Serrated Extruded Fin Tube A106 Gr.B Corrosion Resistant Heat Exchanger Fin Tube
Aluminium Extruded Fin Tube
,Finned Aluminum Extrusion Tube
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff. Our facilities include 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons, 5 tube-drawing production lines, 47 fin tube production lines, and 1 imported production line from the American brand McElroy — together delivering an annual production capacity of over 12 million meters.
Quality is our eternal pursuit. Meticulous workmanship, a standardized management system, and systematic quality assurance are Dellok (YONGHUI)'s best commitment to quality. Quality control is not limited to final inspection — it runs throughout the entire production process. We implement a comprehensive quality control and assurance system: each batch of pipes is sampled and tested, and records are retained as a quality guarantee for the final product.
Extruded fin tubes are available in a wide range of standard and special sizes. As an internationally advanced heat transfer element, extruded fin tubes offer high efficiency, strong corrosion resistance, and long service life.
The base tube (core tube) of double extruded fin tubes can be made from stainless steel, carbon steel, corrosion-resistant steel, copper and copper alloys, titanium and titanium alloys, and other materials. The base tube of single extruded fin tubes can be made from copper, nickel-copper, aluminum, and other materials.
A polished and deoiled base tube is set inside an aluminum sleeve. The assembly passes through the fin machine, which consists of three spindles set at 120° each, bearing a stack of plates. These plates — stacked in form and diameter — first build the fin, then bond the outer and inner tubes together. In certain cases (high air speed), the fins are serrated after the fin process to increase the heat transfer coefficient.
The bonding of the outer and inner tubes removes the risk of losing contact with the aluminum due to thermal stress. Maximum operating temperature is 250°C, and the heat transfer coefficient remains steady. Additionally, because the outer sleeve is continuous, no electrolytic couple is created.
The fins are more rigid and withstand handling shocks better compared to type "G" and "L" fin tubes.
- Manufacturing Process: Cold extrusion
- Fin-to-Tube Bond: Excellent
- Heat Transfer Efficiency: Excellent
- Mechanical Resistance: Excellent — unlike other fin tubes, it can be cleaned frequently with high-pressure jets, reducing downtime and extending total service life
- Corrosion Protection: Excellent — the aluminum sleeve completely covers the base tube (except bare ends)
- Temperature Range: Up to 300°C
Primary extruded finned tubes are used in high-temperature and corrosive atmospheric conditions, such as operating temperatures below 300°C or offshore applications. Typical uses include heat pipes, air-to-air heat exchangers for HVAC applications, air dehumidification in air treatment plants, and energy recovery in air exhaust systems.
This fin design is the least economical compared to other fin types, mainly due to the increased amount of aluminum used (around 40% more) and the additional labor required during manufacturing. However, this increased cost can be offset by using a lower-grade parent tube material.
Aluminum extruded finned tubes are produced by covering the base tube (which may be carbon steel, stainless steel, or copper) with an aluminum tube and extruding it through a machine to form a tube fin. The fin base and the tube outer wall fit closely together, giving the finned tube a high heat transfer coefficient and excellent heat transfer performance.
Also called integral finned tubes, aluminum extruded finned tubes can be made from iron, copper, or aluminum tube by compound rolling. This construction offers tight bonding, low thermal resistance, good heat transfer performance, high strength, low flow loss, strong anti-corrosion performance, resistance to deformation under long-term hot and cold working conditions, and a long working life.
For more information, see Extruded Finned Tube.
The production sequence is: pipe line → compressing or rolling → strip peeling → washing → pressure test → blast blowing → packaging.
The extruded fin tube is formed from a bimetallic tube consisting of an aluminum outer tube and an inner tube of almost any material. The fin is created by rolling the material from the outside of the outer tube, producing an integrated fin with excellent heat transfer performance and service life. The extruded fins provide excellent corrosion protection for the base tube.
The composite finned tube is produced mainly by the extrusion method: the bimetallic composite tube is lined with a mandrel and, driven by the rotation of the roller blade, the composite tube's outer surface is processed through the cavity formed by the rolling groove and the core head to produce the fins. The heat transfer tube produced by this method is an organic whole with its outer tube and fins, so there is no contact heat loss — resulting in good performance and high heat transfer efficiency.
A: Generally, samples take 1–3 days and mass production takes 15–30 days, depending on your request.
A: We provide a one-year warranty for our products.
A: Trade assurance, TT, and Western Union.
A: Air freight, sea freight, express delivery, and more. We will choose the most suitable transportation method according to your requirements.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube