Aluminium Fin Copper Cooling Tube Extruded Fin Tube for Radiator Heat Exchanger
Aluminium Fin Copper Cooling Tube
,Copper Cooling Tube For Radiator
DELLOK aluminium fin copper cooling tubes are bimetallic extruded fin tubes engineered for radiators and other high-efficiency heat transfer applications. An aluminium outer sleeve is cold-rolled into helical fins directly onto a copper (or other) base tube, producing a continuous, mechanically solid bond with no contact resistance. The result is a durable, corrosion-resistant tube with excellent heat transfer performance across the full service life of the unit.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff.
Our production capabilities include:
- 4 aluminium processing lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines, including 1 imported McElroy production line from the United States
- Annual fin tube production capacity of more than 12 million meters
Quality is our eternal pursuit. Meticulous workmanship, a standardized management system, and systematic quality assurance are DELLOK's commitment to every customer. Quality control is not limited to final inspection — it runs throughout the entire production process. Each batch of pipes is sampled, tested, and recorded as a quality guarantee for the finished product.
The extruded fin is formed from an outer aluminium tube with a large wall thickness (muff), aligned over an inner base tube. Both tubes are pushed through three arbors with rotating discs that squeeze (extrude) the aluminium fins up and out of the muff material in a spiral shape in a single operation. The resulting fin typically has a base (root) thickness of 0.035", an average fin thickness of 0.016", and a tip of 0.009", with an overall height of 16 mm (5/8"). The root thickness forms an uninterrupted bond over the entire tube length.
Murphy disc technology now makes it possible to fin a thinner muff, offering significant material savings. The recommended standard muff wall is 0.176" versus the industry practice of 0.183"–0.210". In addition, the same growth factor can be used for pitches from 8 to 11 FPI, allowing standardization on a single muff thickness and eliminating the need to stock multiple muff wall thicknesses. The same discs can produce 5/8" (15.9 mm) or 1/2" (12.7 mm) high fins.
Model B produces a 5/8" high fin on tube sizes from 25 mm to 1.5" (38.1 mm). The Model B Extruded Finning Machine is now capable of producing 7/16" high integral copper fin at 7 to 10 FPI within the machine's tube size range (25 mm to 1.5"). Each machine is configured to the specific production requirements of the end user.
Bimetallic extruded fin tube uses a base tube inserted into an aluminium tube, with the aluminium directly extruded into the desired fin specification. The fin and tube surfaces are in tight contact, improving heat transfer efficiency and providing considerable corrosion protection to the base tube.
The fins are rotary cold-rolled from a smooth, thick-walled hollow blank tube slid over the core tube. Three multi-spindle disc packs extrude the hollow blank tube into helical high fins. During this process, the inner diameter of the hollow blank tube is reduced and simultaneously pressed onto the core tube, resulting in a mechanically solid joint.
- Fin material: Aluminium / Copper
- Core tube material: Carbon steel, carbon alloy steel, stainless steel, nickel alloys, copper, copper alloys, titanium
- 100% fin-to-tube bond providing exceptional efficiency and longevity
- Excellent corrosion protection on the base tube
- Easy to clean with a high-pressure water jet without deforming the fins
- Continuous outer sleeve eliminates galvanic corrosion between the tube and fins
- Bonding of the outer and inner tubes removes the risk of contact loss with the aluminium due to thermal stress; fins are vibration resistant
- Higher heat transfer performance for the life of the unit
- Commonly used in applications with temperatures up to 325 °C
Primary extruded finned tubes are used in high-temperature and corrosive atmospheric conditions, such as operating temperatures below 300 °C or offshore applications. Typical uses include heat pipes, air-to-air heat exchangers for HVAC applications, air dehumidification in air treatment plants, and energy recovery in air exhaust systems.
This fin design is the least economical compared with other fin types, mainly due to the increased amount of aluminium used (around 40%) and the additional labour required during manufacturing. However, this increased cost can be offset by using a lower-grade parent tube material.
| Parameter | Metric | Imperial |
|---|---|---|
| Tube OD | 10–51 mm | 0.4"–2" |
| Tube Wall Thickness | 1.65–3.0 mm | 0.065"–0.118" |
| Tube Length | ≤ 18,500 mm | ≤ 60.7 ft |
| Fin Thickness | 0.3–1.2 mm | 0.012"–0.047" |
| Fin Height | 5–16 mm | 0.2"–0.63" |
| Fin Pitch | 100–555 mm | 3–14 FPI |
| Fin Type | Extruded | |
| Fin Material | Aluminium (most common grades: Alu. 1100, Alu. 1060, Alu. 6063); Copper | |
| Tube Material | C.S. (most common grades: A179, A192, SA210 GrA1/C, A106 Gr B); S.S. (most common grades: TP304, 316, 321, 347, A789); Copper (most common grades: UNS12200, 14200, 70600, CuNi 70/30, CuNi 90/10); Titanium (most common grade: B338 Gr2) | |
| Applied Temperature | 300 °C | |
| Type of Service | Medium temperature, severe atmospheric corrosive environment | |
- Fin type: Extruded fin tube
- Tube material: Copper, copper nickel, stainless steel, titanium, and more
- Fin material: Copper, aluminium
Aluminium extruded finned tubes use a base tube covered with an aluminium tube (the base tube may be carbon steel, stainless steel, or copper) that is machine-extruded to form a tube fin. The fin base and the tube outer wall fit closely together, allowing the finned tube to achieve a high heat transfer coefficient and strong heat transfer performance.
Also called "integral finned tubes," extruded finned tubes can be made from iron, copper, or aluminium tube by compound rolling. They offer tight bonding, low thermal resistance, good heat transfer performance, high strength, low flow loss, strong anti-corrosion performance, resistance to deformation under long-term hot and cold working conditions, and a long working life.
The production flow is: pipe line → compressing or rolling → strip peeling → washing → pressure test → blast blowing → packaging.
The extruded fin tube is formed from a bimetallic tube consisting of an aluminium outer tube and an inner tube of almost any material. The fin is created by rolling the material from the outside of the outer tube to provide an integrated fin with excellent heat transfer performance and service life. Extruded fins also provide excellent corrosion protection for the base tube.
The main production method for composite finned tubes is the extrusion method: the bimetallic composite tube is lined with a mandrel and, driven by the rotation of the roller blade, the composite tube's outer surface is processed through the cavity formed by the rolling groove and core head to produce fins. The heat transfer tube produced this way is an organic whole with its outer tube and fins, so there is no contact heat loss, giving good performance and high heat transfer efficiency.
A fin tube is a tube with small fins around its outside surface. These fins act as a mechanism to transfer heat from the material inside the tube to the outside space, or vice versa. Fin tubes are used in applications that require heat transfer from a hot fluid to a colder fluid through the tube wall. The rate of heat transfer depends on three factors: the temperature difference between the two fluids, the heat transfer coefficient between each fluid and the tube wall, and the surface area exposed to the fluid.
Finned tube heat exchangers generally use air to cool or heat fluids such as air, water, oil, or gas, or they can capture or recover waste heat. They are used across a broad range of industries, including oil & gas, power generation, marine, and HVAC&R.
Extruded finned tubes are bimetallic tubes whose outer aluminium surface is finned by cold plastic deformation. Two major types are available: single-metal tubes (mono-metallic fin tubes) and bimetallic tubes (composite extruded fin tubes).
Good corrosion resistance, formability, and high thermal conductivity make aluminium an ideal material for heat exchanger construction. A typical brazed heat exchanger (radiator or condenser) comprises fins, tubes, side plates, and header plates.
Product Category: Extruded Finned Tube
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube