Carbon Steel KL Finned Tube Energy Saving Automatic Knurled Finned Tube for Heat Exchanger
DELLOK KL Finned Tube
,Carbon Steel KL Finned Tube
,KL Finned Tube
DELLOK Carbon Steel KL Finned Tube is a high-performance heat transfer component manufactured by YONGHUI RADIATING PIPE MANUFACTURING CO., LTD. The KL finned tube is produced by knurling the base tube before wrapping the L-shaped fin strip, then knurling the fin foot onto the base tube to increase the bonding between tube and fin. This construction delivers enhanced heat transfer performance and is suitable for demanding industrial applications.
Key Specifications:
Fin Type: L / LL / KL Finned Tube
Tube Material: Carbon steel, stainless steel, copper, aluminum
Fin Material: Copper, aluminum
Fin Tube Length: No limit
Working Temperature: Up to 260°C (KL type)
Features: High production efficiency, uniform fin spacing, excellent heat transfer, high fin ratio, and protection of the base tube from air erosion.
Manufactured similarly to the L fin, except that the base tube is knurled before wrapping the L-shaped fin strip. After wrapping, the fin foot is also knurled onto the base tube to increase the bond between tube and fin, resulting in increased heat transfer performance.
- Maximum Operating Temperature: 260°C
- Tube Material: No theoretical limit
- Fin Material: Aluminum or copper
Aluminum fin strip is formed into an L shape and then tension-wound onto the base tube.
- Maximum Operating Temperature: 150°C
- Fin Material: Aluminum or copper
- Tube Material: No theoretical limit
Aluminum fin strip is formed into an L shape and tension-wound onto the tube with overlapping fins, providing improved corrosion resistance over the standard L type.
- Maximum Operating Temperature: 180°C
- Fin Material: Aluminum or copper
- Tube Material: No theoretical limit
Applied fin tube is made with strip wrapped under tension around the base of the tube. Fins are welded to the base tube at the strip ends.
- Suitable for low-temperature applications.
- Most cost-effective finning method compared to alternatives.
- Failed fins can be easily removed during production, and the bare tube can be reused for finning.
- No need to make a helical groove over the core tube.
- Fins can be placed on very thin-walled tubes, which is particularly desirable when using expensive alloys as the core tube.
- The tube can withstand temperatures up to 130°C without the risk of atmospheric corrosion or thermal stress.
- Often used as an alternative to the more expensive extruded type fin in corrosive environments.
- Maximum operating temperature: 170°C.
- Corrosion-resistant tubes.
- Vibration resistance.
- Can withstand temperatures up to 320°C (608°F).
- High thermal performance and stress resistance combined with protection from air corrosion — a one-of-a-kind combination.
- Any form of finned tube can be replaced with KL.
| Property | Rating |
|---|---|
| Atmospheric Corrosion Resistance | OK |
| Mechanical Resistance | Poor |
| Fin Contact | Interference Fit |
| Fin-to-Tube Bond | Moderate |
| Heat Transfer Efficiency | Moderate |
- Petroleum, chemical, and petrochemical process industries
- Natural gas treatment
- Steel industry: blast furnace and converter systems
- Power generation: steam turbine exhaust condensing
- Contact condensing with cooling of circulating condensate
- Fossil and nuclear power plants
- Air conditioning (Freon, ammonia, propane)
- Incineration of household refuse
- Compressor coolers, etc.
Finned tubes are also widely used in air coolers in the petrochemical, electric power, paper making, tobacco, and building heating industries, as well as in air heaters and spray drying systems for vegetable protein and starch in the food industry.
A finned tube is a tube with small fins around its outer surface. These fins act as a mechanism for transferring heat from the material inside the tube to or from the outer environment. Finned tubes are used in applications where heat is transferred from a hot fluid to a cooler fluid through the tube wall. The rate at which this heat transfer occurs depends on three factors:
- The difference in temperature between the two fluids.
- The coefficient of heat transfer between each fluid and the wall.
- The surface area of fluid exposure.
Adopting the winding process, production efficiency is high, fin spacing is uniform, heat transfer is good, the fin ratio is high, and the base tube is protected from air erosion. The aluminum or copper fin is folded into an L shape and continuously spirally wound on the outer surface of the base tube under tension.
- Maximum working temperature: 150°C (302°F)
- Atmospheric corrosion resistance: Acceptable
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
Building on the L-shaped foundation, the fin root completely covers the outer surface of the base tube. To some extent, this fin type guarantees better corrosion resistance.
- Maximum working temperature: 180°C (356°F)
- Atmospheric corrosion resistance: Acceptable
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
Before the fins are continuously wound onto the surface of the steel pipe, the outer surface of the base pipe undergoes a knurling process. After the fins are wound, the root of the fin attached to the steel pipe is also knurled to strengthen the combination of the steel pipe and fins. This fin type ensures better heat transfer characteristics than L and LL fins.
- Maximum working temperature: 260°C (500°F)
- Atmospheric corrosion resistance: Acceptable
- Mechanical resistance: Poor
- Common fin materials: Aluminum and copper
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now has 66 million yuan in fixed assets, more than 200 employees, and 33 technical staff.
The company operates 4 aluminum processing production lines with an annual processing capacity of over 20,000 tons, 5 tube-drawing production lines, and 47 fin tube production lines, including 1 imported production line from the American brand McElroy, with an annual production capacity of 12 million meters or more.
Quality is the eternal pursuit at DELLOK. The production workshop features meticulous work, a standardized management system, and systematic quality assurance. Quality control is not limited to final process detection but extends throughout the entire production process. Each batch of pipes is sampled and tested, and records are kept as a quality guarantee for the final product.
Q: What is your lead time for production?
A: Generally, samples need 1–3 days, and mass production needs 15–30 days, also depending on your request.
Q: What is the warranty for your products?
A: We provide a one-year warranty for our products.
Q: What payment terms do you accept?
A: Trade assurance, TT, Western Union.
Q: What are the modes of transportation for machines?
A: Air freight, sea freight, express delivery, etc. We will choose the most suitable transportation method according to your requirements.
We customize finned tubes according to individual customer requirements. For more details about L/LL/KL finned tubes, please contact us.
Product Category: L/LL/KL Finned Tube
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube