Copper Aluminum Composite Extruded Fin Tube for Corrosion Resistant High Heat Transfer Extruded Finned Tube Applications
Aluminum Composite Extruded Fin Tube
,Copper Aluminum Composite Extruded Fin Tube
DELLOK Copper Aluminum Composite Extruded Fin Tube — precision-engineered bimetallic fin tubing designed for high-efficiency heat transfer in demanding industrial environments.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff.
Our production infrastructure includes 4 aluminum processing lines with an annual processing capacity exceeding 20,000 tons, 5 tube-drawing lines, and 47 fin tube production lines — including one imported McElroy production line from the United States — delivering an annual production capacity of over 12 million meters.
Quality is our eternal pursuit. Meticulous workmanship, a standardized management system, and systematic quality assurance represent Dellok (YONGHUI)'s commitment to quality. Quality control is not limited to final inspection; it spans the entire production process. Each batch of pipes is sampled, tested, and recorded as a quality guarantee for the final product.
Tubes with extruded fins provide complete protection to the base of the tube, as the fins are hardened during the extrusion process — making them stronger than applied fins.
- Upper temperature limit: 350°C
- Tube material: Any standard material we stock or as requested
- Fin material: Aluminium
Extruded fin tubes are produced by compressing an aluminum tube (or sleeve) onto the base tube. The bloom is exposed to very high pressures, which essentially "grows" the fins into the final fin profiles. This process manufactures an excellent, strong joint with great resistance (fin stiffness) as well as exceptional heat transfer capabilities (longevity, temperature range).
The advantages of extruded fin tubes include full protection of the bare tube against corrosion and high mechanical strength of the fin. Extruded finned tubes provide the most stable performance over time compared to other fin types. The fin is rolled from an outer aluminum tube using pressure to create a rolled "pressure bond" between the liner tube and fins. The aluminum fin material completely encloses the tube, except at the ends where a tube coating can be applied.
The bonding of the outer and inner tubes removes the risk of loss of contact with the aluminium due to thermal stress. Maximum operating temperature: 250°C. The transfer coefficient remains steady. Additionally, because the outer sleeve is continuous, no electrolytic couple is created.
The fins are more rigid and withstand handling shocks better compared to type "G" and "L" fins.
The extruded fin is formed from an outer aluminum tube with a large wall thickness (muff), which is aligned over an inner base tube. The two tubes are pushed through three arbors with rotating discs that squeeze or extrude the aluminum fins up and out of the muff material in a spiral shape in a single operation.
The resultant fin typically has a base (root) thickness of 0.035", an average fin thickness of 0.016", and a tip of 0.009", with an overall height of 16 mm (5/8"). The root thickness serves to form an uninterrupted bond over the entire tube length.
Murphy disc technology now makes it possible to fin a thinner muff, offering significant material savings. The recommended standard muff wall is 0.176" as opposed to the industry practice of 0.183"–0.210". In addition, the same growth factor can be used for pitches from 8 to 11 FPI, allowing standardization on one muff thickness and eliminating the need to stock multiple muff wall thicknesses. The same discs can be used to produce 5/8" (15.9 mm) or 1/2" (12.7 mm) high fins.
Model B produces a 5/8" high fin on tube sizes from 25 mm to 1.5" (38.1 mm). The Model B Extruded Finning Machine is now capable of 7/16" high integral copper fin at 7 to 10 FPI within the machine's tube size range (25 mm to 1.5"). Each machine is configured for the specific production requirements of the end user.
Extruded fin tubes are widely used in the refinery, petrochemical, and chemical industries for:
- Air-cooled condensers
- Air-cooled coolers for products
- Gas coolers
- Gas heaters
| Parameter | Metric | Imperial |
|---|---|---|
| Tube OD | 10–51 mm | 0.4"–2" |
| Tube Wall Thickness | 1.65–3.0 mm | 0.065"–0.118" |
| Tube Length | ≤ 18,500 mm | ≤ 60.7 ft |
| Fin Thickness | 0.3–1.2 mm | 0.012"–0.047" |
| Fin Height | 5–16 mm | 0.2"–0.63" |
| Fin Pitch | 100–555 mm | 3–14 FPI |
| Fin Type | Extruded | |
| Component | Material Options |
|---|---|
| Fin Material | Aluminum (most common grades: Alu. 1100, Alu. 1060, Alu. 6063); Copper |
| Tube Material |
C.S. (most common grades: A179, A192, SA210 GrA1/C, A106 Gr B); S.S. (most common grades: TP304, 316, 321, 347, A789); Copper (most common grades: UNS12200, 14200, 70600, CuNi 70/30, CuNi 90/10); Titanium (most common grade: B338 Gr2) |
| Applied Temperature | 300°C |
| Type of Service | Medium temperature, severe atmospheric corrosive environment |
Fin Type: Extruded Fin Tube
Tube Material: Copper, copper nickel, stainless steel, titanium, etc.
Fin Material: Copper, aluminum
Aluminum extruded finned tubes use the form of a base tube covered with an aluminum tube (the base tube can be carbon steel, stainless steel, or copper) through machine extrusion, forming a tube fin. The fin base and the tube outer wall are closely fitted, giving the finned tube a high heat transfer coefficient and excellent heat transfer performance.
Aluminum extruded finned tubes — also called "integral finned tubes" — are made by covering the base tube with an aluminum tube and extruding through a machine to form a tube fin. The fin base and tube outer wall are closely fitted, enabling high heat transfer coefficient and heat transfer performance. Extruded finned tubes can be made of iron, copper, or aluminum tube by compound rolling, offering the advantages of tight bonding, small thermal resistance, good heat transfer performance, high strength, small flow loss, strong anti-corrosion performance, resistance to deformation under long-term hot and cold working conditions, and long working life.
Process flow: Pipe line → compressing or rolling → strip peeling → washing → pressure test → blast blowing → packaging.
The extruded fin tube is formed from a bimetallic tube consisting of an aluminum outer tube and an inner tube of almost any material. The fin is formed by rolling the material from the outside of the outer tube to provide an integrated fin with excellent heat transfer performance and long life. The extruded fins provide excellent corrosion protection for the base tube.
The production method of the composite finned tube mainly includes the extrusion method: the bimetallic composite tube is lined with a mandrel and driven by the rotation of the roller blade. The composite tube is processed on the outer surface through the cavity formed by the rolling groove and the core head to produce fins. The heat transfer tube produced by this method is an organic whole with its outer tube and fins, so there is no contact heat loss, and it offers good performance and high heat transfer efficiency.
A fin tube is a tube with small fins around its outside surface. These fins act as a mechanism to transfer heat from the material inside the tube to the outside space, or vice versa. Fin tubes are used in applications requiring heat transfer from a hot fluid to a colder fluid through the tube wall. The rate of heat transfer depends on three factors: the temperature difference between the two fluids, the heat transfer coefficient between each fluid and the tube wall, and the surface area exposed to the fluid.
Finned tube heat exchangers generally use air to cool or heat fluids such as air, water, oil, or gas, or they can capture or recover waste heat. These heat exchangers are used in a broad range of industries including oil & gas, power generation, marine, and HVAC&R.
Extruded finned tubes are bimetallic tubes whose outer aluminum surface is finned by cold plastic deformation. Two major types are available: single-metal tubes (mono-metallic fin tubes) and bimetallic tubes (composite extruded fin tubes).
Good corrosion resistance, formability, and high thermal conductivity make aluminum an ideal material for the construction of these heat exchangers. A typical brazed heat exchanger (radiator or condenser) comprises fins, tubes, side plates, and header plates.
Extruded fin tubes are widely used in the refinery, petrochemical, and chemical industries for air-cooled condensers, air-cooled coolers for products, gas coolers, and gas heaters.
We adhere to an in-house Quality System (QMS) based on industry standards such as ASME, the National Board of Boilers & Pressure Vessels, and customer requirements. Our quality system is documented, audited, and enforced by our Quality Control department.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube