Anodized Helical Extruded Fin Tube with A214 Carbon Steel Core for Condenser Heat Exchangers
Helical Condenser Extruded Fin Tube
,DELLOK A214 Extruded Fin Tube
The DELLOK A214 CS Helical Condenser Extruded Fin Tube is a bimetallic finned tube formed from an aluminium outer tube and an inner tube of almost any material. The fin is created by rolling material from the outside of the exterior tube, producing an integral fin with excellent heat transfer properties and longevity. Extruded fins offer excellent corrosion protection of the base tube, with a maximum operating temperature of 280°C.
- Fin Material: Aluminium
- Tube Materials: No theoretical limits
The fins are rotary cold rolled from a smooth, thick-walled hollow blank tube slid over the core tube. Three multi-spindle disc packs extrude the hollow blank tube into helical high fins. During this process, the inner diameter of the hollow blank tube is reduced and simultaneously pressed onto the core tube, resulting in a mechanically solid joint. Longitudinal slots are cut into the outer periphery with inclined fin tips.
- Fin Material: Aluminium
- Core Tube Material: Carbon Steel, Carbon Alloy Steel, Stainless Steel, Nickel Alloys, Copper, Copper Alloys, Titanium
- Relative thin wall core tubes can be used
- Excellent heat transfer performance (100% contact between tube and fin)
- Excellent atmospheric corrosion resistance (complete coverage of the core tube)
- Airtight fin-to-tube bond
- Robust fins resist mechanical damage
- Can be cleaned with high-pressure water or steam
- Fin Contact: Interference fit with mechanically solid pressed bond
- Maximum Tube Wall Operating Temperature: 300°C
- Type of Service: Medium temperature, severe atmospheric corrosive environment
The extruded fin is formed from an outer aluminum tube with a large wall thickness (muff), which is aligned over an inner base tube. The two tubes are pushed through three arbors with rotating discs that squeeze or extrude the aluminum fins up and out of the muff material in a spiral shape in one operation. The resultant fin typically has a base or root thickness of 0.035", an average fin thickness of 0.016", and a tip of 0.009", with an overall height of 16 mm (5/8"). The root thickness serves to form an uninterrupted bond over the entire tube length.
Murphy disc technology now makes it possible to fin a thinner muff, thus offering significant material savings. The recommended standard muff wall is 0.176" as opposed to the industry practice of 0.183"–0.210". In addition, the same growth factor can be used for pitches from 8 to 11 FPI, allowing for standardization on one muff thickness and eliminating the need to stock multiple muff wall thicknesses. The same discs can be used to produce 5/8" (15.9 mm) or 1/2" (12.7 mm) high fin.
Model B produces a 5/8" high fin on tube sizes from 25 mm to 1.5" (38.1 mm). The Model B Extruded Finning Machine is now capable of producing 7/16" high integral copper fin at 7 to 10 FPI within the tube size range of the machine (25 mm and 1.5"). Each machine is configured for the specific production requirements of the end user.
Extruded fin tubes are applied in the heat exchanger field, oil refineries, petrochemical industry, shipbuilding, power plant refrigeration, and more. All kinds of tube materials can be applied, and fin specifications can be changed according to client requirements.
- Air-cooled heat exchangers
- Condensers
- Air heaters in oil refineries
- Petrochemical industry applications
- Offshore and power plant installations
Applied Temperature: 285°C (545°F)
| Parameter | Metric | Imperial |
|---|---|---|
| Tube OD | 10–51 mm | 0.4"–2" |
| Tube Wall Thickness | 1.65–3.0 mm | 0.065"–0.118" |
| Tube Length | ≤18,500 mm | ≤60.7 ft |
| Fin Thickness | 0.3–1.2 mm | 0.012"–0.047" |
| Fin Height | 5–16 mm | 0.2"–0.63" |
| Fin Pitch | 100–555 mm | 3–14 FPI |
| Fin Type | Extruded | |
| Component | Material Options |
|---|---|
| Fin Material | Aluminum (most common grades: Alu. 1100, Alu. 1060, Alu. 6063); Copper |
| Tube Material | C.S. (most common grades: A179, A192, SA210 GrA1/C, A106 Gr B); S.S. (most common grades: TP304, 316, 321, 347, A789); Copper (most common grades: UNS12200, 14200, 70600, CuNi70/30, CuNi 90/10); Titanium (most common grade: B338Gr2) |
| Applied Temperature | 300°C |
| Type of Service | Medium temperature, severe atmospheric corrosive environment |
- Fin Type: Extruded Fin Tube
- Tube Material: Copper, copper nickel, stainless steel, titanium, etc.
- Fin Material: Copper, aluminum
Aluminum extruded finned tubes use the form of a base tube covered with an aluminum tube (the base tube can be carbon steel, stainless steel, or copper) through machine extrusion, forming a tube fin. The fin base and the tube outer wall are closely fitting, which gives the finned tube a high heat transfer coefficient and excellent heat transfer performance.
Aluminum extruded finned tubes, also called "integral finned tubes," can be made of iron, copper, or aluminum tube by compound rolling. They offer the advantages of tight bonding, small thermal resistance, good heat transfer performance, high strength, small flow loss, strong anti-corrosion performance, resistance to deformation under long-term hot and cold working conditions, and long working life.
The production process follows a rigorous sequence: pipeline → compressing or rolling → strip peeling → washing → pressure test → blast blowing → packaging.
The extruded fin tube is formed by a bimetallic tube consisting of an aluminum outer tube and an inner tube of almost any material. The fin is formed by rolling the material from the outside of the outer tube to provide an integrated fin with excellent heat transfer performance and service life. The extruded fins provide excellent corrosion protection for the base tube.
The production method of the composite finned tube mainly includes the extrusion method: the bimetallic composite tube is lined with a mandrel, and driven by the rotation of the roller blade, the composite tube is processed on the outer surface through the cavity formed by the rolling groove and the core head to produce fins. The heat transfer tube produced by this method is an organic whole with its outer tube and fins, so there is no contact heat loss, and it has good performance and high heat transfer efficiency.
A fin tube is a tube that has small fins around the outside surface. These fins act as a filter and a mechanism to transfer heat from the material inside the tube to the outside space or vice versa. Fin tubes are used in applications that require a transfer of heat from a hot fluid to a colder fluid through the tube's wall. The rate at which such heat transfer occurs depends on three factors: the temperature difference between the two fluids, the heat transfer coefficient between each of the fluids and the tube wall, and the surface area to which the fluid is exposed.
Finned tube heat exchangers generally use air to cool or heat fluids such as air, water, oil, or gas, or they can be used to capture or recover waste heat. These heat exchangers can be used in a broad range of industries including oil & gas, power generation, marine, and HVAC&R.
Extruded finned tubes are bimetallic tubes whose outer aluminium surface is finned by cold plastic deformation. There are two major types of finned tubes available: single metal tubes (also called mono-metallic fin tubes) and bimetallic tubes (composite extruded fin tubes).
Good corrosion resistance, formability, and high thermal conductivity make aluminium an ideal material for the construction of these heat exchangers. A typical brazed heat exchanger (radiator or condenser) comprises fins, tubes, sideplates, and headerplates.
Extruded fin tubes are widely used in the refinery, petrochemical, and chemical industries for air-cooled condensers, air-cooled coolers for products, gas coolers, and gas heaters.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After many years of development, the company now has 66 million yuan in fixed assets, more than 200 employees, and 33 technical staff. We have 4 aluminum processing production lines with an annual processing capacity of more than 20,000 tons; 5 tube-drawing production lines; 47 fin tube production lines; and 1 imported production line from the American brand McElroy, with an annual production capacity of 12 million meters or more.
Quality is the eternal pursuit of our company. Meticulous work, a standardized management system, and systematic quality assurance are Dellok (YONGHUI)'s best commitment to quality. In Dellok (YONGHUI), quality control is not only the detection of the final process but extends throughout the entire production process. We implement a comprehensive set of quality control and assurance systems. Each batch of pipes is sampled and tested, and records are kept as a quality guarantee for the final product.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube