SA179 AL1060 Extruded Fin Tube Bimetallic Extruded Finned Tube for Heat Exchanger
AL1060 Extruded Bimetallic Fin Tube
,Heat Exchanger Extruded Bimetallic Fin Tube
The DELLOK SA179 AL1060 Extruded Bimetallic Fin Tube is engineered for high-efficiency heat transfer in demanding industrial environments. Combining an aluminum outer sleeve with a base tube of carbon steel, stainless steel, copper, or titanium, this bimetallic construction delivers a 100% fin-to-tube bond, exceptional corrosion protection, and long service life in medium-temperature and severely corrosive atmospheres.
Established in 2002 and located in Jiangsu, China, DELLOK has grown into a leading manufacturer with 66 million yuan in fixed assets, more than 200 employees, and 33 technical specialists. Our production infrastructure includes:
- 4 aluminum processing lines with an annual capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported McElroy production line from the United States
- Annual fin tube production capacity exceeding 12 million meters
Quality is our eternal pursuit. Our meticulous production workshop, standardized management system, and systematic quality assurance reflect DELLOK's commitment to excellence. Quality control is not limited to final inspection — it is integrated throughout the entire production process. Each batch of pipes is sampled, tested, and recorded as a quality guarantee for the final product.
This fin type is formed from a bimetallic tube consisting of an aluminum outer tube and an inner tube of almost any material. The fin is created by rolling material from the outside of the exterior tube to produce an integral fin with excellent heat transfer properties and longevity. Extruded fins offer outstanding corrosion protection for the base tube and virtually eliminate exposure to outside fluids.
A polished and deoiled base tube is set inside an aluminum sleeve. The assembly passes through a fin machine consisting of three spindles set at 120° each, bearing a stack of plates. These plates — stacked in form and diameter — first build the fin, then bond the outer and inner tubes together. In certain cases (such as high air speed applications), the fins are serrated after the fin process to increase the heat transfer coefficient.
- 100% fin-to-tube bond providing exceptional efficiency and longevity
- Excellent corrosion protection on the base tube
- Easy to clean with a high-pressure water jet without deforming the fins
- Continuous outer sleeve eliminates galvanic corrosion between the tube and fins
- Bonding of outer and inner tubes removes the risk of contact loss with the aluminum due to thermal stress; fins are vibration resistant
- Higher heat transfer performance for the life of the unit
- Commonly used in applications with temperatures up to 325 °C
- Max. Working Temperature: 300 °C
- Atmospheric Corrosion Resistance: OK
- Mechanical Resistance: Poor
- Fin Material: Copper, Aluminum
- Base Tube Materials: Any available material, including carbon steel (A179, A192, A210), stainless steel (A269/A213 T5, T11, T22, 304, 316)
Extruded fin tubes are widely used in the refinery, petrochemical, and chemical industries for:
- Air-cooled condensers
- Air-cooled coolers for products
- Gas coolers
- Gas heaters
| Product Specification | ||
|---|---|---|
| Tube OD | 10~51 (mm) | 0.4"~2" |
| Tube Wall Thk | 1.65~3.0 (mm) | 0.065"~0.118" |
| Tube Length | ≤18,500 (mm) | ≤60.7 ft |
| Fin Thk | 0.3~1.2 (mm) | 0.012"~0.047" |
| Fin Height | 5~16 (mm) | 0.2"~0.63" |
| Fin Pitch | 100~555 (mm) | 3~14 FPI |
| Fin Type | Extruded | |
| Material Combinations | ||
| Fin Material | Aluminum (most common grades: Alu. 1100, Alu. 1060, Alu. 6063); Copper | |
| Tube Material | C.S. (most common grades: A179, A192, SA210 GrA1/C, A106 Gr B); S.S. (most common grades: TP304, 316, 321, 347, A789); Copper (most common grades: UNS12200, 14200, 70600, CuNi70/30, CuNi 90/10); Titanium (most common grade: B338Gr2) | |
| Applied Temperature | 300 °C | |
| Type of Service | Medium temperature, severe atmospheric corrosive environment | |
- Fin Type: Extruded Fin Tube
- Tube Material: Copper, copper nickel, stainless steel, titanium, etc.
- Fin Material: Copper, aluminum
Aluminum extruded finned tubes use a base tube covered with an aluminum tube (the base tube may be carbon steel, stainless steel, or copper). Through machine extrusion, a tube fin is formed with the fin base and tube outer wall tightly fitted. This fin tube construction achieves a high heat transfer coefficient and superior heat transfer performance.
Also called "integral finned tubes," aluminum extruded finned tubes can be made from iron, copper, or aluminum tube by compound rolling. They offer tight bonding, low thermal resistance, good heat transfer performance, high strength, minimal flow loss, strong anti-corrosion performance, resistance to deformation under long-term hot and cold working conditions, and a long working life.
The production sequence is as follows: pipe line → compressing or rolling → strip peeling → washing → pressure test → blast blowing → packaging.
The extruded fin tube is formed from a bimetallic tube consisting of an aluminum outer tube and an inner tube of almost any material. The fin is created by rolling the material from the outside of the outer tube to provide an integrated fin with excellent heat transfer performance and service life. The extruded fins provide excellent corrosion protection for the base tube.
The composite finned tube production method primarily uses extrusion: the bimetallic composite tube is lined with a mandrel and driven by the rotation of the roller blade. The composite tube is processed on the outer surface through the cavity formed by the rolling groove and the core head to produce fins. The heat transfer tube produced by this method is an organic whole with its outer tube and fins, eliminating contact heat loss and delivering high heat transfer efficiency.
A fin tube is a tube with small fins around its outside surface. These fins act as a filter and a mechanism to transfer heat from the material inside the tube to the outside space, or vice versa. Fin tubes are used in applications requiring heat transfer from a hot fluid to a colder fluid through the tube wall. The rate of heat transfer depends on three factors:
- The temperature difference between the two fluids
- The heat transfer coefficient between each fluid and the tube wall
- The surface area to which the fluid is exposed
Finned tube heat exchangers generally use air to cool or heat fluids such as air, water, oil, or gas, or they can capture or recover waste heat. These heat exchangers are used in a broad range of industries, including oil & gas, power generation, marine, and HVAC&R.
Extruded finned tubes are bimetallic tubes whose outer aluminum surface is finned by cold plastic deformation. Two major types are available: single metal tubes (mono-metallic fin tubes) and bimetallic tubes (composite extruded fin tubes).
Product Categories: Extruded Finned Tube
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube