Heat Cooler Copper Extruded Fin Tube Corrosion Resistant Extruded Finned Tube for Heat Exchanger
Aluminium Extruded Fin Tube
,Finned Aluminum Extrusion Tube
DELLOK Heat Cooler Extruded Copper Fin Tube is a high-efficiency, bimetallic heat transfer element manufactured through a cold extrusion process. An aluminum outer sleeve is mechanically bonded to a base tube (copper, copper alloy, steel, stainless steel, or titanium), producing an integrated fin with excellent thermal performance, strong corrosion resistance, and a long service life. This construction represents an internationally advanced heat transfer solution for demanding industrial applications.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets and employs more than 200 people, including 33 technical staff.
Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines, including 1 imported line from the American brand McElroy
- Annual fin tube production capacity of 12 million meters and above
Quality is our eternal pursuit. Our production workshop, meticulous workmanship, standardized management system, and systematic quality assurance represent DELLOK (YONGHUI)'s strongest commitment to quality. Quality control is not limited to final inspection — it runs throughout the entire production process. We implement a comprehensive quality control and assurance system in which each batch of pipes is sampled, tested, and recorded as a guarantee for the final product.
Extruded fin tubes are available in a wide range of standard and special sizes. They offer the advantages of high efficiency, strong corrosion resistance, and long life as an internationally advanced heat transfer element.
The base tube (core tube) of double extruded fin tubes can be made of stainless steel, carbon steel, corrosion-resistant steel, copper and copper alloys, titanium and titanium alloys, and other materials. The base tube of single extruded fin tubes can be made of copper, nickel-copper, aluminum, and other materials.
A polished and deoiled base tube is set inside an aluminum sleeve. The assembly passes through a fin machine consisting of three spindles set at 120° to each other, each bearing a stack of plates. These plates — stacked in from and diameter — first build the fin and then bond the outer and inner tubes together. In certain cases (such as high air speed applications), the fins are serrated after the fin process to increase the heat transfer coefficient.
The bonding of the outer and inner tubes removes the risk of contact loss with the aluminum due to thermal stress. The maximum operating temperature is 250°C, and the heat transfer coefficient remains steady. Additionally, because the outer sleeve is continuous, no electrolytic couple is created.
The fins are more rigid and withstand handling shocks better than type "G" and "L" fin tubes.
- Manufacturing process: Cold extrusion
- Fin-to-tube bond: Excellent
- Heat transfer efficiency: Excellent
- Mechanical resistance: Excellent — unlike other fin tubes, it can be cleaned frequently with high-pressure jets, reducing downtime and extending total service life
- Corrosion protection: Excellent, because the aluminum sleeve completely covers the base tube (except bare ends)
- Temperature range: Up to 300°C
Primary extruded finned tubes are used in high-temperature and corrosive atmospheric conditions, such as operating temperatures below 300°C or offshore applications. Typical uses include heat pipes, air-to-air heat exchangers for HVAC applications, air dehumidification in air treatment plants, and energy recovery in air exhaust systems.
This fin design is the least economical compared with other fin types, mainly due to the increased aluminum consumption (around 40% more) and additional labor during manufacturing. However, this increased cost can be offset by using a lower-grade parent tube material.
Aluminum extruded finned tubes use a base tube (carbon steel, stainless steel, or copper) covered with an aluminum tube, formed through machine extrusion into a tube fin. The fin base and the tube outer wall fit closely together, giving the finned tube a high heat transfer coefficient and excellent heat transfer performance.
Also called "integral finned tubes," aluminum extruded finned tubes can be made of iron, copper, or aluminum tube by compound rolling. They offer tight bonding, low thermal resistance, good heat transfer performance, high strength, low flow loss, strong anti-corrosion performance, resistance to deformation under long-term hot and cold working conditions, and a long working life. Learn more about Extruded Finned Tube.
The production flow is as follows:
- Pipe line preparation
- Compressing or rolling
- Strip peeling
- Washing
- Pressure test
- Blast blowing
- Packaging
The extruded fin tube is formed from a bimetallic tube consisting of an aluminum outer tube and an inner tube of almost any material. The fin is created by rolling the material from the outside of the outer tube, producing an integrated fin with excellent heat transfer performance and service life. The extruded fins provide excellent corrosion protection for the base tube.
The main production method for composite finned tubes is the extrusion method: the bimetallic composite tube is lined with a mandrel and driven by the rotation of the roller blade. The composite tube is processed on its outer surface through the cavity formed by the rolling groove and the core head to produce the fins. The heat transfer tube produced by this method is an organic whole with its outer tube and fins, so there is no contact heat loss, resulting in good performance and high heat transfer efficiency.
Q: What is your lead time for production?
A: Generally, samples take 1–3 days, and mass production takes 15–30 days, depending on your request.
Q: What is the warranty for your products?
A: We provide a one-year warranty for our products.
Q: What payment terms do you accept?
A: Trade assurance, TT (telegraphic transfer), and Western Union.
Q: What are the modes of transportation for the machines?
A: Air freight, sea freight, express delivery, and others. We will choose the most suitable transportation method according to your requirements.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube