Bimetallic X46Cr13/4Cr13 Extruded Fin Tube with Various Specifications for Extruded Finned Tube Heat Exchange
Aluminium Extruded Fin Tube
,Finned Aluminum Extrusion Tube
DELLOK Aluminum Bimetal Extruded Finned Tube of Good Quality
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff.
Our production capabilities include 4 aluminum processing lines with an annual processing capacity of over 20,000 tons, 5 tube-drawing lines, and 47 fin tube production lines — including one imported McElroy line from the United States — delivering an annual production capacity of more than 12 million meters.
Quality is our eternal pursuit. Meticulous workmanship, a standardized management system, and systematic quality assurance are Dellok (YONGHUI)'s best commitment to quality. Quality control is not limited to final inspection; it runs throughout the entire production process. Each batch of pipes is sampled and tested, with records kept as a guarantee for the final product.
The finned tubes we provide are of the Extruded Type, which differs from those produced by HF welding and wrapping methods. The fins are obtained by roll forming the outer surface of a soft seamless plain tube. This technology simply squeezes the wall thickness, transforming it into straight fins on the tube. As a result, the fin and the tube are integrated and inseparable, which avoids heat resistance between fin and tube and optimizes heat exchange efficiency.
Based on this structure, the extruded type can withstand more severe working conditions than other finned tubes. It also offers several unique features, including enhanced physical structure, resistance to vibration, anti-corrosion ability, and a long service life.
Under this technology, two major types of finned tubes are available: single metal tubes and bimetallic tubes. The former uses copper, aluminum, or copper-nickel alone. The latter has a core tube on the inside made of harder material; the outer tube is rolled onto the core tube to provide a tight bond and good thermal contact between the two tubes.
Customized finned tubes are available, with specifications listed in the table below. If required, the fin tube can be made into various forms after the soft annealing process. They can be used for cooling and heating across a wide range of conditions — for example, coils in water heaters, oil coolers in large machines, heat transfer parts in boilers and heat recovery systems, and condenser or evaporator parts in the air-conditioning and refrigeration industry.
The material for our fin tubes covers Copper (C10200, C12000, C12200), Copper Nickel (C70600), Aluminum (1060), Aluminum alloy, Aluminum-Steel (bimetallic), Aluminum-Stainless Steel (bimetallic), Aluminum-Copper (bimetallic), Aluminum-Copper Nickel (bimetallic), and Copper-Copper Nickel (bimetallic).
- Optimized inner-to-outer surface ratio
- High heat exchange rate
- Enhanced structure due to the roll forming process
- Flexible as straight tube, bent, or coiled heat exchangers
- Low heat resistance between fins and tube
- Strong resistance to shock and thermal expansion and contraction
- Cost and energy saving due to long service life and high exchange rate
The fin tubes are mainly used in:
- Heating: gas-fired boilers, condensing boilers, flue gas condensers
- Mechanical and automotive engineering: oil coolers, mine coolers, air coolers for diesel engines
- Chemical engineering: gas coolers and heaters, process coolers
- Power plants: air coolers, cooling towers
- Nuclear engineering: uranium enrichment plants
Our company is a high-tech enterprise integrating research, design, manufacturing, and installation of thermal conversion equipment. We specialize in the production of copper tubes, metal tubes, aluminum tube extruded finned tubes, high-frequency finned tubes, laser-welded finned tubes, U-bent tubes, coils, and heat exchangers.
We operate a 12,000 square meter workshop equipped with fully automated numerical control cutting machines, a high-frequency welded finned tube line, a laser-welded finned tube line, and an extruded finned tube line. Guided by customer needs, we continue to provide high-quality fin tubes and heat exchangers for the global thermal energy industry.
Our professional team is composed of thermology doctors, masters, and related engineers. We can provide non-standard thermal conversion products according to customer needs to meet the requirements of various customers.
We can package products according to the customer's requirements to ensure safe arrival in all kinds of transportation scenarios. If you have special requirements on packaging, please contact us.
Q: What is your lead time for production?
A: Generally, samples need 1–3 days and mass production needs 15–30 days, also depending on your request.
Q: What is the warranty for your products?
A: We provide a one-year warranty for the products.
Q: What payment terms do you accept?
A: Trade assurance, TT, and Western Union.
Q: What are the modes of transportation for the machines?
A: Air freight, sea freight, express delivery, and others. We will choose the most suitable transportation method according to your requirements.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube