DELLOK YONGHUI Aluminum 1100 Nickel Based Brazed Elliptical Finned Tube for Oval Finned Tube Heat Exchanger Applications
Aluminum 1100 Spiral Finned Tube
,Elliptical Brazed Spiral Finned Tube
DELLOK Aluminum 1100 Elliptical Nickel-Based Brazed Spiral Finned Tube
Manufactured by DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.), this elliptical finned tube combines an oval seamless base tube with a spirally wound aluminum fin tape, delivering compact heat exchanger construction, reduced air-side pressure drop, and reliable long-term performance in demanding industrial environments.
Established in 2002 and located in Jiangsu, China, DELLOK has grown into a substantial manufacturing operation with 66 million yuan in fixed assets, more than 200 employees, and 33 technical staff. The company operates 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons, 5 tube-drawing production lines, and 47 fin tube production lines — including one imported McElroy production line from the United States — with an annual production capacity of over 12 million meters.
Quality is the eternal pursuit at DELLOK. Meticulous workmanship, a standardized management system, and systematic quality assurance form the company's commitment to every customer. Quality control is not limited to final inspection; it is applied throughout the entire production process. Each batch of pipes is sampled, tested, and recorded as a quality guarantee for the finished product.
- Optimum functionality across a broad range of elliptical finned tube applications
- Provides optimum corrosion protection on the base tube
- Optimum tubing designs that provide an easy-to-clean interface
- Continuous outer sleeve that ensures no galvanic corrosion
- Tubes available in different material finishes, including titanium, stainless steel, aluminum, and other metal choices
- Designed under a high mechanical tension bonding process for an optimum usage interface
- Available in different diameters, thicknesses, and finishes
- Available in a range of material specification choices
- Can be applied without changing flow arrangement, shell size, or repositioning of piping
- Suitable for enhancing heat exchanger performance or reducing its size
- Designed to enhance the overall heat transfer surface area
- Optimum fin-to-tube bonding for exceptional usage efficiency
- Continuous outer sleeve finish eliminates galvanic corrosion
- Easy to clean and maintain interface
- Assists in enhancing the thermal performance of heat exchangers
- Provides a high rate of quicker dissipation and an optimum heat-transfer coefficient when used in equipment fitted with fin tubes
Elliptical fin tube is produced by setting rectangular or square-shaped fins over an oval tube. This fin tube (pipe) maximizes heat exchanger performance while minimizing heat transfer loss and pressure drop.
Both bare ends shall be zinc or aluminum metallized by an electrospray arc system coating.
An oval seamless tube is used as the base tube, and the finned tube is spirally wound with aluminum fin tape or copper fin tape under tension, tightly wound onto the outer surface of the base tube. Elliptical finned tube is combined with two different materials.
- The reflux zone and windward area are much smaller, reducing hydromechanics on the air side and lowering energy consumption
- Inside heat exchanger equipment, the oval tube bundle is more compact than a circular tube bundle, resulting in a smaller heat exchanger volume and lower cost
- The fins are not sensitive to typical mechanical loads, such as hailstorms or walking on the bundles
- The rectangular fins offer high strength, protecting the base tube from fracture in winter and prolonging tube life span
Elliptical finned tubes are applied in the heat exchanger field, oil refineries, the petrochemical industry, shipbuilding, power plants, refrigerators, steam engines, and evaporators.
- Carbon steel: A179, A192, SA210 Gr A1/C, A106 Gr B
- Stainless steel: TP304/304L, TP316/TP316L
- Copper: UNS12200 / UNS14200 / UNS70600, CuNi 70/30, CuNi 90/10
- Titanium: B338 Gr 2
- Aluminum (Alu. 1100, Alu. 1060)
- Copper
- Steel
Solid plain
Q: What is your lead time for production?
A: Generally, samples require 1–3 days, and mass production requires 15–30 days, depending on your request.
Q: What is the warranty for your products?
A: We provide a one-year warranty for our products.
Q: What payment terms do you accept?
A: Trade assurance, TT, and Western Union.
Q: What are the modes of transportation for the machines?
A: Air freight, sea freight, express delivery, and other options. We will choose the most suitable transportation method according to your requirements.
Product Category: Elliptical Finned Tube
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube