Spiral Cold Wound Finned Tube X46cr13/4Cr13 Corrosion Resistant L Finned Tube for Air Coolers
Spiral Cold Wound Finned Tube
,DELLOK Cold Wound Finned Tube
The DELLOK Spiral Cold Wound Finned Tube is a high-efficiency heat transfer component manufactured by winding L, LL, or KL shaped fin strip under tension around a base tube. This construction significantly increases the external surface area, enabling superior heat exchange between fluids separated by the tube wall. Available in carbon steel, stainless steel, copper, and aluminum configurations, these finned tubes are engineered for demanding industrial applications including petrochemical processing, power generation, and air conditioning systems.
Established in 2002 and located in Jiangsu, China, DELLOK has grown into a leading manufacturer with 66 million yuan in fixed assets, over 200 employees, and 33 technical specialists. Our production infrastructure includes 4 aluminum processing lines with an annual capacity exceeding 20,000 tons, 5 tube-drawing lines, and 47 fin tube production lines—including an imported McElroy line from the United States—delivering an annual output of over 12 million meters.
Quality is our eternal pursuit. Our meticulous production workshop, standardized management system, and systematic quality assurance represent DELLOK's commitment to excellence. Quality control is not limited to final inspection but is integrated throughout the entire production process. Each batch of pipes is sampled, tested, and recorded as a quality guarantee for the final product.
Manufactured similarly to the L fin type, except the base tube is knurled before wrapping the L-shaped fin strip. After wrapping, the fin foot is also knurled onto the base tube to increase the bond between tube and fin, resulting in enhanced heat transfer performance.
- Maximum operating temperature: 260°C
- Tube material: No theoretical limit
- Fin material: Aluminum or copper
Aluminum fin strip is formed into an L shape and then tension-wound onto the base tube.
- Maximum operating temperature: 150°C
- Fin material: Aluminum or copper
- Tube material: No theoretical limit
Aluminum fin strip is formed into an L shape and tension-wound onto the tube with overlapping fins, providing improved corrosion protection at the fin root.
- Maximum operating temperature: 180°C
- Fin material: Aluminum or copper
- Tube material: No theoretical limit
Applied fin tube is made with strip wrapped under tension around the base of the tube. Fins are welded to the base tube at the strip ends to secure the winding.
- Suitable for low-temperature applications.
- Most cost-effective finning method compared to other types.
- Failed fins can be easily removed during production, and the bare tube can be reused for finning.
- No need to make a helical groove over the core tube.
- Fins can be placed on very thin-walled tubes—particularly desirable when using expensive alloys as the core tube.
- Withstands temperatures up to 130°C without risk of atmospheric corrosion or thermal stress.
- Often used as an alternative to more expensive extruded fin types in corrosive environments.
- Maximum operating temperature: 170°C.
- Corrosion-resistant construction.
- Vibration resistance.
- Withstands temperatures up to 320°C (608°F).
- High thermal performance and stress resistance combined with protection from air corrosion—a unique combination.
- Any form of finned tube can be replaced with the KL type.
| Property | Rating |
|---|---|
| Atmospheric Corrosion Resistance | OK |
| Mechanical Resistance | Poor |
| Fin Contact | Interference Fit |
| Fin-to-Tube Bond | Moderate |
| Heat Transfer Efficiency | Moderate |
- Petroleum, chemical, and petrochemical process industries
- Natural gas treatment
- Steel industry: blast furnace and converter systems
- Power generation: steam turbine exhaust condensing
- Contact condensing with cooling of circulating condensate
- Fossil and nuclear power plants
- Air conditioning (Freon, ammonia, propane)
- Incineration of household refuse
- Compressor coolers
- Air coolers in paper making, tobacco, and building heating industries
- Air heaters and spray drying systems (e.g., vegetable protein and starch in food industry)
A finned tube is a tube with small fins around its outer surface. These fins act as a mechanism for transferring heat from the material inside the tube to or from the outer environment. Finned tubes are used in applications where heat is transferred from a hot fluid to a cooler fluid through the tube wall. The rate of heat transfer depends on three factors:
- The temperature difference between the two fluids.
- The coefficient of heat transfer between each fluid and the wall.
- The surface area of fluid exposure.
Adopting the winding process, production efficiency is high, fin spacing is uniform, heat transfer is good, and the fin ratio is high. The base tube is protected from air erosion. Aluminum or copper fin strip is folded into an L shape and continuously spirally wound on the outer surface of the base tube under tension.
- Maximum working temperature: 150°C (302°F)
- Atmospheric corrosion resistance: Acceptable
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
Building on the L-shaped foundation, the fin root completely covers the outer surface of the base tube. To some extent, this fin type guarantees better corrosion resistance than the standard L type.
- Maximum working temperature: 180°C (356°F)
- Atmospheric corrosion resistance: Acceptable
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
Before the fins are continuously wound on the surface of the steel pipe, the outer surface of the base pipe undergoes a knurling process. After the fins are wound, the root of the fin attached to the steel pipe is also knurled to strengthen the combination of steel pipe and fins. This fin type ensures better heat transfer characteristics than L and LL types.
- Maximum working temperature: 260°C (500°F)
- Atmospheric corrosion resistance: Acceptable
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
We customize finned tubes according to individual customer requirements. For more details about L, LL, or KL finned tubes, please contact us for a consultation.
Product Category: L/LL/KL Finned Tube
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube