Carbon Steel Studded Tube for Petrochemical Industry Heat Exchanger Applications
DELLOK Carbon Steel Studded Tube
,Petrochemical Industry Studded Tube
DELLOK petrochemical industry carbon steel studded tubes are manufactured by fully automatic resistance welding of steel studs onto a base tube. The resulting extended surface delivers high heat-transfer efficiency and is engineered for fired heaters, boilers, and convection sections where surfaces are exposed to corrosive environments and dirty flue gas.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets and employs more than 200 people, including 33 technical staff.
Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity of more than 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines, including 1 imported line from the American brand McElroy
- Annual production capacity of 12 million meters or more
Quality is our eternal pursuit. Meticulous workmanship, a standardized management system, and systematic quality assurance are DELLOK (YONGHUI)'s commitment to quality. Quality control is not limited to final inspection — it runs throughout the entire production process. Each batch of pipes is sampled and tested, and records are kept as a quality guarantee for the final product.
Steel studs are welded onto the base tube to form the studded tube. The studs are arranged in a specific formation along the length of the tube to increase surface area and heat transfer.
- Carbon steels (black welded pipe)
- Low alloy steels
- Stainless steel (stainless steel welded tube)
- Cylindrical
- Elliptical
- Lens type
Furnaces, chemical and petrochemical industries, power stations, and similar applications where liquid media under high pressure must be heated or cooled.
Studs are fully automatically welded onto the tube by resistance welding.
Due to their high rigidity, studded tubes can be used even under extreme temperature and pressure conditions.
| Parameter | Metric | Imperial |
|---|---|---|
| Tube O.D. | 12~273 (mm) | 3/8"~10" (NPS) |
| Tube Wall Thickness | 2.11~25.4 (mm) | 0.08"~1" |
| Tube Length | ≤12000 (mm) | ≤39 ft |
| Fin Thickness | 1.0~1.5 (mm) | 0.04"~0.06" |
| Fin Height | 5~25 (mm) | 0.2"~0.98" |
| Fin Quantity | 1U~36U | 1U~36U |
Studded tubes are used as a substitute for finned tubes for heat transfer in the petrochemical industry, generally in fired heaters and boilers where the surface is exposed to a very corrosive environment and where very dirty soot formation requires frequent or aggressive cleaning.
The studs are automatically welded to the tube by an electric resistance welding machine. The welding process is controlled by a PLC program; the stepping motor and indexing adopt a brake motor. All welding parameters — including the number of studs, pitch, and compensation coefficient — are entered via a human machine interface (HMI). Product quality is ensured by settings made according to process requirements.
The automatic stud feeder was developed by our engineers, combining our extensive experience in manufacturing extended surfaces with the most modern control technology available on the market. This technology has delivered more efficient production and consistent welding quality.
DELLOK studded tubes are generally installed in convection sections and boilers where the surface is exposed to severe operating conditions involving dirty flue gas.
Studded tubes are a type of metal tube with studs welded onto the metal tube. The studs are arranged in a specific formation throughout the length of the tube. They are often used in boilers and refineries. Because they increase the surface area for higher heat transfer, they are used for reheating.
- Heat exchange efficiency is equivalent to 2–3 times that of a bare pipe.
- Easier cleaning, especially for operating cases with very dirty flue gas produced by burning heavy oil, diesel, or residual oil.
- Increases the film heat transfer coefficient of flue gas to the furnace tube.
- Improves efficiency in heat recovery processes and in direct-flame hostile atmospheres.
- Reduces the amount of bare pipe used in these processes — the heat transfer surface of one studded pipe is equivalent to that of 4 to 10 bare pipes.
- Ideal for process applications where dirty fuels are used and where environments are harsh in terms of temperature and/or corrosion.
The studded fin tube is a standard frequency electric-resistance-welded studded type surface. It is normally manufactured with round carbon steel studs on carbon, alloy, or stainless steel tubes with diameters from 1.5" to 12.75".
The four most important factors / process parameters influencing high-frequency welding are:
- Electrical power
- Pressure applied
- Welding time
- Cooling time
Finding the optimal process parameters depends on your specific equipment, the materials involved, and the specific geometries, including thickness and area to be welded. Achieving optimal results is often an experimental process guided by experience. As a guiding rule, the thicker the material and the shorter the weld times you need, the stronger the electrical power / HF generator you require.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube