Aluminum LL Type Finned Tube Corrosion Resistant LL Finned Tube for Heat Exchanger
Aluminum LL Type Finned Tube
,DELLOK Aluminum Finned Tube
DELLOK Aluminum LL Type Finned Tube is a high-performance heat transfer component manufactured by winding an L-shaped aluminum fin strip under tension onto a base tube, with overlapping fin roots that fully cover the tube surface. This construction delivers enhanced corrosion resistance and reliable thermal performance, making it suitable for a wide range of industrial heat exchange applications.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and maintains a technical staff of 33.
Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines, including 1 imported line from the American brand McElroy
- Annual production capacity of 12 million meters or more
Quality is our eternal pursuit. Our production workshop operates with meticulous workmanship, a standardized management system, and systematic quality assurance. Quality control at DELLOK is not limited to final inspection — it spans the entire production process. Each batch of pipes is sampled and tested, with records kept as a quality guarantee for the final product.
Manufactured similarly to the L fin type, except that the base tube is knurled before wrapping the L-shaped fin strip. After wrapping, the fin foot is also knurled onto the base tube to increase the bond between tube and fin, resulting in improved heat transfer performance.
- Maximum operating temperature: 260 °C
- Tube material: No theoretical limit
- Fin material: Aluminum or copper
Aluminum fin strip is formed into an L shape and then tension-wound onto the base tube.
- Maximum operating temperature: 150 °C
- Fin material: Aluminum or copper
- Tube material: No theoretical limit
Aluminum fin strip is formed into an L shape and tension-wound onto the tube with overlapping fins, as illustrated in the figure below.
- Maximum operating temperature: 180 °C
- Fin material: Aluminum or copper
- Tube material: No theoretical limit
Applied fin tube is made with strip wrapped under tension around the base of the tube. Fins are welded to the base tube at the strip ends.
- Suitable for low-temperature applications
- Most cost-effective finning method compared to other types
- Failed fins can be easily removed during production, and the bare tube can be reused for finning
- No need to make a helical groove on the core tube
- Fins can be placed on very thin-walled tubes, which is particularly desirable when using expensive alloys as the core tube
- Withstands temperatures up to 130 °C without risk of atmospheric corrosion or thermal stress
- Often used as an alternative to the more expensive extruded fin type in corrosive environments
- Maximum operating temperature: 170 °C
- Corrosion-resistant tubes
- Vibration resistance
- Withstands temperatures up to 320 °C (608 °F)
- High thermal performance and stress resistance combined with protection from air corrosion — a unique combination
- Any form of finned tube can be replaced with KL type
| Property | Rating |
|---|---|
| Atmospheric Corrosion Resistance | OK |
| Mechanical Resistance | Poor |
| Fin Contact | Interference Fit |
| Fin-to-Tube Bond | Moderate |
| Heat Transfer Efficiency | Moderate |
- Petroleum, chemical, and petrochemical process industries
- Natural gas treatment
- Steel industry: blast furnace and converter systems
- Power generation: steam turbine exhaust condensing
- Contact condensing with cooling of circulating condensate
- Fossil and nuclear power plants
- Air conditioning (Freon, ammonia, propane)
- Incineration of household refuse
- Compressor coolers, etc.
A finned tube is a tube with small fins around its outer surface. These fins act as a mechanism for transferring heat from the material inside the tube to or from the outer environment. Finned tubes are used in applications where heat is transferred from a hot fluid to a cooler fluid through the tube wall. The rate of heat transfer depends on three factors:
- The temperature difference between the two fluids
- The coefficient of heat transfer between each fluid and the wall
- The surface area of fluid exposure
Adopting the winding process, this type offers high production efficiency, uniform fin spacing, good heat transfer, a high fin ratio, and protection of the base tube from air erosion. The aluminum or copper fin is folded into an L shape and continuously spirally wound onto the outer surface of the base tube under tension.
- Maximum working temperature: 150 °C (302 °F)
- Atmospheric corrosion resistance: Acceptable
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
Building on the L-shaped foundation, the fin root completely covers the outer surface of the base tube. To some extent, this fin type guarantees better corrosion resistance.
- Maximum working temperature: 180 °C (356 °F)
- Atmospheric corrosion resistance: Acceptable
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
Before the fins are continuously wound onto the steel pipe surface, the outer surface of the base pipe undergoes a knurling process. After the fins are wound, the root of the fin attached to the steel pipe is also knurled to strengthen the combination of steel pipe and fins. This fin type ensures better heat transfer characteristics than L and LL types.
- Maximum working temperature: 260 °C (500 °F)
- Atmospheric corrosion resistance: Acceptable
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
Mainly used in air coolers in petrochemical, electric power, paper making, tobacco, building heating, and other industries. Also used in air heaters and air heaters in spray drying systems such as vegetable protein and starch in the food industry. Additional applications include blast furnace and converter systems, power generation (condensate exhaust gas from steam turbines, condensate contact cycle cooling condensation, fossil and nuclear power plants), air conditioners (Freon, ammonia, propane), waste incineration equipment, compressor coolers, and more.
We customize finned tubes according to each customer's individual requirements. For more details about L / LL / KL finned tubes, please inquire with us.
Q: What is your lead time for production?
A: Generally, samples need 1–3 days; mass production needs 15–30 days, also depending on your request.
Q: What is the warranty for your products?
A: We provide a one-year warranty for our products.
Q: What payment terms do you accept?
A: Trade assurance, TT, and Western Union.
Q: What are the modes of transportation for machines?
A: Air freight, sea freight, express delivery, etc. We will choose the most suitable transportation method according to your requirements.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube