Integral Low Fin Tube for Heat Exchangers Chilling - Integral Low Finned Tube
Chilling Integral Low Finned Tubes
,DELLOK Integral Low Finned Tubes
,Heat Exchangers Low Finned Tubes
Dellok (YONGHUI Radiating Pipe Manufacturing Co., Ltd.) was established in 2002 and is located in Nanjing, China. In 2022, we joined HARBIN AIR CONDITIONING CO., LTD., becoming one of the most professional industry manufacturers in China.
After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff. Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from the American brand McElroy
Our annual production capacity exceeds 12 million meters.

Integral fin tubes were developed to increase the heat transfer performance of fluids while reducing the physical size and cost of the heat exchanger. In these tubes, the fins are rolled out from the wall of the tube and are therefore integral with the tube. Because the fins are formed from the base tube by rolling out material from its wall, the wall thickness under the finned section is reduced compared to the wall thickness at the plain ends. These fin tubes can be manufactured from most tubular materials, and the hardness of the material usually determines the finning code or fin profile.

The tube and fin are made from the same material. After the rolling process, the outer surface of the tube is formed with threads, which gives the finned tube a higher heat transfer capacity.

- Provides 3 times the external surface area of a bare tube.
- Helps the cold condensate drop at the bottom of the tube, reducing the liquid film and thermal resistance while improving heat transfer efficiency.
- Integral low fin tubing yields numerous benefits for shell and tube heat exchangers, including reduced size and cost for new equipment and increased performance of existing equipment.
- The cost of shell and tube heat exchangers can be reduced by up to 50% through the proper application of low fin tubing.

- Heating systems
- Ventilation systems
- Refrigeration and climate control systems
- Mechanical engineering
- Automotive manufacturing
- Chemicals, petrochemical, and power plant technology

Fin efficiency is defined as the ratio of the actual heat flow of the fin to that which would be obtained with a fin of constant temperature uniformly equal to the base surface temperature — that is, one with infinite thermal conductivity.
A low finned tube is a finned tube obtained through plastic cold deformation. The method consists of realizing, from a smooth tube, fins with a particular geometric form without removing material. This plastic deformation increases heat exchange efficiency and allows the heat exchanger size to be reduced.
Low finned tubes involve rotational processing of the outer surface of steel tubes to create a fin shape. A steel pipe length of 25.4 mm (1 inch) per fin with 19 fins is a design often used. We can also produce units with 26 fins.
- Provides 2.5 to 3 times the external surface area of a bare tube
- Reduced capital cost for new equipment
- Reduced retrofitting cost for existing equipment
- Space, weight, and structural savings
- More materials and alloys to select from
- Reduced maintenance and life cycle cost
Low finned tubes are a reliable solution for controlling the temperature of gases and liquids, or for evaporating and condensing refrigerants. Thanks to their larger heat transfer surface area, they offer considerable potential to save on materials and fill volumes, especially when applied to air and other gases on the fin side and a fluid on the tube side. They are used in heat exchangers for oil refineries and petrochemical plants, condensers and heat exchangers for petrochemical plants, and condensers and evaporators for power plants.
We always put quality first for our customers and control it from raw material inspection through production checking to water pressure and strength testing. Third-party inspection can also be authorized. Our quality documentation includes:
- Incoming inspection report for bare tube and strip
- Mill test certification for bare tube
- Mill test certification for fin
- Mill test certification for finned tube
- Finned tube dimension and visual inspection reports
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube