Aluminum Embedded Fin Tube G Fin Tube for Boiler Air Cooler High Temperature Applications
Aluminum Embedded Fin Tube
,G Type Embedded Fin Tube
Dellok Aluminum Embedded Fin Tube for Boiler Air Cooler
The fin strip is wound into a mechanically produced groove and tightened by back filling of the base material under pressure, with a groove depth of approximately 0.4 mm. This construction delivers a stable, high-efficiency heat transfer surface suited to demanding boiler and air cooler service.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After many years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff.
Our production base includes 4 aluminum processing lines with an annual processing capacity of over 20,000 tons, 5 tube-drawing lines, and 47 fin tube production lines — including one imported McElroy line from the United States — with an annual production capacity of more than 12 million meters.
Quality is our eternal pursuit. Meticulous workmanship, a standardized management system, and systematic quality assurance are Dellok (YONGHUI)'s best commitment to quality. Quality control is not limited to final inspection; it runs throughout the entire production process. We implement a complete quality control and assurance system, and each batch of pipes is sampled, tested, and recorded as a guarantee for the final product.
The fin strip is wound into a mechanically produced groove and tightened by back filling of the base material under pressure. Groove depth is approximately 0.4 mm.
Carbon steels, low-alloy steels, stainless steels, brass, copper (Copper Finned Pipe), copper-nickel alloys, aluminium bronze (Aluminum Finned Tube), nickel alloys (Alloy 400, etc.), bimetallic, titanium, and others.
Aluminium, copper (Finned Copper Pipe), steel, and galvanized steel.
The manufacturing tool consists of two non-cutting plates set at 90° to the axis of the base tube (core tube). The first plate cuts a groove for metal spinning. The second directs the ribbon into the groove and sets the fin foot in place through pressure on the displaced metal. A similar plate made of tungsten carbide allows us to manufacture G embedded fin tubes (Finned Aluminum Tubing) with base tubes made of austenitic steel or exotic alloys.
- High fin stability, excellent heat transfer, and high operating temperature capability.
- The fin-to-tube wall contact remains constant due to the embedding process, enabling wall temperatures of up to 450 °C.
- The fin is set throughout its length and consequently does not unwind even when partially uprooted.
- One of the optimum choices for achieving a favorable effectiveness-to-cost ratio.
- High performance and efficiency.
- Suitable for high operating temperatures.
- Can be used for both low and high temperature applications.
- Dimensionally stable.
- Resists high mechanical and thermal loads and shocks.
- Fin contact: mechanical bond (fin embedded in tube groove).
- Maximum tube wall operating temperature: 400 °C.
- Type of service: high temperature.
- Petroleum, chemical, and petrochemical industries.
- Natural gas treatment.
- Steel industry: blast furnace and converter systems.
- Power generation: steam turbine exhaust condensing.
- Contact condensing with cooling of circulating condensate.
- Fossil and nuclear power plants.
- Air conditioning (freon, ammonia, propane).
- Incineration of household refuse.
- Compressor coolers, etc.
| Product Specification | Metric | Imperial |
|---|---|---|
| Tube OD | 19–51 (mm) | 3/8"–2" |
| Tube Wall Thickness | 2.11–3.5 (mm) | 0.083"–0.138" |
| Tube Length | ≤ 18,500 (mm) | ≤ 60.7 ft |
| Fin Thickness | 0.3–0.5 (mm) | 0.012"–0.02" |
| Fin Height | 10–16 (mm) | 0.394"–0.63" |
| Fin Pitch | 100–433 FPM | 3–11 FPI |
| Fin Type | G | — |
| Component | Materials |
|---|---|
| Fin Material | Aluminum (most common grades: Alu. 1100, Alu. 1060, Alu. 6063); Copper |
| Tube Material | C.S. (most common grades: A179, A192, SA210 GrA1/C, A106 Gr B); S.S. (most common grades: TP304, 316); Copper (most common grades: UNS12200, 14200, 70600, CuNi 70/30, CuNi 90/10); Titanium (most common grade: B338 Gr2) |
| Applied Temperature | 400 °C |
| Type of Service | High temperature |
Finned tubes are the main components of heat exchangers. They are a series of tubes where fins have been added on the outside to increase the contact area with the outside fluid, enabling heat exchange between the fluid inside the tube and the fluid outside the tube.
Our main markets include the aerospace, oil and gas, nuclear, power generation, chemical process, and medical device industries. We are also developing products for emerging sectors such as desalination, geothermal energy, sports, and the automotive industry. We are continually innovating, so if you require tubing for other applications, please get in touch and we will be happy to discuss your requirements.
As the name suggests, the embedded fin tube (G fin tube) is an extended surface fin tube where the fins are externally applied to the base tube. A groove is formed continuously on the base tube and the fin edge is inserted into the groove. After the fin is inserted, a set of rollers back-fills the groove, securely embedding the fin in the base tube.
The strength of the embedding — more commonly known as the fin-to-tube bond — is checked by hanging a 3 kg free weight on an isolated fin. This confirms whether the fin has been properly embedded into the base tube.
G fin tubes (embedded fin tubes) are made of two main components: the base tube and the fin strip material. We can supply G fin tubes in the following combinations:
- Base tube material: carbon steel, alloy steel, mild steel, stainless steel, and tubes manufactured by ERW or seamless processes.
- Fin material: aluminum or copper.
G fin tubes (embedded fin tubes) are mainly used in air fin coolers and many different types of air-cooled radiators. They are particularly suited to applications where the heat transfer temperature is in a slightly higher range, and where the working atmosphere is relatively less corrosive to the base tube.
Main industries served include process chemical plants, refineries, gas processing plants, steel plants, power plants, and fertilizer manufacturing plants.
We always put quality first for our customers, controlling quality from raw material inspection through production checking to water pressure testing and strength testing. Third-party inspection can also be authorized. Documentation includes:
- Incoming inspection report for bare tube and strip.
- Mill test certification for bare tube.
- Mill test certification for fin.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube