X46cr13/4Cr13 Extruded Fin Tube and Aluminum Fin Tube with 300°C Max Working Temperature and 18,500mm Tube Length
Aluminium Extruded Fin Tube
,Finned Aluminum Extrusion Tube
DELLOK Aluminum Fin Rolled Exchanger Heat Finned Tube is a bimetallic extruded fin tube manufactured by inserting a base tube into an aluminum tube and directly extruding the aluminum into the desired fin specification. The tight contact between fin and tube surface improves heat transfer efficiency while providing considerable corrosion protection to the base tube.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff.
Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity of more than 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from the American brand McElroy
- Annual production capacity of 12 million meters and above
Quality is the eternal pursuit of our company. Meticulous workmanship, a standardized management system, and systematic quality assurance are Dellok (YONGHUI)'s best commitment to quality. Quality control is not limited to final inspection — it runs throughout the entire production process. We implement a complete quality control and assurance system: each batch of pipes is sampled and tested, and records are kept as a quality guarantee for the final product.
Bimetallic extruded fin tubes use a base tube inserted into an aluminum tube, with the aluminum directly extruded into the desired fin specification. The fin and tube surfaces are in tight contact, improving heat transfer efficiency and giving considerable corrosion protection to the base tube.
Extruded fin tubes are produced by compressing an aluminum tube, or sleeve, onto the base tube. The bloom is exposed to very high pressures, which essentially "grows" the fins into the final fin profiles. This process creates an excellent, strong joint with great resistance (fin stiffness) as well as exceptional heat transfer capabilities (longevity, temperature range).
The advantages of extruded fin tubes include full protection of the bare tube against corrosion and high mechanical strength of the fin. Extruded finned tubes provide the most stable performance over time compared with other fin types. The fin is rolled from an outer aluminum tube using pressure to create a rolled "pressure bond" between the liner tube and fins. The aluminum fin material completely encloses the tube, except at the ends where a tube coating can be applied.
The bonding of the outer and inner tubes removes the risk of loss of contact with the aluminum due to thermal stress. Maximum operating temperature is 250°C. The transfer coefficient remains steady. Additionally, because the outer sleeve is continuous, no electrolytic couple is created.
The fins are more rigid and withstand handling shocks better compared with type "G" and "L" fins.
- Manufacturing Process: Cold extrusion
- Fin-to-Tube Bond: Excellent
- Heat Transfer Efficiency: Excellent
- Mechanical Resistance: Excellent — can be frequently cleaned with high-pressure jets unlike other fin tubes, reducing downtime and increasing overall life
- Corrosion Protection: Excellent protection for the base tube, since the aluminum entirely covers the base tube (except bare ends)
- Temperature Range: Up to a maximum of 300°C
- Petroleum, chemical, and petrochemical industries
- Natural gas treatment
- Steel industry: blast furnace and converter cooling systems
- Power generation: steam turbine exhaust condensing
- Contact condensing with cooling of circulating condensate
- Fossil and nuclear power plants
- Air conditioning (freon, ammonia, propane)
- Incineration of household refuse
- Compressor coolers, etc.
| Parameter | Metric | Imperial |
|---|---|---|
| Tube OD | 10–51 mm | 0.4"–2" |
| Tube Wall Thickness | 1.65–3.0 mm | 0.065"–0.118" |
| Tube Length | ≤ 18,500 mm | ≤ 60.7 ft |
| Fin Thickness | 0.3–1.2 mm | 0.012"–0.047" |
| Fin Height | 5–16 mm | 0.2"–0.63" |
| Fin Pitch | 100–555 mm | 3–14 FPI |
| Fin Type | Extruded | |
| Component | Available Materials |
|---|---|
| Fin Material | Aluminum (most common grades: Alu. 1100, Alu. 1060, Alu. 6063); Copper |
| Tube Material |
C.S. (most common grades: A179, A192, SA210 GrA1/C, A106 Gr B); S.S. (most common grades: TP304, 316, 321, 347, A789); Copper (most common grades: UNS12200, 14200, 70600, CuNi70/30, CuNi 90/10); Titanium (most common grade: B338Gr2) |
| Applied Temperature | 300°C |
| Type of Service | Medium temperature, severe atmospheric corrosive environment |
Fin Type: Extruded fin tube
Tube Material: Copper, copper nickel, stainless steel, titanium, etc.
Fin Material: Copper, aluminum
Aluminum extruded finned tubes, also called "integral finned tubes," use the form of a base tube covered with an aluminum tube (the base tube can be carbon steel, stainless steel, or copper) through machine extrusion, forming a tube fin. The fin base and the tube outer wall are close fitting, which allows the finned tubes to achieve a high heat transfer coefficient and strong heat transfer performance.
Extruded finned tubes can be made of iron, copper, or aluminum tube by compound rolling. They offer the advantages of tight bonding, small thermal resistance, good heat transfer performance, high strength, small flow loss, strong anti-corrosion performance, resistance to deformation under long-term hot and cold working conditions, and long working life.
The production flow is: pipe line → compressing or rolling → strip peeling → washing → pressure test → blast blowing → packaging.
The extruded fin tube is formed from a bimetallic tube consisting of an aluminum outer tube and an inner tube of almost any material. The fin is formed by rolling the material from the outside of the outer tube to provide an integrated fin with excellent heat transfer performance and long life. The extruded fins provide excellent corrosion protection for the base tube.
The production method of the composite finned tube mainly uses the extrusion method: the bimetallic composite tube is lined with a mandrel, and driven by the rotation of the roller blade, the composite tube is processed on the outer surface through the cavity formed by the rolling groove and the core head to produce fins. The heat transfer tube produced by this method is an organic whole with its outer tube and fins, so there is no contact heat loss, and it delivers good performance and high heat transfer efficiency.
A: Generally, samples need 1–3 days; mass production needs 15–30 days, also depending on your request.
A: We provide a one-year warranty for the products.
A: Trade assurance, TT, Western Union.
A: Air freight, sea freight, express delivery, etc. We will choose the most suitable transportation method according to your requirements.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube