for Heat Exchanger
Aluminium Extruded Fin Tube
,Finned Aluminum Extrusion Tube
The DELLOK Extruded Fin Tube is a high-performance bimetallic fin tube designed for use in heat exchangers. Manufactured through a cold roll-forming extrusion process, the outer aluminum surface is transformed into straight fins that are integrally bonded to the base tube, delivering exceptional heat transfer efficiency and mechanical strength.
Product Model: AJX1000Z181
Note: The product images displayed on this page are for reference only. The specific product model, size, specification, material, and other technical information must be customized according to your requirements.
- Optimized inner-to-outer surface ratio
- High heat exchange rate
- Enhanced structure due to the roll forming process
- Flexible as straight tube, bent, or coiled heat exchangers
- Low heat resistance between fins and tube
- Strong resistance to shock and thermal expansion and contraction
- Cost and energy saving due to long service life and high exchange rate
The Extruded Fin Tube, also known as a Bimetallic Fin Tube, is one of the most preferred finning processes for various applications. The fins are manufactured by extruding aluminum onto an aluminum muff tube that is fitted with close tolerance over the base tube.
Extrusion takes place on a continuous fin extruder with three tooling rolls at high pressures in the range of 1200 psi. Because of the cold working process, the bond between the tube and fin is flawless, giving excellent heat transfer efficiency. At the same time, the mechanical strength of the fins is drastically enhanced.
The finned tube we provide is of the Extruded Type, which differs from those produced through HF Welding and Wrapping methods. The fins are obtained by roll forming the outer surface of a soft seamless plain tube. This technology simply squeezes the wall thickness, transforming it into straight fins on the tube. As a result, the fin and the tube are integrated and inseparable, which avoids heat resistance between fin and tube and optimizes heat exchange efficiency.
Based on this structure, the Extruded type can withstand more severe working conditions than other finned tubes. It also demonstrates several unique features such as enhanced physical structure, resistance to vibration, anti-corrosion ability, and long service life.
Under this technology, two major types of finned tubes are available: single metal tubes and bimetallic tubes. The former uses copper, aluminum, or copper-nickel alone. The latter has a core tube on the inside made of harder material, with the outer tube rolled onto the core tube to provide a tight bond and good thermal contact between the two tubes.
Customized finned tubes are available. If required, the fin tube can be made into various forms after the soft annealing process. They can be used for cooling and heating in a large range of conditions — for example, coils in water heaters, oil coolers in large machines, heat transfer parts in boilers and heat recovery systems, and condenser or evaporator parts in the air-conditioning and refrigeration industry.
The material for our fin tube covers Copper (C10200, C12000, C12200), Copper Nickel (C70600), Aluminum (1060), Aluminum alloy, Aluminum-Steel (bimetallic), Aluminum-Stainless Steel (bimetallic), Aluminum-Copper (bimetallic), Aluminum-Copper Nickel (bimetallic), and Copper-Copper Nickel (bimetallic).
The fin tubes available from us cover Integrated Finned Tube of Copper (C10200, C12000, C12200), Cupronickel (C70600), Aluminum (1060), and Aluminum Alloy (AISI6063); Bimetallic Finned Tube such as Copper-Aluminum, Copper Alloy-Aluminum, Steel-Aluminum, Stainless Steel-Aluminum; and Laser Welded Fin Tube using Stainless Steel and Titanium.
We have a wide and comprehensive range of products and can produce all relevant types of products in the market, as shown in the figure below:
We can package the products according to the customer's requirements to ensure the safe arrival of the products in all kinds of transportation scenarios. If you have special requirements on packaging, please contact us.
A fin tube is a tube that has small fins around the outside surface. These fins act as a filter and a mechanism to transfer heat from the material inside the tube to the outside space or vice versa. Fin tubes are used in applications that require a transfer of heat from a hot fluid to a colder fluid through the tube's wall. The rate at which such heat transfer occurs depends on three factors:
- The temperature difference between the two fluids.
- The heat transfer coefficient between each of the fluids and the tube wall.
- The surface area to which the fluid is exposed.
Finned tube heat exchangers generally use air to cool or heat fluids such as air, water, oil, or gas, or they can be used to capture or recover waste heat. These heat exchangers can be used in a broad range of industries including oil & gas, power generation, marine, and HVAC&R.
Extruded finned tubes are bimetallic tubes whose outer aluminum surface is finned by cold plastic deformation. There are two major types of finned tubes available: single metal tubes (also called mono-metallic fin tubes) and bimetallic tubes (composite extruded fin tubes).
Good corrosion resistance, formability, and high thermal conductivity make aluminum an ideal material for the construction of these heat exchangers. A typical brazed heat exchanger (radiator or condenser) comprises fins, tubes, side plates, and header plates.
Extruded fin tubes are widely used in the refinery, petrochemical, and chemical industries for:
- Air-cooled condensers
- Air-cooled coolers for products
- Gas coolers
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After many years of development, the company now has 66 million yuan in fixed assets, more than 200 employees, and 33 technical staff.
We have 4 aluminum processing production lines with an annual processing capacity of more than 20,000 tons; 5 tube-drawing production lines; 47 fin tube production lines; and 1 imported production line from the American brand McElroy, with an annual production capacity of 12 million meters or more.
Quality is the eternal pursuit of our company. Meticulous work, a standardized management system, and systematic quality assurance are DELLOK (YONGHUI)'s best commitment to quality. In DELLOK (YONGHUI), quality control is not only the detection of the final process but is applied throughout the entire production process. We implement a comprehensive set of quality control and assurance systems. Each batch of pipes is sampled and tested, and records are kept as a quality guarantee for the final product.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube