Anodizing Louver Fins Extruded Finned Tube with 2.5mm Fin Height for Air-cooled Condensers
DELLOK Al 1060 Extruded Finned Tube
,Air-cooled Condensers Extruded Finned Tube
DELLOK Al 1060 extruded finned tubes are bimetallic heat transfer tubes engineered for air-cooled condensers and other demanding thermal applications. An aluminum outer sleeve is cold-extruded onto a base tube of carbon steel, stainless steel, copper, or titanium, producing an integral helical fin with an exceptionally tight fin-to-tube bond. The result is high heat transfer efficiency, strong mechanical resistance, and reliable long-term performance in medium-temperature and corrosive environments.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets and employs more than 200 people, including 33 technical staff.
Our production infrastructure includes 4 aluminum processing lines with an annual capacity exceeding 20,000 tons, 5 tube-drawing lines, and 47 fin tube production lines — among them an imported McElroy line from the United States — delivering an annual fin tube capacity of more than 12 million meters.
Quality is our enduring pursuit. Meticulous workmanship, a standardized management system, and systematic quality assurance are DELLOK's commitment to every customer. Quality control is not limited to final inspection; it runs throughout the entire production process. Each batch of tubes is sampled, tested, and recorded as a guarantee of final product quality.
Extruded fin tubes feature a "double-wall" construction that makes them extremely durable and heat-efficient. Unlike fins embedded in the exterior wall of a tube, our extruded fin tubes are designed to prevent corrosion between the fin and the tube. When used properly, they are fully suitable for steam coils.
Extruded fin tubes are manufactured through a rotary extrusion process to obtain integral fins. A lining is inserted into an aluminum extrusion, which is then radially crushed onto the lining while excess material is pushed into the shape of spiral fins. This process solidifies the fins and prevents the galvanic corrosion that occurs when two metal alloys are exposed to air — a common issue with other fin types. Compared with similar products, our fins do not break or uncoil, and the lining does not come loose, preserving the heat exchanger's thermal performance.
Fins are rotary cold-rolled from a smooth, thick-walled hollow blank tube slid over the core tube. Three multi-spindle disc packs extrude the hollow blank into helical high fins. During this process, the inner diameter of the hollow blank is reduced and simultaneously pressed onto the core tube, creating a mechanically solid joint. Longitudinal slots are cut into the outer periphery with inclined fin tips.
- Fin material: Aluminum
- Core tube material: Carbon steel, carbon alloy steel, stainless steel, nickel alloys, copper, copper alloys, or titanium
The bonding of the outer and inner tubes removes the risk of contact loss with the aluminum due to thermal stress. Maximum operating temperature is 250°C, and the heat transfer coefficient remains steady. Because the outer sleeve is continuous, no electrolytic couple is created.
The fins are more rigid and withstand handling shocks better than type "G" and "L" fin tubes.
- Manufacturing process: Cold extrusion
- Fin-to-tube bond: Excellent
- Heat transfer efficiency: Excellent
- Mechanical resistance: Excellent — unlike other fin tubes, it can be cleaned frequently with high-pressure jets, reducing downtime and extending service life
- Corrosion protection: Excellent, because the aluminum fully covers the base tube (except bare ends)
- Temperature range: Up to 300°C
These fin tubes are used in air fin coolers, driers, radiators, and similar equipment. They are preferred across industries including food and agriculture, power plants, chemical processing, steel plants, and chiller plants.
| Tube OD | 10–51 mm | 0.4"–2" |
|---|---|---|
| Tube Wall Thickness | 1.65–3.0 mm | 0.065"–0.118" |
| Tube Length | ≤ 18,500 mm | ≤ 60.7 ft |
| Fin Thickness | 0.3–1.2 mm | 0.012"–0.047" |
| Fin Height | 5–16 mm | 0.2"–0.63" |
| Fin Pitch | 100–555 mm | 3–14 FPI |
| Fin Type | Extruded | |
| Fin Material | Aluminum (most common grades: Alu. 1100, Alu. 1060, Alu. 6063); Copper |
|---|---|
| Tube Material |
C.S. (most common grades: A179, A192, SA210 GrA1/C, A106 Gr B) S.S. (most common grades: TP304, 316, 321, 347, A789) Copper (most common grades: UNS12200, 14200, 70600, CuNi 70/30, CuNi 90/10) Titanium (most common grade: B338 Gr2) |
| Applied Temperature | 300°C |
| Type of Service | Medium temperature, severe atmospheric corrosive environments |
- Fin type: Extruded fin tube
- Tube material: Copper, copper nickel, stainless steel, titanium, and more
- Fin material: Copper, aluminum
Aluminum extruded finned tubes are formed by covering the base tube (carbon steel, stainless steel, or copper) with an aluminum tube and extruding it by machine to create a tube fin. The fin base fits tightly against the tube's outer wall, giving the finned tube a high heat transfer coefficient and strong thermal performance.
Also called integral finned tubes, aluminum extruded finned tubes can be produced from iron, copper, or aluminum tubes by compound rolling. They offer tight bonding, low thermal resistance, good heat transfer performance, high strength, low flow loss, strong corrosion resistance, resistance to deformation under long-term hot and cold working conditions, and a long service life.
Production flow: pipe line → compressing or rolling → strip peeling → washing → pressure test → blast blowing → packaging.
The extruded fin tube is formed from a bimetallic tube consisting of an aluminum outer tube and an inner tube of almost any material. The fin is created by rolling material from the outside of the outer tube to provide an integrated fin with excellent heat transfer performance and service life. The extruded fins also provide excellent corrosion protection for the base tube.
The primary production method for composite finned tubes is extrusion: the bimetallic composite tube is lined with a mandrel and, driven by the rotation of the roller blade, the composite tube's outer surface is processed through the cavity formed by the rolling groove and core head to produce fins. The heat transfer tube made by this method is an organic whole with its outer tube and fins, so there is no contact heat loss — resulting in good performance and high heat transfer efficiency.
A fin tube is a tube with small fins around its outside surface. These fins act as a filter and as a mechanism to transfer heat from the material inside the tube to the outside space, or vice versa. Fin tubes are used in applications requiring heat transfer from a hot fluid to a colder fluid through the tube wall. The rate of heat transfer depends on three factors:
- The temperature difference between the two fluids
- The heat transfer coefficient between each fluid and the tube wall
- The surface area to which the fluid is exposed
Finned tube heat exchangers generally use air to cool or heat fluids such as air, water, oil, or gas, or they can capture or recover waste heat. They are used across a broad range of industries, including oil and gas, power generation, marine, and HVAC&R.
Extruded finned tubes are bimetallic tubes whose outer aluminum surface is finned by cold plastic deformation. Two major types are available: single-metal tubes (mono-metallic fin tubes) and bimetallic tubes (composite extruded fin tubes).
Good corrosion resistance, formability, and high thermal conductivity make aluminum an ideal material for these heat exchangers. A typical brazed heat exchanger (radiator or condenser) comprises fins, tubes, side plates, and header plates.
Extruded fin tubes are widely used in the refinery, petrochemical, and chemical industries for:
- Air-cooled condensers
- Air-cooled coolers for products
- Gas coolers
- Gas heaters
We adhere to an in-house Quality System (QMS) based on industry standards such as ASME and the National Board of Boilers & Pressure Vessels, along with customer requirements. Our quality system is documented, audited, and enforced by our Quality Control department.
Extruded Finned Tube
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube