Stainless Steel Integral Low Fin Tube for Heat Exchanger and Condenser Applications
low fin tubes for heat exchangers
,integral low fin tubes
Dellok Stainless Steel Integral Low Fin Tube
Integral fin tubes were developed to increase the heat transfer performance of fluids while reducing the physical size and cost of the Heat Exchanger. In these tubes, the fins are rolled out from the wall of the tube and are therefore integral with the tube itself. Because the fins are formed from the base tube by rolling out material from its wall, the wall thickness under the finned section is reduced compared to the wall thickness at the plain ends. These fin tubes can be manufactured from most tubular materials, and the hardness of the material usually determines the finning code or fin profile.
Dellok (YONGHUI Radiating Pipe Manufacturing Co., Ltd.) was established in 2002 and is located in Nanjing, China. We joined HARBIN AIR CONDITIONING CO., LTD. in 2022 and became the most professional industry manufacturer in China. After many years of development, the company now has 66 million yuan in fixed assets, more than 200 employees, and 33 technical staff.
We operate 4 aluminum processing production lines with an annual processing capacity of more than 20,000 tons, 5 tube-drawing production lines, and 47 fin tube production lines — including 1 imported production line from the American brand McElroy — with an annual production capacity of 12 million meters and above.
Quality is the eternal pursuit of our success.
The tube and fin are made of the same material. After the rolling process, the outer surface of the tube is formed with a thread, which gives the finned tube a higher heat transfer capacity.
- Low fin tube provides 3 times the external surface area of a bare tube.
- It helps the cold condensate drop at the bottom of the tube, reducing the liquid film and thermal resistance while improving heat transfer efficiency.
- Integral low fin tubing yields numerous benefits for shell and tube heat exchangers, including reduced size and cost for new equipment and increased performance of existing equipment.
- The cost of shell and tube heat exchangers can be reduced by up to 50% through the proper application of low fin tubing.
Integral low fin tubes are widely used in the chemical, petrochemical, and petroleum industries. Typical applications include condensers, oil coolers, water heaters, heat exchangers, evaporators, and heat-recoverers.
| Parameter | Metric | Imperial |
|---|---|---|
| Tube OD | 12.7~31.75 (mm) | 1/4"~1 1/4" (NPS) |
| Tube Wall Thickness | 1.65~3.0 (mm) | 0.065"~0.118" |
| Tube Length | ≤18,500 (mm) | ≤60.7 ft |
| Fin Thickness | 0.3~0.5 (mm) | 0.0118"~0.0197" |
| Fin Height | 0.9~1.3 (mm) | 0.0354"~0.0512" |
| Fin Pitch | 666~1111 FPM | 16~30 FPI |
| Fin Type | Integral Low | |
| Tube Material | C.S., S.S., A.S., Copper, Titanium | |
| Applied Temperature | 415°C | |
Fin efficiency is defined as the ratio of the actual heat flow of the fin to that which would be obtained with a fin of constant temperature uniformly equal to the base surface temperature — that is, one with infinite thermal conductivity.
A low finned tube is a finned tube obtained through plastic cold deformation. The method consists of realizing, from a smooth tube, fins with a particular geometric form without removing material. This plastic deformation increases heat exchange efficiency and allows the heat exchanger size to be reduced.
Low finned tubes involve rotational processing of the outer surface of steel tubes to create a fin shape. A steel pipe length of 25.4 mm (1 inch) per fin with 19 fins is a design often used. We can also produce units with 26 fins.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube