High Efficient Copper Low Fin Tube and Integral Low Finned Tube with Customized Size for Heat Exchangers
low fin tubes for heat exchangers
,integral low fin tubes
Dellok Young is a professional heat exchanger factory with 20 years of experience, providing one-stop heat transfer solutions tailored to your application — including metallurgy, food, petrochemical, pharmaceutical, beverage, wastewater, and refrigeration.
As a manufacturer integrating R&D, design, production, and sales, we produce a wide range of heat exchangers used mainly in petrochemical, electric power, papermaking, building heating, and mining industries. Typical applications include air heaters and spray drying systems for plant protein powder, starch, and other food-industry processes.
Our production plant covers approximately 18,000 square meters and is equipped with multiple professional CNC and automated production machines. We maintain a dedicated technical innovation team and professional after-sales personnel, and have obtained a number of professional certificates and patents.
Our experienced foreign trade team cooperates with partners across many regions. Global partners have conducted on-site inspections of our production facilities, were highly satisfied with the results, and have established long-term strategic cooperative relationships with us.
The Integral Low Fin tube is produced by direct extrusion of the tube surface, which increases the surface area and improves the thermal performance of the heat exchanger without changing or enlarging the shell size. Integral Low Fin tubes are supplied straight and/or as U-bent tubes, annealed in the U-bend zone, and hydro-tested after bending. We can also supply fin tubes with skipped fin sections at baffle points where vibration in the heat exchanger is possible.
The tube and fin are made of the same material. After the rolling process, a thread is formed on the outer surface of the tube, giving the finned tube a higher heat transfer capacity.
- Increased surface area for heat transfer
- Smaller heat exchanger footprint and fewer heat exchangers required
- Reduced equipment and installation costs
- Debottlenecking of existing heat exchangers
- Upgrading to corrosion-resistant alloys without sacrificing heat transfer efficiency
- Reduced fouling (in some cases)
| Product Specification | Metric | Imperial |
|---|---|---|
| Tube OD | 12.7–31.75 mm | 1/4"–1 1/4" (NPS) |
| Tube Wall Thickness | 1.65–3.0 mm | 0.065"–0.118" |
| Tube Length | ≤ 18,500 mm | ≤ 60.7 ft |
| Fin Thickness | 0.3–0.5 mm | 0.0118"–0.0197" |
| Fin Height | 0.9–1.3 mm | 0.0354"–0.0512" |
| Fin Pitch | 666–1111 FPM | 16–30 FPI |
| Fin Type | Integral Low | |
| Tube Material | C.S., S.S., A.S., Copper, Titanium | |
| Applied Temperature | 415 °C | |
Quality is our top priority for customers. We control quality from raw material inspection and in-process production checking through to water pressure testing and strength testing. Third-party inspection can also be authorized. Incoming inspection reports are provided for bare tube and strip.
A low finned tube is a finned tube obtained through plastic cold deformation. The process creates fins with a particular geometric form directly from a smooth tube without removing material. This plastic deformation increases heat exchange efficiency and allows the heat exchanger size to be reduced.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube