Seamless Copper Low Fin Tube Integral Low Finned Tube for Heat Exchanger Condenser Evaporator Applications
DELLOK Low Fin Tube
,Seamless Copper Low Fin Tube
,Integral Low Fin Tube
DELLOK Seamless Copper Integral Low Fin Tube is an extruded tubing product featuring short, low fins formed directly from the parent tube material. The fins are rolled out from the outer wall of the plain tube, ensuring the tube and fins remain a single, continuous piece. This construction delivers enhanced heat transfer performance while maintaining the same outside diameter as a smooth tube, allowing seamless integration into standard shell and tube baffles and tube sheets.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff members.
Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines, including 1 imported McElroy production line from the United States
- Annual production capacity of 12 million meters or more
Quality is our eternal pursuit. Our production workshop operates with meticulous workmanship, a standardized management system, and systematic quality assurance — representing DELLOK (YONGHUI)'s best commitment to quality. Quality control is not limited to final inspection; it extends throughout the entire production process. We implement a comprehensive quality control and assurance system, with each batch of pipes sampled, tested, and recorded as a guarantee of final product quality.
Low Fin (Integral) tubing is a type of extruded tubing consisting of short, low fins. It offers the advantage of adding surface area to a smooth tube while maintaining the same outside diameter. Low Fin enhanced tubes can be used in standard shell and tube baffles and tube sheets.
This construction method differs significantly from cutting grooves onto the tube — a shortcut often taken by those unfamiliar with proper manufacturing techniques. Low finned tubes are formed by direct rotational processing of the tube, meaning there is no risk of fin detachment even if the tube is later bent. They also possess excellent durability and anti-vibration properties once in operation. A Low Fin Tube is formed by passing a tube through a set of rollers that shape the fins from the parent material, causing it to flow in the desired manner.
Low fin (integral) tube is an extruded tube consisting of short low fins. The fins are rolled out from the outer wall of the plain tube by rollers, with the tube and fins forming a single, continuous piece of material.
- Offers 2.5 to 3 times the external surface area of a bare tube
- Enhanced heat exchanger efficiency means less tube is required to accomplish the same heat transfer as a bare tube
- Can increase the performance of an existing exchanger without the difficult and expensive task of building new shells
- Reduced space and weight — extremely valuable in offshore production or high-elevation distillation columns
- Low finned technology can transform large shell and tube exchangers into compact heat exchangers
- Low maintenance requirements
- Persistent resistance against rust
- Lightweight construction
Integral Low Fin Tubes are suitable for a wide range of heat transfer applications, including:
- Generators for absorption refrigerators
- Condensers in refrigeration systems
- Heat transfer equipment in other industries
- Screw cold water units
- Full liquid evaporators for centrifugal systems
- Evaporators and oil coolers
| Parameter | Metric | Imperial |
|---|---|---|
| Tube OD | 12.7 ~ 31.75 mm | 1/4" ~ 1 1/4" (NPS) |
| Tube Wall Thickness | 1.65 ~ 3.0 mm | 0.065" ~ 0.118" |
| Tube Length | ≤ 18,500 mm | ≤ 60.7 ft |
| Fin Thickness | 0.3 ~ 0.5 mm | 0.0118" ~ 0.0197" |
| Fin Height | 0.9 ~ 1.3 mm | 0.0354" ~ 0.0512" |
| Fin Pitch | 666 ~ 1111 FPM | 16 ~ 30 FPI |
| Fin Type | Integral Low | |
| Tube Material | C.S., S.S., A.S., Copper, Titanium | |
| Applied Temperature | 415°C | |
Q1: Are you a trading company or a manufacturer?
A: We are a manufacturing factory and can accept OEM orders. You are welcome to visit our factory and inspect our products.
Q2: Can I request a sample?
A: Yes, you are welcome to place a sample order to test and check quality. Mixed samples are also acceptable.
Q3: What is the lead time for production?
A: Generally, samples require 1–3 days, and mass production requires 15–30 days, depending on your specific requirements.
Q4: What warranty do you provide for your products?
A: We provide a one-year warranty for our products.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube