Cold Extrusion Corrosion Resistant Helical Fin Aluminum Extruded Fin Tube for Heat Exchanger
Aluminium Extruded Fin Tube
,Finned Aluminum Extrusion Tube
DELLOK Aluminum Extruded Fin Radiator Fin Tube
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff.
Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from the American brand McElroy
- Annual production capacity of 12 million meters and above
Quality is the eternal pursuit of our company. Meticulous workmanship, a standardized management system, and systematic quality assurance represent Dellok (YONGHUI)'s best commitment to quality. Quality control is not limited to final inspection — it spans the entire production process. We implement a comprehensive quality control and assurance system: each batch of pipes is sampled and tested, and records are kept as a guarantee for the final product.
| Manufacturing Process | Cold Extrusion |
|---|---|
| Fin-to-Tube Bond | Excellent |
| Heat Transfer Efficiency | Excellent |
| Mechanical Resistance | Excellent — can be frequently cleaned with high-pressure jets, unlike other fin tubes, thereby reducing downtime and increasing overall service life |
| Corrosion Protection | Excellent protection for the base tube, since the aluminum fin entirely covers the base tube (except bare ends) |
| Temperature Range | Up to a maximum of 300 °C |
The fins are rotary cold rolled from a smooth, thick-walled hollow blank tube slid over the core tube. Three multi-spindle disc packs extrude the hollow blank tube into helical high fins. During this process, the inner diameter of the hollow blank tube is reduced and simultaneously pressed onto the core tube, resulting in a mechanically solid joint.
- Fin Material: Aluminum / Copper
- Core Tube Material: Carbon Steel / Carbon Alloy Steel / Stainless Steel / Nickel Alloys / Copper / Copper Alloys / Titanium
- 100% fin-to-tube bond providing exceptional efficiency and longevity
- Excellent corrosion protection on the base tube
- Easy to clean with a high-pressure water jet without deforming the fins
- Continuous outer sleeve eliminates galvanic corrosion between the tube and fins
- Bonding of the outer and inner tubes removes the risk of contact loss with the aluminum due to thermal stress; fins are vibration resistant
- Higher heat transfer performance for the life of the unit
- Commonly used in applications with temperatures up to 325 °C
Extruded finned tubes provide the greatest resistance to atmospheric corrosion. The aluminum fin material completely encloses the tube, except at the ends where a tube coating can be applied. Where atmospheric corrosion is present and operation stays within design temperature limits, extruded finned tubes deliver the most stable performance over time compared to other fin types. The fin is rolled from an outer aluminum tube using pressure to create a rolled "pressure bond" between the liner tube and the fins.
Extruded finned tubes are commonly used in applications with temperatures up to 550 °F (approximately 288 °C).
Primary extruded finned tubes are used in high-temperature and corrosive atmospheric conditions, such as operating temperatures below 300 °C or offshore applications. Typical uses include heat pipe air-to-air heat exchangers for HVAC applications, air dehumidification in air treatment plants, and energy recovery in air exhaust systems.
This fin design is the least economical compared to other fin types, mainly due to the increased amount of aluminum used (around 40%) and the additional labor during manufacturing. However, this increased cost can be offset by using a lower-grade parent tube material.
| Fin Type | Extruded Fin Tube |
|---|---|
| Tube Material | Copper, Copper Nickel, Stainless Steel, Titanium, etc. |
| Fin Material | Copper, Aluminum |
Aluminum extruded finned tubes use a base tube covered with an aluminum tube (the base tube can be carbon steel, stainless steel, or copper) through machine extrusion, forming a tube fin. The fin base and the tube outer wall fit closely together, giving the finned tube a high heat transfer coefficient and excellent heat transfer performance.
Also called "integral finned tubes," aluminum extruded finned tubes can be made from iron, copper, or aluminum tube by compound rolling. This offers the advantages of tight bonding, small thermal resistance, good heat transfer performance, high strength, small flow loss, strong anti-corrosion performance, resistance to deformation under long-term hot and cold working conditions, and a long working life.
The production flow is: pipe line → compressing or rolling → strip peeling → washing → pressure test → blast blowing → packaging.
The extruded fin tube is formed from a bimetallic tube consisting of an aluminum outer tube and an inner tube of almost any material. The fin is formed by rolling the material from the outside of the outer tube to provide an integrated fin with excellent heat transfer performance and long life. The extruded fins provide excellent corrosion protection for the base tube.
The composite finned tube is produced mainly by the extrusion method: the bimetallic composite tube is lined with a mandrel and driven by the rotation of the roller blade; the composite tube is processed on its outer surface through the cavity formed by the rolling groove and the core head to produce the fins. The heat transfer tube produced by this method is an organic whole with its outer tube and fins, so there is no contact heat loss, and it delivers good performance and high heat transfer efficiency.
Q: What is your lead time for production?
A: Generally, samples need 1–3 days; mass production needs 15–30 days, also depending on your request.
Q: What is the warranty for your products?
A: We provide a one-year warranty for our products.
Q: What payment terms do you accept?
A: Trade Assurance, TT, and Western Union.
Q: What are the modes of transportation for the machines?
A: Air freight, sea freight, express delivery, and others. We will choose the most suitable transportation method according to your requirements.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube