Copper L Finned Tube for Air Coolers Wound L Type Finned Tube Heat Transfer Solution
Air Coolers L Finned Tube
DELLOK Copper L Type Finned Tube is engineered for air cooler applications, offering an efficient and cost-effective heat transfer solution. The aluminum or copper fin strip is formed into an L shape and tension-wound onto the base tube, delivering reliable performance in low-temperature environments.
Established in 2002 and located in Jiangsu, China, DELLOK has grown into a leading manufacturer with 66 million yuan in fixed assets, over 200 employees, and 33 technical staff. Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines, including 1 imported McElroy production line from the United States
- Annual production capacity of over 12 million meters of finned tube
Quality is our eternal pursuit. Our meticulous production workshop, standardized management system, and systematic quality assurance reflect DELLOK's commitment to excellence. Quality control is not limited to final inspection — it is integrated throughout the entire production process. Each batch of pipes is sampled, tested, and recorded as a quality guarantee for the final product.
Manufactured similarly to the L fin type, except the base tube is knurled before wrapping the L-shaped fin strip. After wrapping, the fin foot is also knurled onto the base tube to increase the bond between tube and fin, resulting in enhanced heat transfer performance.
- Maximum operating temperature: 260°C
- Tube material: No theoretical limit
- Fin material: Aluminum or copper
Aluminum fin strip is formed into an L shape and then tension-wound onto the base tube.
- Maximum operating temperature: 150°C
- Fin material: Aluminum or copper
- Tube material: No theoretical limit
Aluminum fin strip is formed into an L shape and tension-wound onto the tube with overlapping fins, providing improved corrosion resistance.
- Maximum operating temperature: 180°C
- Fin material: Aluminum or copper
- Tube material: No theoretical limit
Applied fin tube is made with strip wrapped under tension around the base of the tube. Fins are welded to the base tube at the strip ends.
- Suitable for low-temperature applications
- Most cost-effective finning method compared to other types
- Failed fins can be easily removed during production, and the bare tube can be reused for finning
- No need to make a helical groove over the core tube
- Fins can be placed on very thin-walled tubes, particularly desirable when using expensive alloys as core tube
- Withstands temperatures up to 130°C without risk of atmospheric corrosion or thermal stress
- Often used as an alternative to the more expensive extruded type fin in corrosive environments
- Maximum operating temperature: 170°C
- Corrosion-resistant tubes
- Vibration resistance
- Withstands temperatures up to 320°C (608°F)
- High thermal performance and stress resistance combined with protection from air corrosion — a unique combination
- Any form of finned tube can be replaced with KL
| Property | Rating |
|---|---|
| Atmospheric Corrosion Resistance | OK |
| Mechanical Resistance | Poor |
| Fin Contact | Interference Fit |
| Fin-to-Tube Bond | Moderate |
| Heat Transfer Efficiency | Moderate |
- Petroleum, chemical, and petrochemical process industries
- Natural gas treatment
- Steel industry: blast furnace and converter systems
- Power generation: steam turbine exhaust condensing
- Contact condensing with cooling of circulating condensate
- Fossil and nuclear power plants
- Air conditioning (Freon, ammonia, propane)
- Incineration of household refuse
- Compressor coolers
- Air coolers in paper making, tobacco, and building heating industries
- Air heaters and spray drying systems (e.g., vegetable protein and starch in the food industry)
A finned tube is a tube with small fins around its outer surface. These fins act as a mechanism for transferring heat from the material inside the tube to or from the outer environment. Finned tubes are used in applications where heat is transferred from a hot fluid to a cooler fluid through the tube wall. The rate of heat transfer depends on three factors:
- The temperature difference between the two fluids
- The coefficient of heat transfer between each fluid and the wall
- The surface area of fluid exposure
Adopting the winding process, production efficiency is high, fin spacing is uniform, heat transfer is good, and the fin ratio is high. The base tube is protected from air erosion. The aluminum or copper fin strip is folded into an L shape and continuously spirally wound onto the outer surface of the base tube under tension.
- Maximum working temperature: 150°C (302°F)
- Atmospheric corrosion resistance: Acceptable
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
Built on the L-shaped foundation, the fin root completely covers the outer surface of the base tube. To some extent, this fin type guarantees better corrosion resistance.
- Maximum working temperature: 180°C (356°F)
- Atmospheric corrosion resistance: Acceptable
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
Before the fins are continuously wound onto the steel pipe surface, the outer surface of the base pipe undergoes a knurling process. After the fins are wound, the root of the fin attached to the steel pipe is also knurled to strengthen the combination of steel pipe and fins. This fin type ensures better heat transfer characteristics than L and LL types.
- Maximum working temperature: 260°C (500°F)
- Atmospheric corrosion resistance: Acceptable
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
Mainly used in air coolers across petrochemical, electric power, paper making, tobacco, and building heating industries. Also used in air heaters and spray drying systems for vegetable protein and starch in the food industry, blast furnace and converter systems, power generation (condensate exhaust from steam turbines, condensate contact cycle cooling condensation), fossil and nuclear power plants, air conditioners (Freon, ammonia, propane), waste incineration equipment, and compressor coolers.
We customize finned tubes according to individual customer requirements. For more details about L/LL/KL finned tubes, please contact us.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube