Stainless Steel Embedded Fin Tube with Threaded Connection and Polished Surface for Heat Exchanger Applications
Aluminum Embedded Fin Tube
,G Type Embedded Fin Tube
A high-performance KL-type finned tube engineered for superior heat transfer and durable fin-to-tube bonding in demanding industrial applications.
Dellok (YONGHUI Radiating Pipe Manufacturing Co., Ltd.) was established in 2002 and is located in Nanjing, China. In 2022, we joined HARBIN AIR CONDITIONING CO., LTD., becoming one of the most professional industry manufacturers in China.
After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff. Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines, including 1 imported McElroy production line from the United States
- Annual production capacity of 12 million meters and above
A finned tube is a tube with small fins around its outer surface. These fins act as a mechanism for transferring heat from the material inside the tube to or from the surrounding space. Finned tubes are used in applications where heat is transferred from a hot fluid to a cooler fluid through the tube wall.
The rate at which this heat transfer occurs depends on three factors:
- The difference in temperature between the two fluids
- The coefficient of heat transfer between each fluid and the wall
- The surface area of fluid exposure
Adopting the winding process, this type offers high production efficiency, uniform fin spacing, good heat transfer, and a high fin ratio, while protecting the base tube from air erosion. The aluminum or copper fin is folded into an L shape and continuously spirally wound on the outer surface of the base tube under tension.
- Maximum working temperature: 150°C (302°F)
- Corrosion resistance: Acceptable for atmospheric conditions
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
Building on the L-shaped foundation, the fin root completely covers the outer surface of the base tube, providing improved corrosion resistance to some extent.
- Maximum working temperature: 180°C (356°F)
- Corrosion resistance: Acceptable for atmospheric conditions
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
Before the fins are continuously wound onto the steel pipe surface, the outer surface of the base pipe undergoes a knurling process. After winding, the fin root attached to the steel pipe is also knurled to strengthen the bond between the steel pipe and the fins. This fin type delivers better heat transfer characteristics than L and LL types.
- Maximum working temperature: 260°C (500°F)
- Corrosion resistance: Acceptable for atmospheric conditions
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
| Fin Type | L / LL / KL Finned Tube |
|---|---|
| Tube Material | Carbon steel, stainless steel, copper, aluminum |
| Fin Material | Copper, aluminum |
| Fin Tube Length | No limit |
| Working Temperature | 230°C |
| Features | Winding process for high production efficiency; uniform fin spacing; excellent heat transfer; high fin ratio; base tube protected from air erosion |
Finned tubes are mainly used in air coolers across the petrochemical, electric power, paper making, tobacco, and building heating industries, as well as in air heaters and spray drying systems for food industry products such as vegetable protein and starch.
Additional applications include:
- Blast furnace and converter systems
- Power generation — condensate exhaust gas from steam turbines, condensate contact cycle cooling condensation, fossil and nuclear power plants
- Air conditioners (Freon, ammonia, propane)
- Waste incineration equipment
- Compressor coolers
We customize finned tubes according to each customer's individual requirements. For more details about L, LL, and KL finned tubes, please contact us.
A fin tube — whether baseboard or convector-style — is a heating element made of copper or steel for a piping system. It has square or spiral aluminum fins that radiate (distribute) heat and sit low to the floor. Fin tubes replaced radiators in the 1940s and 1950s and were popular before forced-air systems became common.
Finned tubes are used in applications involving the transfer of heat from a hot fluid to a colder fluid through a tube wall. The rate at which such heat transfer can occur depends on three factors: (1) the temperature difference between the two fluids; (2) the heat transfer coefficient between each fluid and the tube wall; and (3) the surface area to which each fluid is exposed.
In the case of bare (unfinned) tubes, where the outside surface area is not significantly greater than the inside surface area, the fluid with the lowest heat transfer coefficient dictates the overall heat transfer rate. When the heat transfer coefficient of the fluid inside the tube is several times larger than that of the fluid outside (for example, steam inside and oil outside), the overall heat transfer rate can be greatly improved by increasing the outside surface of the tube. In mathematical terms, the product of the outside fluid's heat transfer coefficient multiplied by the outside surface area is made to more closely match the product of the inside fluid's heat transfer coefficient multiplied by the inside surface area.
The whole concept of finned tubes is to increase the outside surface area of the tube. As an example, a finned tube configuration of 2" (nominal, 2.375" actual) pipe with a ¾" high welded helical solid fin of 12-gauge thickness and 6 fins per inch has an outside surface area of 8.23 sq. ft. per linear foot — whereas the same bare pipe has an outside surface area of only 0.62 sq. ft. per linear foot. That is a 13× increase in outside surface area.
By increasing the outside surface area of the tube, the overall heat transfer rate is increased, thereby reducing the total number of tubes required for a given application. This reduces overall equipment size and project cost. In many cases, one finned tube replaces six or more bare tubes at less than 1/3 the cost and 1/4 the volume.
Tension-wound fins are wrapped tightly around the tube and welded or stapled at the tube ends to hold their form. They can also be solder-coated to strengthen corrosion resistance. Tension-wound fins work especially well when the fins and tubes are made of the same material.
Our factory produces four types of tension-wound fin tubes:
- L finned tube
- LL finned tube
- KL finned tube
- Crimped finned tube
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube