Continuous Spiral Crimped Finned Tube CNC Controlled Ring Die Spiral Finned Tube for Heat Exchangers
DELLOK Continuous Spiral Finned Tube
,Continuous Spiral Crimped Finned Tube
,Spiral Crimped Finned Tube
DELLOK Continuous Spiral Crimped Finned Tube
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) has been manufacturing finned tubes since 2002 from its facility in Jiangsu, China. The company operates 4 aluminum processing lines with an annual capacity exceeding 20,000 tons, 5 tube-drawing lines, and 47 fin tube production lines — including an imported McElroy line from the United States — delivering an annual output of more than 12 million meters.
Quality control at DELLOK is applied throughout the entire production process rather than only at final inspection. A comprehensive quality assurance system governs every stage, and each batch of pipes is sampled, tested, and recorded as a guarantee of final product quality.
Manufactured similarly to the L fin type, except that the base tube is knurled before the L-shaped fin strip is wrapped. After wrapping, the fin foot is also knurled onto the base tube to increase the bond between tube and fin, resulting in improved heat transfer performance.
- Maximum operating temperature: 260 °C
- Tube material: no theoretical limit
- Fin material: aluminium or copper
Aluminium fin strip is formed into an L shape and then tension-wound onto the base tube.
- Maximum operating temperature: 150 °C
- Fin material: aluminium or copper
- Tube material: no theoretical limit
Aluminium fin strip is formed into an L shape and tension-wound onto the tube with overlapping fins.
- Maximum operating temperature: 180 °C
- Fin material: aluminium or copper
- Tube material: no theoretical limit
Applied fin tube is produced by wrapping strip under tension around the base of the tube. The fins are then welded to the base tube at the strip ends to secure the assembly.
- Suitable for low-temperature applications.
- The most cost-effective finning method compared with other types.
- Failed fins can be easily removed during production, and the bare tube can be reused for finning.
- No helical groove is required on the core tube.
- Fins can be applied to very thin-walled tubes — particularly desirable when using expensive alloys as the core tube.
- Withstands temperatures up to 130 °C without risk of atmospheric corrosion or thermal stress.
- Often used as an alternative to the more expensive extruded fin type in corrosive environments.
- Maximum operating temperature: 170 °C.
- Corrosion-resistant construction.
- Vibration resistance.
- Withstands temperatures up to 320 °C (608 °F).
- Combines high thermal performance and stress resistance with protection from air corrosion.
- Can replace any other form of finned tube.
| Property | Rating |
|---|---|
| Atmospheric Corrosion Resistance | OK |
| Mechanical Resistance | Poor |
| Fin Contact | Interference Fit |
| Fin-to-Tube Bond | Moderate |
| Heat Transfer Efficiency | Moderate |
- Petroleum, chemical, and petrochemical process industries
- Natural gas treatment
- Steel industry: blast furnace and converter systems
- Power generation: steam turbine exhaust condensing
- Contact condensing with cooling of circulating condensate
- Fossil and nuclear power plants
- Air conditioning (Freon, ammonia, propane)
- Incineration of household refuse
- Compressor coolers and similar heat exchange equipment
Features: The winding process delivers high production efficiency, uniform fin spacing, good heat transfer, and a high finning ratio, while protecting the base tube from air erosion.
A finned tube is a tube with small fins around its outer surface. These fins act as a mechanism for transferring heat from the material inside the tube to or from the surrounding space. Finned tubes are used where heat is transferred from a hot fluid to a cooler fluid through the tube wall. The rate of heat transfer depends on three factors:
- The temperature difference between the two fluids.
- The coefficient of heat transfer between each fluid and the wall.
- The surface area of fluid exposure.
Adopting the winding process, this type offers high production efficiency, uniform fin spacing, good heat transfer, and a high finning ratio, while protecting the base tube from air erosion. Aluminum or copper fin strip is folded into an L shape and continuously spirally wound onto the outer surface of the base tube under tension.
- Maximum working temperature: 150 °C (302 °F)
- Atmospheric corrosion resistance: acceptable
- Mechanical resistance: poor
- Common fin materials: aluminum and copper
Building on the L-shaped foundation, the fin root completely covers the outer surface of the base tube. To some extent, this fin type guarantees better corrosion resistance.
- Maximum working temperature: 180 °C (356 °F)
- Atmospheric corrosion resistance: acceptable
- Mechanical resistance: poor
- Common fin materials: aluminum and copper
Before the fins are continuously wound onto the steel pipe, the outer surface of the base pipe undergoes a knurling process. After winding, the fin root attached to the steel pipe is also knurled to strengthen the bond between pipe and fins. This fin type therefore delivers better heat transfer characteristics than L and LL fins.
- Maximum working temperature: 260 °C (500 °F)
- Atmospheric corrosion resistance: acceptable
- Mechanical resistance: poor
- Common fin materials: aluminum and copper
L/LL/KL finned tubes are mainly used in air coolers for the petrochemical, electric power, paper making, tobacco, and building heating industries, as well as in air heaters and air heaters within spray drying systems — such as those used for vegetable protein and starch in the food industry. Additional uses include blast furnace and converter systems, power generation (condensate exhaust from steam turbines, condensate contact cycle cooling and condensation, fossil and nuclear power plants), air conditioners (Freon, ammonia, propane), waste incineration equipment, and compressor coolers.
Finned tubes are customized to individual customer requirements. For further details on L/LL/KL finned tube specifications, please contact us.
What is the lead time for production?
Samples generally require 1–3 days; mass production requires 15–30 days, depending on your request.
What warranty is provided for your products?
We provide a one-year warranty on our products.
What payment terms do you accept?
Trade assurance, TT, and Western Union.
What modes of transportation are available?
Air freight, sea freight, and express delivery. We will select the most suitable method according to your requirements.
Product category: L/LL/KL Finned Tube
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube