Corrosion Resistant LL Type Spiral Finned Tube with High Heat Transfer Efficiency for 180°C Maximum Operating Temperature Applications
LL Type Spiral Finned Tube
,DELLOK LL Type Finned Tube
DELLOK LL Type Spiral Finned Tube — precision-engineered finned tubing designed for efficient heat transfer in demanding industrial environments.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff members.
Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines, including 1 imported McElroy production line from the United States
- Annual production capacity of 12 million meters or more
Quality is our eternal pursuit. Our production workshop combines meticulous workmanship, a standardized management system, and systematic quality assurance — Dellok (YONGHUI)'s best commitment to quality. Quality control is not limited to final inspection; it spans the entire production process. We implement a comprehensive quality control and assurance system, with each batch of pipes sampled, tested, and recorded as a guarantee for the final product.
Manufactured similarly to the L fin, except that the base tube is knurled before wrapping the L-shaped fin strip. After wrapping, the fin foot is also knurled onto the base tube to increase the bond between tube and fin, resulting in improved heat transfer performance.
| Maximum Operating Temperature | 260 °C |
|---|---|
| Tube Material | No theoretical limit |
| Fin Material | Aluminum or copper |
Aluminum fin strip is formed into an L shape and then tension-wound onto the base tube.
| Maximum Operating Temperature | 150 °C |
|---|---|
| Fin Material | Aluminum or copper |
| Tube Material | No theoretical limit |
Aluminum fin strip is formed into an L shape and tension-wound onto the tube with overlapping fins, as illustrated.
| Maximum Operating Temperature | 180 °C |
|---|---|
| Fin Material | Aluminum or copper |
| Tube Material | No theoretical limit |
Applied fin tube is made with strip wrapped under tension around the base of the tube. Fins are welded to the base tube at the strip ends.
- Suitable for low-temperature applications.
- The most cost-effective finning method compared to other types.
- Failed fins can be easily removed during production, and the bare tube can be reused for finning.
- No helical groove is required on the core tube.
- Fins can be applied to very thin-walled tubes — particularly desirable when using expensive alloys as the core tube.
- The tube can withstand temperatures up to 130 °C without the risk of atmospheric corrosion or thermal stress.
- Often used as an alternative to the more expensive extruded fin type in corrosive environments.
- Maximum operating temperature: 170 °C.
- Corrosion-resistant tubes.
- Vibration resistance.
- Can withstand temperatures up to 320 °C (608 °F).
- High thermal performance and stress resistance combined with protection from air corrosion — a unique combination.
- Any form of finned tube can be replaced with the KL type.
| Atmospheric Corrosion Resistance | OK |
|---|---|
| Mechanical Resistance | Poor |
| Fin Contact | Interference Fit |
| Fin-to-Tube Bond | Moderate |
| Heat Transfer Efficiency | Moderate |
- Petroleum, chemical, and petrochemical process industries
- Natural gas treatment
- Steel industry: blast furnace and converter systems
- Power generation: steam turbine exhaust condensing
- Contact condensing with cooling of circulating condensate
- Fossil and nuclear power plants
- Air conditioning (Freon, ammonia, propane)
- Incineration of household refuse
- Compressor coolers, and more
| Fin Type | L / LL / KL Finned Tube |
|---|---|
| Tube Material | Carbon steel, stainless steel, copper, aluminum |
| Fin Material | Copper, aluminum |
| Fin Tube Length | No limit |
| Working Temperature | 230 °C |
| Features | Winding process for high production efficiency, uniform fin spacing, good heat transfer, high fin ratio, and protection of the base tube from air erosion |
A finned tube is a tube with small fins around its outer surface. These fins act as a mechanism for transferring heat from the material inside the tube to or from the surrounding space. Finned tubes are used in applications where heat is transferred from a hot fluid to a cooler fluid through the tube wall. The rate of heat transfer depends on three factors:
- The temperature difference between the two fluids
- The coefficient of heat transfer between each fluid and the wall
- The surface area of fluid exposure
Adopting the winding process, production efficiency is high, fin spacing is uniform, heat transfer is good, the fin ratio is high, and the base tube is protected from air erosion. The aluminum or copper fin is folded into an L shape and continuously spirally wound onto the outer surface of the base tube under tension.
Maximum working temperature: 150 °C (302 °F). Acceptable atmospheric corrosion resistance, poor mechanical resistance. Commonly used fin materials are aluminum and copper.
Building on the L-shaped foundation, the fin root completely covers the outer surface of the base tube. To some extent, this fin type guarantees better corrosion resistance.
Maximum working temperature: 180 °C (356 °F). Acceptable atmospheric corrosion resistance, poor mechanical resistance. Commonly used fin materials are aluminum and copper.
Before the fins are continuously wound onto the steel pipe surface, the outer surface of the base pipe undergoes a knurling process. After the fins are wound, the root of the fin attached to the steel pipe is also knurled to strengthen the combination of steel pipe and fins. For this reason, this fin type ensures better heat transfer characteristics than L and LL fins.
Maximum working temperature: 260 °C (500 °F). Acceptable atmospheric corrosion resistance, poor mechanical resistance. Commonly used fin materials are aluminum and copper.
Mainly used in air coolers in petrochemical, electric power, paper making, tobacco, building heating, and other industries. Also used in air heaters and air heaters in spray drying systems such as vegetable protein and starch in the food industry, blast furnace and converter systems, power generation (condensate exhaust gas discharged from steam turbines, condensate contact cycle cooling condensation, fossil and nuclear power plants), air conditioners (Freon, ammonia, propane), waste incineration equipment, compressor coolers, and more.
We customize finned tubes according to individual customer requirements. For more details about L/LL/KL finned tubes, please inquire with us.
A: Generally, samples need 1–3 days, and mass production needs 15–30 days, also depending on your request.
A: We provide a one-year warranty for our products.
A: Trade assurance, TT, and Western Union.
A: Air freight, sea freight, express delivery, etc. We will choose the most suitable transportation method according to your requirements.
Product Categories: L/LL/KL Finned Tube
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube