Carbon Steel LL Type Finned Tube Corrosion Resistant LL Finned Tube with Overlapping Fins for Heat Exchangers
LL Type Finned Tube
DELLOK Carbon Steel LL Type Finned Tube
The LL type finned tube is manufactured by forming an aluminium fin strip into an L shape and tension-winding it onto the base tube with overlapping fins. This construction offers improved corrosion resistance compared to the standard L type, making it a practical choice for moderately corrosive environments where a cost-effective heat transfer solution is required.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff.
Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines, including 1 imported line from the American brand McElroy
- Annual production capacity of 12 million meters or more
Quality is our eternal pursuit. Our meticulous production workshop, standardized management system, and systematic quality assurance represent DELLOK (YONGHUI)'s commitment to quality. Quality control is not limited to final inspection — it runs throughout the entire production process. Each batch of pipes is sampled, tested, and recorded as a quality guarantee for the final product.
Manufactured similarly to the L fin, except that the base tube is knurled before wrapping the L-shaped fin strip. After wrapping, the fin foot is also knurled onto the base tube to increase the bond between tube and fin, resulting in improved heat transfer performance.
- Maximum operating temperature: 260 °C
- Tube material: no theoretical limit
- Fin material: aluminium or copper
Aluminium fin strip is formed into an L shape and then tension-wound onto the base tube.
- Maximum operating temperature: 150 °C
- Fin material: aluminium or copper
- Tube material: no theoretical limit
Aluminium fin strip is formed into an L shape and tension-wound onto the tube with overlapping fins, as shown in the diagram above.
- Maximum operating temperature: 180 °C
- Fin material: aluminium or copper
- Tube material: no theoretical limit
Applied fin tube is made with strip wrapped under tension around the base of the tube. Fins are welded to the base tube at the strip ends.
- Suitable for low-temperature applications
- Most cost-effective finning method compared to alternatives
- Failed fins can be easily removed during production, allowing the bare tube to be reused for finning
- No need to cut a helical groove into the core tube
- Fins can be applied to very thin-walled tubes — particularly desirable when using expensive alloys as the core tube
- Withstands temperatures up to 130 °C without risk of atmospheric corrosion or thermal stress
- Often used as an alternative to the more expensive extruded fin type in corrosive environments
- Maximum operating temperature: 170 °C
- Corrosion-resistant tubes
- Vibration resistance
- Withstands temperatures up to 320 °C (608 °F)
- Combines high thermal performance and stress resistance with protection from air corrosion
- Can replace any other form of finned tube
| Atmospheric Corrosion Resistance | OK |
|---|---|
| Mechanical Resistance | Poor |
| Fin Contact | Interference Fit |
| Fin-to-Tube Bond | Moderate |
| Heat Transfer Efficiency | Moderate |
- Petroleum, chemical, and petrochemical process industries
- Natural gas treatment
- Steel industry: blast furnace and converter systems
- Power generation: steam turbine exhaust condensing
- Contact condensing with cooling of circulating condensate
- Fossil and nuclear power plants
- Air conditioning (Freon, ammonia, propane)
- Incineration of household refuse
- Compressor coolers, and more
| Fin Type | L / LL / KL Finned Tube |
|---|---|
| Tube Material | Carbon steel, stainless steel, copper, aluminum |
| Fin Material | Copper, aluminum |
| Fin Tube Length | No limit |
| Working Temperature | 230 °C |
| Features | Winding process with high production efficiency, uniform fin spacing, good heat transfer, high fin ratio, and protection of the base tube from air erosion |
A finned tube is a tube with small fins around its outer surface. These fins act as a mechanism for transferring heat from the material inside the tube to or from the outer environment. Finned tubes are used in applications where heat is transferred from a hot fluid to a cooler fluid through the tube wall. The rate of heat transfer depends on three factors:
- The temperature difference between the two fluids
- The coefficient of heat transfer between each fluid and the wall
- The surface area of fluid exposure
Adopting the winding process, this type offers high production efficiency, uniform fin spacing, good heat transfer, and a high fin ratio, while protecting the base tube from air erosion. The aluminum or copper fin is folded into an L shape and continuously spirally wound onto the outer surface of the base tube under tension.
- Maximum working temperature: 150 °C (302 °F)
- Atmospheric corrosion resistance: acceptable
- Mechanical resistance: poor
- Common fin materials: aluminum and copper
Building on the L-shaped foundation, the fin root completely covers the outer surface of the base tube. To some extent, this fin type guarantees better corrosion resistance.
- Maximum working temperature: 180 °C (356 °F)
- Atmospheric corrosion resistance: acceptable
- Mechanical resistance: poor
- Common fin materials: aluminum and copper
Before the fins are continuously wound onto the steel pipe surface, the outer surface of the base pipe undergoes a knurling process. After the fins are wound, the fin root attached to the steel pipe is also knurled to strengthen the bond between the steel pipe and the fins. This fin type therefore ensures better heat transfer characteristics than L and LL fins.
- Maximum working temperature: 260 °C (500 °F)
- Atmospheric corrosion resistance: acceptable
- Mechanical resistance: poor
- Common fin materials: aluminum and copper
L / LL / KL finned tubes are mainly used in air coolers for the petrochemical, electric power, paper making, tobacco, and building heating industries, as well as in air heaters and air heaters in spray drying systems for products such as vegetable protein and starch in the food industry. Additional uses include blast furnace and converter systems, power generation (condensate exhaust from steam turbines, condensate contact cycle cooling condensation, fossil and nuclear power plants), air conditioners (Freon, ammonia, propane), waste incineration equipment, and compressor coolers.
We customize finned tubes according to each customer's individual requirements. For more details about L / LL / KL finned tubes, please contact us.
A: Generally, samples require 1–3 days and mass production requires 15–30 days, depending on your request.
A: We provide a one-year warranty for our products.
A: Trade assurance, TT, and Western Union.
A: Air freight, sea freight, express delivery, and others. We will choose the most suitable transportation method according to your requirements.
Product Category: L / LL / KL Finned Tube
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube