EN 10217-7 1.4302 AL Extruded Fin Tube and Extruded Aluminum Tube for Heat Exchanger
AL Extruded Aluminum Tube
,EN 10217-7 Extruded Aluminum Tube
The DELLOK EN 10217-7 1.4302 AL Extruded Aluminum Tube is an extruded-type finned tube manufactured by roll forming the outer surface of a soft seamless plain tube. Unlike HF welding or wrapping methods, the extrusion process squeezes the tube wall into straight fins, making the fin and tube an integrated, inseparable structure. This eliminates heat resistance between fin and tube and optimizes heat exchange efficiency, allowing the product to withstand more severe working conditions than other finned tube types.
DELLOK (Yonghui Radiating Pipe Manufacturing Co., Ltd.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff.
Our production capabilities include 4 aluminum processing lines with an annual processing capacity exceeding 20,000 tons, 5 tube-drawing lines, 47 fin tube production lines, and 1 imported production line from the American brand McElroy, with an annual production capacity of over 12 million meters.
Quality is our eternal pursuit. Our production workshop, meticulous workmanship, standardized management system, and systematic quality assurance represent Dellok (Yonghui)'s strongest commitment to quality. Quality control is not limited to final inspection — it runs throughout the entire production process. Each batch of pipes is sampled and tested, and records are retained as a quality guarantee for the final product.
The finned tubes we supply are of the extruded type, which differs from those produced through HF welding and wrapping methods. The fins are obtained by roll forming the outer surface of a soft seamless plain tube. This technology simply squeezes the wall thickness, transforming it into straight fins on the tube. As a result, the fin and tube are integrated and inseparable, avoiding heat resistance between fin and tube and optimizing heat exchange efficiency.
Based on this structure, the extruded type can survive more severe working conditions than other finned tubes. It also offers several unique features, including enhanced physical structure, resistance to vibration, anti-corrosion ability, and long service life.
Under this technology, two major types of finned tubes are available: single metal tubes and bimetallic tubes. Single metal tubes use copper, aluminum, or copper-nickel alone. Bimetallic tubes feature a core tube on the inside made of a harder material, with the outer tube rolled onto the core tube to provide a tight bond and good thermal contact between the two tubes.
Customized finned tubes are available. The specification table is provided below. If required, the fin tube can be made into various forms after the soft annealing process. These tubes are suitable for cooling and heating across a wide range of conditions — for example, coils in water heaters, oil coolers in large machines, heat transfer parts in boilers and heat recovery systems, and condenser or evaporator parts in the air-conditioning and refrigeration industry.
The materials for our fin tubes cover Copper (C10200, C12000, C12200), Copper Nickel (C70600), Aluminum (1060), Aluminum alloy, Aluminum-Steel (bimetallic), Aluminum-Stainless Steel (bimetallic), Aluminum-Copper (bimetallic), Aluminum-Copper Nickel (bimetallic), and Copper-Copper Nickel (bimetallic).
- Optimized inner-to-outer surface ratio
- High heat exchange rate
- Enhanced structure due to the roll forming process
- Flexible as straight tube, bent, or coiled heat exchangers
- Low heat resistance between fins and tube
- Strong resistance to shock and thermal expansion and contraction
- Cost and energy saving due to long service life and high exchange rate
Customized specifications are available upon request. Please contact us with your required dimensions and material combinations.
Our fin tubes are mainly used in the following fields:
- Heating: gas-fired boilers, condensing boilers, flue gas condensers
- Mechanical and automotive engineering: oil coolers, mine coolers, air coolers for diesel engines
- Chemical engineering: gas coolers and heaters, process coolers
- Power plants: air coolers, cooling towers
- Nuclear engineering: uranium enrichment plants
A: Generally, samples require 1–3 days, and mass production requires 15–30 days, depending on your request.
A: We provide a one-year warranty for our products.
A: Trade assurance, TT, and Western Union.
A: Air freight, sea freight, express delivery, and others. We will choose the most suitable transportation method according to your requirements.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube