A335 Studded Tube and Studded Fin Tube for Dirty Gas Streams and Corrosive Environment
Corrosive Environment Studded Tubes
,A335 Studded Tubes
,Dirty Gas Streams Studded Tubes
DELLOK A335 Studded Tubes for Dirty Gas Streams and Corrosive Environments
Studded tubes are manufactured by electrical resistance welding of specially formed studs in rows around a tube. Studs can be supplied in a variety of sizes and shapes, and the arrangement pattern can be varied by changing the number of studs per row, the spacing between rows, and whether studs in adjacent rows are offset. Studs may also be applied to just one side of the tube, or several different stud heights may be used within the same row. The studs are hand-loaded into the electrodes and then automatically welded.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff. Our facilities include 4 aluminum processing production lines with an annual processing capacity of over 20,000 tons, 5 tube-drawing production lines, 47 fin tube production lines, and 1 imported production line from the American brand McElroy, with an annual production capacity of 12 million meters and above.
Quality is our eternal pursuit. Meticulous workmanship, a standardized management system, and systematic quality assurance represent DELLOK (YONGHUI)'s commitment to quality. Quality control is not limited to final inspection — it extends throughout the entire production process. We implement a comprehensive quality control and assurance system: each batch of pipes is sampled and tested, and records are retained as a quality guarantee for the final product.
Stud fin tube is produced by electrical resistance welding of specially formed studs in rows around the tube. Studs are available in a variety of sizes and shapes, and the arrangement pattern can be adjusted by changing the number of studs per row, the spacing between rows, and whether studs in adjacent rows are offset. Studs can also be applied to just one side of the tube, or several different stud heights can be used in the same row. The studs are hand-loaded into the electrodes and then automatically welded.
Studs are fully automatically welded onto the tubes (pipes) by resistance welding.
Due to their high rigidity, studded tubes can be used even under extreme temperature and pressure conditions.
- Compact design that occupies less space.
- Highly durable construction.
Studded tubes are used in furnaces, the chemical and petrochemical industries, power stations, and similar environments where liquid media under high pressure must be heated or cooled.
| Tube OD | 25–273 (mm) | 1"–10" (NPS) |
|---|---|---|
| Tube Wall Thk | 3.5–28.6 (mm) | 0.14"–1.1" |
| Tube Length | ≤25,000 (mm) | ≤82 ft |
| Stud Thk | 6–25.4 (mm) | 0.23"–1" |
| Stud Height | 10–35 (mm) | 0.4"–1.38" |
| Stud Pitch | 8–30 (mm) | 0.3"–1.2" |
| Stud Type | Cylindrical, Elliptical, Lens type | |
| Stud to tube surface angle | Vertical or Angular | |
| Stud Material | C.S. (most common grade: Q235B) S.S. (most common grades: AISI 304, 316, 409, 410, 321, 347) A.S. |
|---|---|
| Tube Material | C.S. (most common grade: A106 Gr.B) S.S. (most common grades: TP304, 316, 321, 347) A.S. (most common grades: T/P5, 9, 11, 22, 91) |
| Type of Service | High temperature |
Product Categories: Studded Tube
Q1: Are you a trading company or a manufacturer?
A: We are a manufacturing factory and can accept OEM orders. You are welcome to visit our factory and check our products.
Q2: Can I have a sample?
A: Yes, you are welcome to place a sample order to test and check quality. Mixed samples are also acceptable.
Q3: What is your lead time for production?
A: Generally, samples require 1–3 days and mass production requires 15–30 days, depending on your request.
Q4: What is the warranty for your products?
A: We provide a one-year warranty for our products.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube